PETL-6-BK100C MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Features
- High expansion
- Reduces inventory
- Easy installation over wire bundles
- Ideal for large termination or cable transitions
- High abrasion and good chemical resistance
- Available in black
- Self extinguishing due to its braided construction
- Supplied on coils
- Expandable braided sleeving is made of polyester monofilaments. Its specially designed construction provides a high expansion ratio of 1:3 which enables a very easy and quick fitting over bundles of cables. Due to it’s high expansion, only few references are necessary, which allow you to cover a wide range of diameters
- With a continuous working temperature of -50°C to +150°C and a resistance to most chemicals, it can be used in hostile conditions and is suitable for all industrial processes Specifications Monofilament : Polyester - size 0.22 mm Melting Point : +250°C Limiting Oxygen Index : 33% (CEI 684-2) Working Temperature : -50°C to +150°C Withstand Peaks : 220°C Flame Resistance : Passes flame resistant requirements of CEI 332-1 and FMVSS 302 (Type A) I2 according to NF F16-101 Fume Toxicity : Passes CEI 754-1 and CEI 754-2 Halogen free Fumes Opacity : Passes NF C 20452 (polymer) Chemical Resistance : Unaffected by most chemicals Specification Table Nominal Diameter Range of Use Advise Coil Length (m) Number of Yarns Weight Gr / m Part Number Minimum Maximum 6 4 12 100 48 2.8 PETL-6-BK 100C 12 7 21 100 144 8 PETL-12-BK100C 20 10 30 100 216 12 PETL-20-BK100C 30 20 60 50 288 16.5 PETL-30-BK50C Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.