PFC-D TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

TaNFilm® Precision Chip Voltage Divider PFC Divider Series Popular 1206 Chip Size 10Ω to 150KΩ per resistor Tested for COTS applications Superior alternative to matched sets Standard Sn/Pb and 100% tin (Pb-free) terminations available PFC Series Issue January 2009 Sheet 3 of 3

  • 4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TaNFilm® Precision Chip Voltage Divider Prefix PFC - D1206 - 03 - 1003 - 3301 - F B Model D1206 - Divider network w/ standard Sn/Pb termination D1206LF - Divider network w/ 100% tin, Pb-free termination TCR Code* 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C R1 Resistance Code Standard 4-Digit resistance code. Ex: 1002 = 10KΩ; 50R0 = 50Ω R2 Resistance Code Standard 4-Digit resistance code Absolute Tolerance* Ratio Tolerance* Ordering Data Packaging Data PACKAGING ON 8mm TAPE USER DIRECTION OF FEED * For tighter tolerance and tighter TCR requirements, please refer to IRC’s Ultra Precision datasheet. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Range of Lowest Resistor Available Absolute Tolerances Available Ratio Tolerances Best Absolute TCR Best Tracking TCR 10Ω - 24Ω F F D ±100ppm/°C ±50ppm/°C 25Ω - 50Ω F D B F D B ±50ppm/°C ±20ppm/°C 51Ω - 75Ω F D B F D B ±25ppm/°C ±10ppm/°C 76Ω - 999Ω F D B F D B A ±25ppm/°C ±5ppm/°C 1.0KΩ - 100KΩ F D B A F D B A Q T ±25ppm/°C ±5ppm/°C Manufacturing Capability General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com PFC Series Issue January 2009 Sheet 1 of 3 TaNFilm® Precision Chip Voltage Divider PFC Divider Series
  • Popular 1206 Chip Size
  • 5Ω to 150KΩ per resistor
  • Tested for COTS applications
  • Superior alternative to matched sets
  • Standard Sn/Pb and 100% tin (Pb-free) terminations available IRC now has a perfect voltage divider solution. Designed around the 1206 sized chip, the PFC Divider series provides a single package solution that is compatible with your automatic placement equipment. The ratio tolerance can be specified down to 0.05%* which is much tighter than the 0.2% achievable from two individual 0.1% chip resistors. Similarly, the TCR tracking of 5 ppm/°C is far superior to the tracking obtainable from two individual 25 ppm/°C chip resistors. IRC’s TaNFilm ® Tantalum Nitride film system provides superior environmental performance while insuring long term life stability. This dual element, monolithic package offers the advantages of reducing component quantities and board space while increasing quality and reliability. For a precision voltage divider network in a small package solution, specify IRC TaNFilm® PFC Dividers. Electrical Data Characteristic Each Resistor Total Resistance Resistance Range 10 - 150KΩ 200KΩ Power Rating 125mW 250mW Absolute TCR to ±25ppm/°C* Tracking TCR to ±5ppm/°C* Maximum Voltage Rating 100 volts Operating Temperature Range -65°C to +150°C Noise Less than -25 db Termination 60/40 Sn/Pb or 100% tin (Pb-free) *Tighter Tolerance and Higher Resistance value available. Contact factory for more information This dual element, monolithic package offers the advantages of reducing component quantities and board space while increasing quality and reliability. The ratio tolerance can be specified down to 0.01%, which is much tighter than the 0.1% achievable from two individual 0.05% chip resistors. Similarly, the TCR tracking of 5 ppm/°C is far superior to the 50ppm/°C tracking obtainable from two individual 25 ppm/°C chip resistors. The TaNFilm® Tantalum Nitride film system provides superior environmental performance while ensuring long term stability. Resistors Make Possible 12.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)

TaNFilm® Precision Chip Voltage Divider PFC Divider Series PFC Series Issue January 2009 Sheet 2 of 3

  • 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TaNFilm® Precision Chip Voltage Divider Test Method ∆R/R ∆Ratio Thermal Shock MIL-STD-202 -65 to +125°C, 5 Cycles ±.02% ±.005% Short Time Overload MIL-PRF-55342 ±.02% ±.005% High Temperature Exposure MIL-PRF-55342 ±.03% ±.01% Resistance to Bond Exposure MIL-PRF-55342 ±.01% ±.01% Moisture Resistance MIL-STD-202

10 Cycles, 240 hours

10% Rated Power ±.03% ±.02% Load Life (Rated Power) MIL-PRF-55342 Low Temperature Operation MIL-PRF-55342 ±.01% ±.005% Recommended Solder Pad Physical Data TOP SIDE BOTTOM 0.035" 0.0315"0.058" 0.0895" 0.0725" 0.180" 0.050" 0.0225” 0.015± 0.005"" 0.030" min 0.058" ±.005” 0.010" ±0.004” 0.027" ±0.003” 0.126 ±0.006" ” 0.015 ±0.005" ” 0.024 ±0.004"" R1R1 0.063" ±.005” Dimensions are in inches Environmental Data PFC Series Issue January 2009 Sheet 2 of 3

  • 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TaNFilm® Precision Chip Voltage Divider Test Method ∆R/R ∆Ratio Thermal Shock MIL-STD-202 -65 to +125°C, 5 Cycles ±.02% ±.005% Short Time Overload MIL-PRF-55342 ±.02% ±.005% High Temperature Exposure MIL-PRF-55342 ±.03% ±.01% Resistance to Bond Exposure MIL-PRF-55342 ±.01% ±.01% Moisture Resistance MIL-STD-202

10% Rated Power ±.03% ±.02% Load Life (Rated Power) MIL-PRF-55342 Low Temperature Operation MIL-PRF-55342 ±.01% ±.005% Recommended Solder Pad Physical Data TOP SIDE BOTTOM 0.035" 0.0315"0.058" 0.0895" 0.0725" 0.180" 0.050" 0.0225” 0.015± 0.005"" 0.030" min 0.058" ±.005” 0.010" ±0.004” 0.027" ±0.003” 0.126 ±0.006" ” 0.015 ±0.005" ” 0.024 ±0.004"" R1R1 0.063" ±.005” Dimensions are in inches Environmental Data PFC Series Issue January 2009 Sheet 3 of 3

  • 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TaNFilm® Precision Chip Voltage Divider Prefix PFC - D1206 - 03 - 1003 - 3301 - F B Model D1206 - Divider network w/ standard Sn/Pb termination D1206LF - Divider network w/ 100% tin, Pb-free termination TCR Code* 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C R1 Resistance Code Standard 4-Digit resistance code. Ex: 1002 = 10KΩ; 50R0 = 50Ω R2 Resistance Code Standard 4-Digit resistance code Absolute Tolerance* Ratio Tolerance* Ordering Data Packaging Data PACKAGING ON 8mmTAPE USER DIRECTION OF FEED * For tighter tolerance and tighter TCR requirements, please refer to IRC’s Ultra Precision datasheet. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Range of Lowest Resistor Available Absolute Tolerances Available Ratio Tolerances Best Absolute TCR Best Tracking TCR 5Ω - 24Ω F F D ±100ppm/°C ±50ppm/°C 25Ω - 50Ω F D B F D B ±50ppm/°C ±20ppm/°C 51Ω - 75Ω F D B F D B ±25ppm/°C ±10ppm/°C 76Ω - 999Ω F D B F D B A ±25ppm/°C ±5ppm/°C 1.0KΩ - 100KΩ F D B A F D B A Q T ±25ppm/°C ±5ppm/°C Manufacturing Capability Make Possible 12.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com

TaNFilm® Precision Chip Voltage Divider PFC Divider Series This dual element, monolithic package offers the advantages of reducing component quantities and board space while increasing quality and reliability. The ratio tolerance can be specified down to 0.01%, which is much tighter than the 0.1% achievable from two individual 0.05% chip resistors. Similarly, the TCR tracking of 5 ppm/°C is far superior to the 50ppm/°C tracking obtainable from two individual 25 ppm/°C chip resistors. The TaNFilm® Tantalum Nitride film system provides superior environmental performance while ensuring long term stability. Ordering Procedure This product has two valid part numbers: European (Welwyn) Part Number: D120602-1K0-3K3FB (50ppm/°C, R1=1 kilohm, R2=3.3 kilohms, absolute tolerance ±1%, ratio tolerance ±0.1%, Pb-free) D 1 2 0 6 0 2 - 1 K 0 - 3 K 3 F B 1 2 3 4 5 6 7 8 USA (IRC) Part Number: PFC-D1206LF-02-1001-3301-FB (50ppm/°C, R1=1 kilohm, R2=3.3 kilohms, absolute tolerance ±1%, ratio tolerance ±0.1%, Pb-free) P F C - D 1 2 0 6 L F - 0 2 - 1 0 0 1 - 3 3 0 1 - F B 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Type Size Absolute TCR Value R1 Value R2 Absolute Tolerance Ratio Tolerance Termination & Packing D=PFC- Divider

1206 Omit for ±25ppm/°C E24 = 3/4 characters

E96 = 3/4 characters R = ohms K = kilohms A = 0.05% T = +0.01% Omit for Pb-free, Standard pack02 = ±50ppm/°C B = ±0.1% Q = ±0.02% 01 = ±100ppm/°C D = ±0.5% A = ±0.05% PB = SnPb finish, Standard packF = ±1% B = ±0.1% D = ±0.5% 1000/reel F = ±1% 1 2 3 4 5 6 7 8 Family Model Termination Absolute TCR Value Value Absolute Tolerance Ratio Tolerance Packing PFC D1206 Omit for SnPb (60/40) 03 = ±25ppm/°C 3 digits + multiplier A = ±0.05% T = +0.01% 1000/reel 02 = ±50ppm/°C R = ohms for values <100 ohms LF = Pb-free (100%Sn) F = ±1% B = ±0.1% D = ±0.5% F = ±1% Make Possible 12.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com