PE-53112NL_V02 PULSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

P596.F (02/16)1 pulseelectronics.com Inductors Designed for National’s 50 kHz Simple Switcher™ Power Beads - PA3790.XXXHL Series Pulse Jack E l e c t r o n i c s NOTES: 1. Typical inductance occurs at the Idc and ETop values shown. 2. The control value of inductance is measured at Bop equal to or less than 10 gauss without DC current. 3. Inductance decreases with higher values of DC current and increases with lower values of DC current. 4. Inductance increases with increase in Bop or ETop. 5. SIMPLE SWITCHER™ is a trademark of National Semiconductor Corporation. Electrical Specifications @ 25°C— Operating Temperature -40° to +130° C Designed for use with National’s device numbers LM2574/LM2575/LM2576 Base material meets flammability requirements of UL 94V-0 Performance verified by National Semiconductor Part Identification Reference Operating Values 1 Design Control Values Part Number Inductor Code Inductance Typical (µH) Idc (Amps) ETop (V-µSec) Inductance No DC 2 (µH ± 20%) DCR (Ω MAX) Package Style Lead Diameter PE-53112NL L47 47 3.0 90 38 0.05 KM-2.0 .025 PE-92114KNL L68 36 5.0 90 56 0.02 KM-4.0 .040 PE-92108KNL L100 100 3.0 90 91 0.04 KM-4.0 .032 PE-53113NL L150 150 2.0 90 130 0.10 KM-4.0 .025 PE-52626NL L220 220 1.4 90 230 0.38 Low Profile .025 SQ. PE-53145NL L220 220 1.4 90 176 0.14 KM-3.0 .020 PE-52627NL L330 330 0.9 90 302 0.74 Low Profile .025 SQ. PE-53146NL L330 330 0.9 90 267 0.18 KM-3.0 .020 PE-53114NL L470 470 0.64 90 426 0.16 KM-4.0 .025 PE-52629NL L680 680 .85 90 657 1.25 Low Profile .025 SQ. PE-53115NL H150 150 3.0 200 136 0.10 KM-4.0 .025 PE-53116NL H220 220 3.0 200 167 0.07 KM-5.0 .032 PE-53117NL H330 330 3.0 200 292 0.15 KM-5.0 .025 PE-53118NL H470 470 2.0 200 369 0.17 KM-5.0 .025 PE-53119NL H680 680 1.3 200 562 0.20 KM-5.0 .025 PE-53120NL H1000 1000 0.95 200 762 0.24 KM-5.0 .025 PE-53121NL H1500 1500 0.62 200 1150 1.00 Case .032 PE-53122NL H220 2200 0.42 200 1886 1.80 Case .032

P596.F (02/16)2 pulseelectronics.com Inductors Designed for National’s 50 kHz Simple Switcher™ Power Beads - PA3790.XXXHL Series Pulse Jack E l e c t r o n i c s Low Profile Series Case Series KlipMount Series Mechanicals Schematics .460 MAX11,68 .150 ±.020 3,81 0,51 .600 ±.010 15,24 0,25 .710 MAX18,03 .400 ±.010 10,16 0,25 .710 MAX18,03 INDEX MARK PE-XXXXXNL DATE CODE COUNTRY OF ORIGIN .600 15,24 .400 10,16 .070 1,78 .045 1,14 SUGGESTED PAD LAYOUT .600 15,24 .800 MAX20,32 .900 22,86

1.44 MAX36,57

.020 5,08

1.44 MAX

36,57 .900 22,86 .600 15,24 .095 2,41 .055 1,40 SUGGESTED PAD LAYOUT No Internal Connections NL For More Information Pulse Worldwide Headquarters

12220 World Trade Drive

San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 49 7032 7806 0 Fax: 49 7032 7806 135 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzhen, PR China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 2704/2705 Super Ocean Finance Ctr.

2067 Yan An Road West

Tel: 86 21 62787060 Fax: 86 2162786973 Pulse South Asia

135 Joo Seng Road

#03-02 PM Industrial Bldg. Singapore 368363 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2016. Pulse Electronics, Inc. All rights reserved. PAD DIA. HOLE DIA. NL PKG A B C D E 11,43 16,51 17,78 8,26 3,81 11,43 21,08 24,13 10,54 3,81 15,50 24,64 27,94 12,07 5,72 17,78 33,02 35,56 15,88 6,35 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 LEAD DIA. HOLE DIA. PAD DIA. .025 .035 .060 .025 SQ. .048 .074 .032 .045 .070 .040 .056 .080