DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com PF2200 Series
- TO-220 Housing
- Rated Power to 50 Watts
- Resistances from 0.01 to 51K Ohms
- High Stability Film Resistance Elements
- Resistance Tolerance to ±0.05%
- Low Inductance ( <50nH )
- Isolated Mounting Tab SPECIFICATIONS
1 Power rating based on 25°C Flange Temperature
2 Power rating based on 25°C Ambient Temperature
3 Consult Factory for Higher or Lower Values
50W 1W 2.3°C/W 0.01W 220W ±1% ( R≥0.1 W ) ±5% ±50ppm/°C ( R≥10 W ) ±250ppm/°C ( R < 0.1W ) 30W 1W 2.3°C/W 220W 51KW ±1%, ±5% ±50ppm/°C PF2203 35W 1W 3.3°C/W 0.01W 220W ±1% ( R≥0.1 W ) ±5% ±50ppm/°C ( R≥10 W ) ±250ppm/°C ( R < 0.1W ) 20W 1W 3.3°C/W 220W 51KW ±1%, ±5% ±50ppm/°C PF2202 20W 1W 5.9°C/W 0.01W 220W ±1% ( R≥0.1 W ) ±5% ±50ppm/°C ( R≥10 W ) ±250ppm/°C ( R < 0.1W ) 10W 1W 5.9°C/W 220W 51KW ±1%, ±5% ±50ppm/°C PF2201 10W 0.5W 3.3°C/W 0.1W 51KW ±0.5% ( R≥1 W ) ±1% ±5 ( R≥1 W ) ±25ppm/°C ( R< 1W ) TO-220 Power Film Resistors Part Number - Resistance - Tolerance - TCR Example: PF2203 0.5 Ohm 1% 100ppm
Ordering Information
Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com SPECIFICATIONS (continued) Specification Value Maximum Current 25A Temperature Range -55°C to +155°C : PF2202, PF2203, PF2205 -55°C to +120°C : PF2201 Dielectric Strength 2000 VAC Max. Operating Voltage 500 V Insulation Resistance >1000 Meg-Ohm Environmental Performance DR Test Conditions Load Life ±1% + 0.05W 25°C, 90 min ON, 30 min OFF, 1000 hr Humidity Resistance ±1% + 0.05W 40°C, 90-95% RH, DC 0.1W, 1000 hr Temperature Cycle ±0.25% + 0.05W -55°C for 30 min, +155°C for 30 min, 1000 hr Solder Heat ±0.1% + 0.05W +350°C, 3s Vibration ±0.25% + 0.05W IEC60068-2-6 Power Rating Notes - The PF2200 Series Foil Resistors must be attached to a suitable heatsink. The maximum internal resistor temperature is 155°C (120°C for the PF2201). To specify an appropriate heatsink use the following formula : RqH = TMAX - ( P x RqR ) - TA P Where: RqH = Thermal Resistance of Heatsink ( °C/W ) RqR = Thermal Resistance of Resistor ( °C/W ) TMAX = Maximum Temperature of Resistor TA = Ambient Temperature of Heatsink ( °C ) P = Power Through Resistor ( W ) -25 0 25 50 75 100 125 150 175 100 120 Power ( % ) Ambient Temperature (°C) PF2201 PF2205, PF2203, PF2202 Power Derating Curve Mounting Notes - The PF2200 Series Film Resistors must be attached to a suit- able heatsink. Mount resistor using thermal grease to a clean, flat surface. Use a compression washer to provide 150 to 300 pounds ( 665 to 1330N ) of mounting force. Torque mounting screw to 8 in-lbs ( 0.9 N-m ). Mounting tab is isolated from both pins. PF2200 Series TO-220 Power Film Resistors