PESD0603-140 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 1 of 5 © 2005 Tyco Electronics Corporation. All Rights Reserved GENERAL DESCRIPTION BENEFITS

  • Board space savings
  • Help to protect sensitive electronic circui ts against electrostatic discharge (ESD) events
  • Assist equipment to pass IEC 61000-4-2, level 4 testing
  • Suitable for high speed data transmission applications
  • Longer battery life, due to low leakage current

FEATURES

  • Thick film technology
  • Low capacitance (0.25 pF typical)
  • Low leakage current
  • Low trigger voltage
  • Low clamping voltage
  • Capable of withstanding numerous ESD strikes
  • Compatible with standard reflow installation procedures

APPLICATIONS

  • Cellular phones
  • Antennas (cell phones, GPS…)
  • Portable devices (PDA, DSC, BlueTooth…)
  • Printer ports
  • High speed Ethernet
  • USB 2.0 and IEEE 1394 interfaces
  • DVI and HDMI interfaces MATERIALS INFORMATION ROHS Compliant ELV Compliant PART NUMBERING PESD 0603 -1 4 0 Series Operating Voltage Designator 14 x 100 = 14VDC EIA Size

www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 2 of 5 © 2005 Tyco Electronics Corporation. All Rights Reserved TYPICAL DEVICE RATINGS AND CHARACTERISTICS Continuous Max Operating Voltage Typical IEC Trigger Voltage1 Typical IEC Clamping Voltage1 after 30ns Typical TLP Trigger Voltage2 Typical TLP Clamping Voltage2 after 30ns Typical TLP Clamping Voltage2 after 60ns Typical Capacitance, @ 1 MHz, 1Vrms Typical Leakage Current @14VDC Max Leakage Current @14VDC Symbol V DC V T(IEC) V C(IEC) V T(TLP) V C(TLP 30) V C(TLP 60) Cp I L(Typ) I L(MAX) Unit V V V V V V pF µA µA Value 14 350 30 320 75 65 0.25 <0.001 0.01 Note 1: IEC61000-4-2, level 4, 8kV contact test method Note 2: TLP test method at 500V (refer to graph on next page) GENERAL CHARACTERISTICS Storage temperature: -40°C … +85°C Operating temperature: -40°C … + 85°C ESD voltage capability (tested per IEC 61000-4-2) - Contact discharge mode: typical 8kV, max 15kV - Air discharge mode: typical 15kV, max 25kV ESD pulse withstand: Typically 1,000 pulses (tested per IEC 61000-4-2, level 4, contact method) ENVIRONMENTAL SPECIFICATIONS Bias Humidity Test Thermal Shock Bias Heat Test Bias Low Temp Test Solderability Solder Heat Vibration Solvent Resistance Test Conditions 40ºC, 90% RH, MAX VDC, 1000 hrs -40ºC to 85ºC, 30 min dwell, 5 cycles 85ºC, MAX VDC, 1000 hrs -40ºC, MAX VDC, 1000 hrs 230ºC ± 5ºC, 3 ± 1s, 95% coverage 260ºC, 10s 1 to 2kHz, 1.5 min cycle, 2hrs each in X-Y-Z-direction IPA ultrasonic 300s Pass / Fail Criteria IL ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA I L ≤ 10 µA

www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 3 of 5 © 2005 Tyco Electronics Corporation. All Rights Reserved 0.00 50.00 100.00 150.00 200.00 250.00 300.00 350.00 400.00 450.00 500.00 Time (ns) Voltage (V) TYPICAL TRANSMISSION LINE PULSE RESPONSE GRAPH

www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 4 of 5 © 2005 Tyco Electronics Corporation. All Rights Reserved MIN MAX MIN MAX MIN MAX MIN MAX length A Height B Terminal Width C Width D DIMENSIONS Drawing Not To Scale *Rounded off approximation RECOMMENDED LAND PATTERN: Solder thickness 0.15 to 0.2mm W X Y (Ref) Z Min Max Min Max Min Max Min Max *Rounded off approximation. B X W Y Z

www.tycopowercomponents.com Document: SCD 26107 Status: Released Rev. B Date: APRIL 14, 2005 Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 94025 Tel: (800) 227-4856 Fax: (800) 227-4866 5 of 5 © 2005 Tyco Electronics Corporation. All Rights Reserved SOLDER REFLOW RECOMMENDATIONS: A Temperature ramp up 1 From ambient to Preheating temperature 30s to 60s B Preheating 140°C - 160°C 60s to 120s C Temperature ramp up 2 From Preheating to Main heating temperature 20s to 40s at 200°C 60s ~ 70s D at 220°C 50s ~ 60s at 240°C 30s ~ 40s Main heating at 260°C 5s ~ 10s E Cooling From main heating temperature to 100°C max 4°C/s Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of each product for their applications. Tyco Electronics Corporation assumes no responsibility for the use of its product or for any infringement of pate nts or other rights of third parties resulting from the use of its pr oduct. No license is granted by implication or otherwise under any patent or proprieta ry right of Tyco Electronics except the right to use such product for the purpose for which it is sold. Tyco Electronics re serves the right to change or u pdate, without notice, any information contained in this publication; to change, without notic e, the design, construction, pr ocessing, or specification of any product; and to discontinue or limit production or distribut ion of any product. This publication super sedes and replaces all information previ ously supplied. Without express written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. Tyco Electronics’ only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indi rect, or consequential damages ar ising from the sale, resale, use, or misuse of its products. Raychem is a trademark of Tyco Electronics Corporation