DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice. Please check our website for latest information. Document 1005C-1 Revised 09/08/15 Document 1005C-1 Core material Ferrite Environmental RoHS compliant, halogen free Weight 13 – 23 mg Terminations RoHS compliant silver-palladium-platinum-glass frit. Ambient temperature –40°C to +125°C Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Dimensions are in inches mm 4 3 Common Mode Chokes – PFD2015 1. When ordering, please specify packaging code: PFD2015-103MEC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 3. DCR is for each winding. 4. Interwinding isolation for one minute 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
- Miniature surface mount component, only 2.2 × 1.45 mm footprint and 1.5 mm tall
- Eliminates virtually all common mode noise
- Designed for high-speed applications
- Nine values to meet your specific requirements
- Low DCR values 0.059 1,5 max max0.060 1,52 0.017 0,432 0.044 1,118 0.028 0,711 0.016 0,406 0.022 0,559 0.054 1,36 0.014 ±0.003 0,356 ±0,076 0.010 0,25 Recommended Land Pattern max0.090 2,29 4 3 1 2 4 3 DCR Inductance2 max3 Isolation 4 Irms5 Part number1 min (µH) (Ohms) (Vrms) (A) PFD2015-102ME_ 0.80 0.165 250 0.800 PFD2015-122ME_ 0.96 0.175 250 0.750 PFD2015-182ME_ 1.44 0.294 250 0.490 PFD2015-272ME_ 2.16 0.477 250 0.410 PFD2015-332ME_ 2.64 0.670 250 0.370 PFD2015-472ME_ 3.76 1.00 250 0.260 PFD2015-682ME_ 5.44 1.75 250 0.187 PFD2015-822ME_ 6.56 2.50 250 0.150 PFD2015-103ME_ 8.00 3.40 250 0.130
Specifications subject to change without notice. Please check our website for latest information. Document 1005C-2 Revised 09/08/15 Document 1005C-2 PFD2015 Common Mode Chokes Typical Attenuation (Ref: 50 Ohms) Typical Impedance vs Frequency 100 0.1 0.01 0.001 Impedance (kOhms) 0.1 11 0 1000100 Frequency (MHz) -102 -182 -103 -682 -332 -102-182-103 -682 -332 0.1 0.1 1000 1000 100 100 Atten uation (dB Atten uation (dB) Frequency (MHz) Frequency (MHz) Common mode Differential mode -102 -182 -103 -682 -332