PFCU-1500 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Single-phase AC input, 85VAC ~ 265VAC input voltage, 45Hz ~ 65 Hz input frequency
  • 395VDC output voltage
  • Up to 1500W output power
  • 50kHz switching frequency
  • Near unity power factor
  • Maximum 6% total harmonic current distortion at 220VAC, 1500W
  • Over voltage, under voltage, over temperature protection, and instantaneous input current protection.
  • Base plate rated to 100 oC Block Diagram N L Average Current Controller DC+ DC- DC/DC Voltage Regulator +12V +Vref L_EN COM ON Enable TEMP SensorTEMP 100 ohm Inrush current resistor 15 ohm Figure 1 Block diagram of 1500W single-phase PFC Converter

S E M I C O N D U C T O R PFCU-1500 TECHNICAL DATA DATA SHEET 4158, REV. E

  • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • Table 1 Electrical Characteristics (TA=25 oC, unless otherwise specified) PARAMETER SYMBOL MIN TYP MAX UNIT INPUT Input Voltage V in 85 265 VAC Input Frequency f 45 65 Hz Startup Input Voltage 75 80 85 V Soft Start Time I0=0 A, Output filter capacitor = 1400μF 0.7 1.5 sec Inrush Current I0=0 A 22 50 A OUTPUT I0=0.4A 390 395 400 V Output Voltage I0=4.0A 376 380 383 V Output Power (See note 1) P 0 1500 W PROTECTION Over Output Voltage Protection (Latching) 460 VDC Over Instantaneous Input Current Protection (Auto Recovery) 59 A Thermal Protection (Auto Recovery) 100 oC MISCELLANEOUS Operating Temperature (See note 2) T A -55 100 oC Thermal Resistance (Junction to Case) R өjc 0.09 oC/W Isolation (Input to Case) 1500 VAC ELECTRICAL PERFORMANCE Power Factor PF 0.99 Vin= 85VAC 3 4 Vin= 220VAC 3 4 I0=2 A Vin= 265VAC 4 7 Vin= 85VAC Vin= 220VAC Total Harmonic Current Distortion (See note 1) I0=4 A Vin= 265VAC ATHD 3 6 % Vin= 85VAC 88 Vin= 220VAC 92 I0=2 A Vin= 265VAC 93 Vin= 85VAC 84 Vin= 220VAC 93 Efficiency I0=4 A Vin= 265VAC η

S E M I C O N D U C T O R PFCU-1500 TECHNICAL DATA DATA SHEET 4158, REV. E

  • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • MECHANICAL OUTLINE

S E M I C O N D U C T O R PFCU-1500 TECHNICAL DATA DATA SHEET 4158, REV. E

  • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • DISCLAIMER: 1- The information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchas ers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user’s units according to the datas heet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.