PESD0402E UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
Description
Applications
Revision March 1,2022 www.unsemi.com.tw www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/6 The best ESD protection for high speed, low voltage applications RoHS compliant and halogen free Compact size for EIA 0402 Ultra low capacitance, 0.05 pF (typ.) Extremely quick response time (<1ns) Extremely low leakage current Bi-directional, single line protection Functional Diagram Smart Phone/Mobile Internet Device Laptop/Desktop Computer Bi-directional, single line protection Antennas (Cell Phones, GPS…) High Speed Ethernet USB 3.0 and USB 3.1 Caution: This component is designed for signal line protection only, not intended to be used on power lines or for power bus applications. Surface Mount Polymeric ESD Suppressor Type PESD0402EXXV Package 0402 Size (mm) 1.00x0.52x0.38 Delivery Form 7” T&R Delivery Quantity 10,000 1 2
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Electrical Characteristics @ 25℃ Unless Otherwise Specified ) General Technical Data Environmental Part Numbering Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/6 PESD0402E Series Surface Mount Polymeric ESD Suppressor PESD0402E03V PESD0402E05V PESD0402E07V PESD0402E08V PESD0402E10V PESD0402E12V PESD0402E14V PESD0402E15V PESD0402E18V PESD0402E24V 3.0 5.0 7.0 8.0 10.0 12.0 14.0 15.0 18.0 24.0 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 450 450 450 450 450 450 450 450 450 450 Operating Temperature Storage Temperature (on board) Response Time Solderabity Solder Leach Resistance -40 ~ +85℃ -55 ~+125℃ <1ns 245 ± 5℃, 3 ±1sec. 260 ± 5℃, 10 ± 1sec. Contact Discharge Voltage: 8 KV Air Gap Discharge Voltage: 15 KV Notes:Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method. Part Number Working Voltage VDC Capacitance @10MHz Cp Leakage Current @VDC IL Clamping Voltage VC Trigger Voltage Vt Maximum ESD IEC61000-4-2 ESD Pulse Withstand IEC61000-4-2 8KV contact dischargeµApFV Item Bias Humidity Thermal Shock Preconditioning Product Series EIA Size Operating Voltage Designator Product Version Specifications Test Condition 85%RH, 85℃, Working Voltage, 1000 hrs -55℃ to 125℃, 30 min. cycle, 1000 cycles 125℃, 24H; 85℃, 85%RH, 162H; 260℃ Reflow,3 Times IL ⛄ 100 nA PESD 0402 E 05V
Revision March 1,2022 www.unsemi.com.tw Surface Mount Polymeric ESD Suppressor ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/6 Eye Diagram Measuremen ESD Protection for Signal Line PESD0402E Series The PESD is designed for the protection of one bidirectional data line from ESD damage. Place the PESD as close to the input terminal or connector as possible. Minimize the path length between the PESD and the protected signal line. Use ground planes whenever possible. USB3.0 Mask at 5.0 GbpsHDMI Mask at 3.4 Gbps
Revision March 1,2022 www.unsemi.com.tw Surface Mount Polymeric ESD Suppressor ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/6 Package Dimension PESD0402E Series Notesğ This solder pad layout is for reference purposes only. *Sizes in mm Recommended Solder Pad Footprint Model L(mm) W(mm) H(mm) P(mm) 0.90 0.42 0.25 0.15 1.00 0.52 0.38 0.25 1.10 0.62 0.45 0.35 Unit: Millimeters Min Typ. Max.
Revision March 1,2022 www.unsemi.com.tw Surface Mount Polymeric ESD Suppressor ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/6 Taping Specification Unit: mm PESD0402E Series A 178.0 ± 2.0 N Min C 13.0 ± 0.2 W2 Max. 14.4 W1 Min. W1 Max. 8.4 9.9
Temperature Min (Tsmin) Temperature Max (Tsmax) Time (tS) from (Tsmin to Tsmax) Ramp-up Rate (TL to TP) Liquidus temperature (TL) Time (tL) maintained above TL Peak package body temperature (Tp) Time 25 °C to peak temperature Ramp-down Rate (TP to TL) Time (tP)* within 5 °C of the specified classification temperature (TC) 150 °C 200 °C 60-120 seconds 3 °C/second max. 217 °C 60-150 seconds 260(+0/-5)°C 30* seconds 6 °C/second max. 8 minutes max. * Tolerance for peak profile temperature (TP) is defined as a supplier minimum and a user maximum. Pre Heat Pb-Free Assembly Revision March 1,2022 www.unsemi.com.tw Surface Mount Polymeric ESD Suppressor ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.6/6 Soldering Parameters FIG.5: Reflow condition PESD0402E Series Temperature TS(min) TS(max) TL TP tp tL time to peak temperatue Time (t 25℃ to peak) Ramp-up Ramp-down Preheat Critical Zone TL to TP ts
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.