PESD12VL1BA | DigiCamel IC Datasheet

Online Datasheet

Read PESD12VL1BA online.

PESDXL1BA PHILIPS | Alldatasheet

Document overview

Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 15

Technical content

Product proﬁle

1.1 General description

Bidirectional ElectroStatic Discharge (ESD) protection diodes in a very small SOD323 (SC-76) SMD plastic package designed to protect one signal line from the damage caused by ESD and other transients.

1.2 Features

1.3 Applications

1.4 Quick reference data

Low capacitance bidirectional ESD protection diodes in SOD323 Rev. 01 — 4 October 2004 Product data sheet ■ Bidirectional ESD protection of one line■ ESD protection > 23 kV ■ Max. peak pulse power: Ppp = 500 W ■ IEC 61000-4-2, level 4 (ESD) ■ Low clamping voltage: V(CL)R = 26 V ■ IEC 61000-4-5 (surge); Ipp = 18 A ■ Ultra low leakage current: IRM < 0.09µA ■ Very small SMD plastic package. ■ Computers and peripherals ■ Data lines ■ Communication systems ■ CAN bus protection. ■ Audio and video equipment Table 1: Quick reference data Symbol Parameter Conditions Min Typ Max Unit VRWM reverse stand-off voltage PESD3V3L1BA - - 3.3 V PESD5V0L1BA - - 5.0 V PESD12VL1BA - - 12 V PESD15VL1BA - - 15 V PESD24VL1BA - - 24 V C d diode capacitance V R = 0 V; f=1M H z PESD3V3L1BA - 101 - pF PESD5V0L1BA - 75 - pF PESD12VL1BA - 19 - pF PESD15VL1BA - 16 - pF PESD24VL1BA - 11 - pF

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 2 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 2. Pinning information 3. Ordering information 4. Marking Table 2: Pinning Pin Description Simpliﬁed outline Symbol 1 cathode 1 2 cathode 2 sym045 Table 3: Ordering information Type number Package Name Description Version PESDxL1BA series SC-76 plastic surface mounted package; 2 leads SOD323 Table 4: Marking codes Type number Marking code PESD3V3L1BA AB PESD5V0L1BA AC PESD12VL1BA AD PESD15VL1BA AE PESD24VL1BA AF

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 3 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 5. Limiting values [1] Non-repetitive current pulse 8/20µs exponential decay waveform; seeFigure1. [1] Device stressed with ten non-repetitive ESD pulses; seeFigure2. Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit Ppp peak pulse power 8/20 µs [1] PESD3V3L1BA - 500 W PESD5V0L1BA - 500 W PESD12VL1BA - 200 W PESD15VL1BA - 200 W PESD24VL1BA - 200 W I pp peak pulse current 8/20 µs [1] PESD3V3L1BA - 18 A PESD5V0L1BA - 15 A PESD12VL1BA - 5 A PESD15VL1BA - 5 A PESD24VL1BA - 3 A T j junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C Table 6: ESD maximum ratings Symbol Parameter Conditions Min Max Unit ESD electrostatic discharge capability IEC 61000-4-2 (contact discharge) [1] PESD3V3L1BA - 30 kV PESD5V0L1BA - 30 kV PESD12VL1BA - 30 kV PESD15VL1BA - 30 kV PESD24VL1BA - 23 kV PESDxL1BA series HBM MIL-Std 883 - 10 kV Table 7: ESD standards compliance Standard Conditions IEC 61000-4-2; level 4 (ESD);Figure2 > 15 kV (air); > 8 kV (contact) HBM MIL-Std 883; class 3 > 4 kV

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 4 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 Fig 1. 8/20µs pulse waveform according to IEC 61000-4-5. Fig 2. ESD pulse waveform according to IEC 61000-4-2. t (µs) 04 0 3010 20 001aaa630 120 Ipp (%) e−t 100 % Ipp; 8 µs 50 % Ipp; 20 µs 001aaa631 Ipp 100 % 90 % t 30 ns 60 ns 10 % tr = 0.7 to 1 ns

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 5 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 6. Characteristics Table 8: Characteristics Tamb = 25°C unless otherwise speciﬁed. Symbol Parameter Conditions Min Typ Max Unit VRWM reverse stand-off voltage PESD3V3L1BA - - 3.3 V PESD5V0L1BA - - 5.0 V PESD12VL1BA - - 12 V PESD15VL1BA - - 15 V PESD24VL1BA - - 24 V I RM reverse leakage current seeFigure7 PESD3V3L1BA V RWM = 3.3 V - 0.09 2 µA PESD5V0L1BA V RWM = 5.0 V - 0.01 1 µA PESD12VL1BA V RWM = 12 V - < 1 50 nA PESD15VL1BA V RWM = 15 V - < 1 50 nA PESD24VL1BA V RWM = 24 V - < 1 50 nA V(BR) breakdown voltage I R = 5 mA PESD3V3L1BA 5.8 6.4 6.9 V PESD5V0L1BA 7.0 7.6 8.2 V PESD12VL1BA 14.2 15.9 16.7 V PESD15VL1BA 17.1 18.9 20.3 V PESD24VL1BA 25.4 27.8 30.3 V C d diode capacitance V R = 0 V; f = 1 MHz; see Figure5 and6 PESD3V3L1BA - 101 - pF PESD5V0L1BA - 75 - pF PESD12VL1BA - 19 - pF PESD15VL1BA - 16 - pF PESD24VL1BA - 11 - pF V (CL)R clamping voltage [1] PESD3V3L1BA I pp = 1 A - - 8 V Ipp = 18 A - - 26 V PESD5V0L1BA I pp = 1 A - - 10 V Ipp = 15 A - - 33 V PESD12VL1BA I pp = 1 A - - 20 V Ipp = 5A - - 37 V PESD15VL1BA I pp = 1 A - - 25 V Ipp = 5 A - - 44 V PESD24VL1BA I pp = 1 A - - 40 V Ipp = 3 A - - 70 V

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 6 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 [1] Non-repetitive current pulse 8/20µs exponential decay waveform; seeFigure1. rdif differential resistance IR = 1 mA PESD3V3L1BA - - 400 Ω PESD5V0L1BA - - 80 Ω PESD12VL1BA - - 200 Ω PESD15VL1BA - - 225 Ω PESD24VL1BA - - 300 Ω Table 8: Characteristics …continued Tamb = 25°C unless otherwise speciﬁed. Symbol Parameter Conditions Min Typ Max Unit

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 7 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 Tamb = 25°C. tp = 8/20µs exponential decay waveform; see Figure1. (1) PESD3V3L1BA and PESD5V0L1BA. (2) PESD12VL1BA; PESD15VL1BA; PESD24VL1BA. Fig 3. Peak pulse power dissipation as a function of pulse time; typical values. Fig 4. Relative variation of peak pulse power as a function of junction temperature; typical values. Tamb = 25°C; f = 1 MHz. (1) PESD3V3L1BA. (2) PESD5V0L1BA. T amb = 25°C; f = 1 MHz. (1) PESD12VL1BA. (2) PESD15VL1BA. (3) PESD24VL1BA. Fig 5. Diode capacitance as a function of reverse voltage; typical values. Fig 6. Diode capacitance as a function of reverse voltage; typical values. 006aaa066 103 102 104 Ppp (W) tp (µs) 11 0 410310 10 2 (1) (2) Tj (°C) 0 200 15050 100 001aaa193 0.4 0.8 1.2 P pp Ppp(25˚C) VR (V) 05 4231 006aaa067 100 110 C d (pF) (1) (2) VR (V) 02 5 2010 155 006aaa068 C d (pF) (1) (2) (3)

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 8 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 (1) PESD3V3L1BA; PESD5V0L1BA. For PESD12VL1BA, PESD15VL1BA and PESD24VL1BA, IRM < 20 nA at 150°C. Fig 7. Relative variation of reverse leakage current as a function of junction temperature; typical values. 006aaa069 10-1 Tj (°C) -100 150 10005 0-50 IRM IRM(25 °C) (1)

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 9 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 Fig 8. ESD clamping test set-up and waveforms. 006aaa070 50 Ω R Z C Z 1 DUT: PESDxL1BA vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) unclamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) vertical scale = 200 V/div horizontal scale = 50 ns/div vertical scale = 20 V/div; horizontal scale = 50 ns/div vertical scale = 20 V/div; horizontal scale = 50 ns/div GND GND 450 Ω RG 223/U 50 Ω coax ESD TESTER IEC 61000-4-2 network C Z = 150 pF; RZ = 330 Ω

4 GHz DIGITAL

10× ATTENUATOR GND GND GND GND GND GND GND GND GND GND PESD3V3L1BA PESD5V0L1BA PESD12VL1BA PESD15VL1BA PESD24VL1BA PESD3V3L1BA PESD5V0L1BA PESD12VL1BA PESD15VL1BA PESD24VL1BA

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 10 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 7. Application information The PESDxL1BA series is designed for bidirectional protection of one signal line from the damage caused by Electro Static Discharge (ESD) and surge pulses. The PESDxL1BA series may be used on lines where the signal polarity is above and below ground. The PESDxL1BA series provides a surge capability of up to 500 W per line for a 8/20µs waveform. Circuit board layout and protection device placement Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the protection device as close to the input terminal or connector as possible. 2. The path length between the protection device and the protected line should be minimized. 3. Keep parallel signal paths to a minimum. 4. Avoid running protected conductors in parallel with unprotected conductor. 5. Minimize all printed-circuit board conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. For multilayer printed-circuit boards, use ground vias. Fig 9. Typical application: Bidirectional protection of one signal line. 006aaa071 ground PESDxL1BA line to be protected

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 11 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 8. Package outline Fig 10. Package outline SOD323 (SC-76). REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOD323 SC-76 SOD323 99-09-13 03-12-17 Note 1. The marking bar indicates the cathode UNIT A mm 0.051.1 0.8 0.40 0.25 0.25 0.10 1.8 1.6 1.35 1.15 2.7 2.3 0.45 0.15 A max DIMENSIONS (mm are the original dimensions) Plastic surface mounted package; 2 leads (1) 2 mm scale bp c D E H D Q 0.25 0.15 Lp v 0.2 AD A E Lp bp detail X A 1 c Q H D vAM X

9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 12 of 15 Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 9. Packing information [1] For further information and the availability of packing methods, seeSection14. Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 3000 10000 PESDxL1BA series SOD323 4 mm pitch, 8 mm tape and reel -115 -135

Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 13 of 15 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PESDXL1BA_SER_1 20041004 Product data sheet - 9397 750 13595 -

Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 9397 750 13595 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 4 October 2004 14 of 15 11. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Deﬁnitions Short-form speciﬁcation —The data in a short-form speciﬁcation is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values deﬁnition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the speciﬁcation is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the speciﬁed use without further testing or modiﬁcation. 13. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notiﬁcation (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise speciﬁed. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales ofﬁce addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Deﬁnition I Objective data Development This data sheet contains data from the objective speciﬁcation for product development. Philips Semiconductors reserves the right to change the speciﬁcation in any manner without notice. II Preliminary data Qualiﬁcation This data sheet contains data from the preliminary speciﬁcation. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the speciﬁcation without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product speciﬁcation. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notiﬁcation (CPCN).

© Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 4 October 2004 Document number: 9397 750 13595 Published in The Netherlands Philips Semiconductors PESDxL1BA series Low capacitance bidirectional ESD protection diodes in SOD323 15. Contents

Product Information

PESD12VL1BA specifications and overview.

Summary

Low capacitance bidirectional ESD protection diodes in Rev. 01-4 October 2004

Description

Low capacitance bidirectional ESD protection diodes in Rev. 01-4 October 2004

Source title PESD12VL1BA Datasheet(PDF) - NXP Semiconductors

Related Parts

More parts from the same family.

Browse manufacturer