UG-054 AD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
UG-054 Evaluation Board User Guide Rev. 0 | Page 2 of 8 TABLE OF CONTENTS
REVISION HISTORY
1/10—Revision 0: Initial Version
matic startup), the regulator powers up. Figure 12. Ground Current vs. Input Voltage (VIN) at VOUT = 3.3 V, TA = 25°C
UG-054 Evaluation Board User Guide Rev. 0 | Page 8 of 8 Evaluation boards are only intend ed for device evaluation and not for production purposes. Evaluation boards are supplied “as i s” and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpos e. No license is granted by implication or otherwise under any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Device s for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the right to change devices or specifications at any time without no tice. Trademarks and registered trademarks are the property of their respective owners. Evaluation boards are not authorized to be used in life support devices or systems. ©2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the prop erty of their respective owners. UG08518-0-1/10(0)
ORDERING INFORMATION
Table 2. Reference Designator Description Manufacturer Part No. C2, C4 Capacitor, MLCC, 1 μF, 16 V, 0603, X5R Murata (or equivalent) GRM188R61C105KA93 J1 Jumper, single, STR, two pins Sullins Connector Solutions PEC02SAAN U1 IC, LDO regulator Analog Devices, Inc. ADP150ACBZ-3.3-R7 (WLCSP) ADP150AUJZ-3.3-R7 (TSOT) ESD CAUTION