PF5102 FAIRCHILD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
©2003 Fairchild Semiconductor Corporation Rev. A, January 2003 PF5102 TO-92 Absolute Maximum Ratings * TA=25°C unless otherwise noted * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1. These ratings are based on a maximum junction temperature of 150 degrees C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics TA=25°C unless otherwise noted * Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 1.0% Thermal Characteristics TA=25°C unless otherwise noted Symbol Parameter Value Units VDG Drain-Gate Voltage 40 V VGS Gate-Source Voltage -40 V IGF Forward Gate Current 50 A TJ, TSTG Operating and Storage Junction Temperature Range -55 ~ +150 °C Symbol Parameter Test Condition Min. Max. Units Off Characteristics V(BR)GSS Gate-Source Breakdwon Voltage I C = -1.0µA, VDS = 0 -40 V IGSS Gate Reverse Current V GS = -15V, VDS = 0 VGS = -15V, VDS = 0, TA = 125°C -1.0 -0.2 nA µA VGS(off) Gate-Source Cutoff Voltage V DS = 15V, ID = 1.0nA -0.7 -1.6 V VGS(f) Gate-Source Forward Voltage I G = 1.0mA, VDS = 0 1.0 On Characteristics I DSS Zero-Gate Voltage Drain Current * V DS = 15V, VGS = 0 4.0 20 nA Small Signal Characteristics g fs Forward Transfer Conductance V DS = 15V, VGS = 0, f = 1.0KHz 11,000 µmhous goss Output Conductance V DS = 15V, ID = 500µA, f = 1.0KHz 25 µmhous Ciss Input Capacitace V DG = 15V, VGS = 0, f = 1.0MHz 16 pF Crss Reverse Transfer Capacitance V DG = 15V, VGS = 0, f = 1.0MHz 6 pF Symbol Parameter Max. Units PD Total Device Dissipation Derate above 25°C 625 5.0 mW mW/°C RθJC Thermal Resistance, Junction to Case 125 °C/W RθJA Thermal Resistance, Junction to Ambient 357 °C/W PF5102 N-Channel Switch This device is designed for low level analog switching, sample and hold circuits and chopper stabized amplifiers. Sourced from process 51. See J111 for characteristics. 1. Drain 2. Source 3. Gate
Rev. A, January 2003 0.46 ±0.10 1.27TYP (R2.29) 3.86MAX [1.27 ±0.20] 1.27TYP [1.27 ±0.20] 3.60 ±0.20 14.47 ±0.40 1.02 ±0.10 (0.25) 4.58 ±0.20 4.58+0.25 –0.15 0.38+0.10 –0.05 0.38+0.10 –0.05 TO-92 ©2003 Fairchild Semiconductor Corporation
©2003 Fairchild Semiconductor Corporation Rev. I2 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. FACT™ FACT Quiet series™ FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I 2C™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TruTranslation™ UHC™ UltraFET® VCX™ ACEx™ ActiveArray™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E 2CMOS™ EnSigna™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™