PF CRYDOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- SIP SSR
- Ratings to 25A (forced air) @ 480 VAC
- SCR output for heavy industrial loads
- AC or DC control
- Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 25A 25A 25A 3-15 VDC PF240D25 4-15 VDC PF380D25 PFE480D25 15-32 VDC PFE240D25 PFE380D25 PF480D25 18-36 VAC PFE240A25 90-140 VAC PF240A25 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 12-280 48-530 48-660 Transient Overvoltage [Vpk] 600 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 Maximum Load Current Arms Forced Air 25 Convection Air 10 Forced Air 25 Convection Air 10 Forced Air 25 Convection Air 10 Minimum Load Current [Arms] 0.06 0.06 0.06 Maximum Surge Current (16.6ms) [Apk] 250 250 250 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 Maximum I²t for fusing (8.3 msec) [A² sec] 260 260 260 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
INPUT SPECIFICATIONS (1) Description PF240D25 PF380D/480D PFExxxD25 PF240A25 PFE240A25 Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC Typical Input Current @ Nominal Voltage 15 mAdc 15 mAdc 15 mAdc 10 mAdc 10 mAdc Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1 k Ohm 2.1 k Ohm Maximum Turn-On Time [msec] (4) 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10 Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 VDC) 10 9 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -30 to 80˚C Ambient Storage Temperature Range -30 to 125˚C Weight (typical) 0.85 oz. (25g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwi se specified. 2) Off-State dv/dt test method per EI A/NARM standard RS-443,13.11.1 3) Heatsink temperature 85 ûC Maximum. 4) Turn-On Time for Random Turn-On versions 0.1 m sec (DC Control Models) MECHANICAL SPECIFICATIONS DC CONTROL. PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL AC CONTROL. PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL UL E116950 CSA LR70938(DC Control Only) Rev. 061608 THERMAL DERATE INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
CSA LR70938(DC Control Only) Rev. 0061608 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
ANNEX - ENVIROMENTAL INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.