PE85N1000 PASTERNACK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • 10 KHz to 2000 MHz Bandwidth
  • Calibrated Frequencies: 10
  • 100
  • 1000
  • 2000 MHz
  • ENR output: 15 dB min
  • Typical Flatness +/- 1.5 dB
  • Excellent Stability
  • Noise Output Temperature Variation: <0.01 dB/°C
  • Noise Output Variation <0.1 dB/%V
  • Rugged Package Design supports output Female SMA connector
  • Designed to meet MIL-STD-202F environmental test conditions

Applications

  • Noise Figure Measurements
  • Built-In Test equipment for signal strenth calibrators and radar
  • Automatic Test Equipment (ATE)
  • Jamming
  • Baseband Signal Simulation
  • Additive White Gausian Noise (AWGN) source for Error Rate Measurements
  • Increase dynamic range of A/D Converters
  • SATCOM for bit error rate (BER) and noise figure
  • Can be used as a Jitter source.

Description

The PE85N1000 is a coaxial packaged Noise Source module which operates over a wide frequency range from 10 KHz to 2 GHz. The design is calibrated for 10, 100, 1000, and 2000 MHz frequencies and is ideal for Noise Figure measurements and a variety of built-in test applications. This model operates at +28 Vdc and features an ENR level of 15 dB min, typical flatness across the entire frequency band is +/- 0.5 dB, and excellent stability. Performance is specified over -55°C to +85°C with Noise Output Temperature Variation <0.01 dB/°C, Noise Output Variation <0.1 dB/%V. The rugged package design supports an output Female SMA connector with an EMI/RFI filter voltage pin and ground tab. Additionally, the model is designed to meet a variety of demanding MIL-STD-202F environmental test conditions including Humidity, Thermal Shock, and Vibration for added confidence for highly reliable operation. Electrical Specifications RF Characteristics Description Minimum Typical Maximum Units Frequency Range 10KHz 2 GHz Impedance 50 Ohms Output ENR 15 dB Flatness ±1.5 dB VSWR 1.25:1 Output Variation vs Input Voltage 0.1 dB/%V Output Variation vs Temperature 0.01 dB/deg C Bias Voltage 1 28 Volts Input Current 1 20 mA Calibration Points 10, 100, 1000, and 2000 MHz Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 PE85N1000 REV 1.1 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz Noise Generators Technical Data Sheet PE85N1000

Length 1.25 in [31.75 mm] Width/Dia. 0.75 in [19.05 mm] Height 0.5 in [12.7 mm] Weight 0.06 lbs [27.22 g] Package Type Connectorized Module Connectors DC Connector Pin Output Connector SMA Female Environmental Specifications Temperature Operating Range -55 to +85 deg C Storage Range -65 to +125 deg C Environment Humidity MIL-STD-202F, Method 103, Cond B (96 hrs@95% R.H.) Shock MIL-STD-202F, Method 213, Cond B (100g, 6 msec) Vibration MIL-STD-202F,Method 204,Cond B(0.6” 2x ampl or15g) Altitude MIL-STD-202F, Method 105, Condition B (50,000 ft) Temperature Cycle MIL-STD-202F, Method 105C, Condition D (5 cycles) Thermal Shock MIL-STD-202F, Method 107, Conditon A (5 cycles) ESD Sensitivity ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in ESD Workstation. Compliance Certifications (visit www.Pasternack.com for current document) Not RoHS Compliant REACH Compliant 12/17/2015 Plotted and Other Data Notes: PE85N1000 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 Noise Generators Technical Data Sheet PE85N1000 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz

200 400 600 800 1,000 1,200 1,400 1,600 1,800 2,000 dB Freq.(MHz) ENR dB Freq.(MHz) ENR PE85N1000 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 Noise Generators Technical Data Sheet PE85N1000 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz

PE85N1000 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 Noise Generators Technical Data Sheet PE85N1000 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz 1.0 1.0 1.0 1.1 1.1 1.1 200 400 600 800 1000 1200 1400 1600 1800 2000 Freq.(MHz) VSWR VSWR On VSWR Off 1.0 1.0 1.0 1.1 1.1 1.1 Freq.(MHz) VSWR VSWR On VSWR Off SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry.

PE85N1000 REV 1.1 Noise Generators Technical Data Sheet PE85N1000 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 URL: http://www.pasternack.com/sma-calibrated-noise-source-enr-15-db-2-ghz-pe85n1000-p.aspx

6PE85N1000 REV 1.1 SMA Calibrated Noise Source Module, Output ENR of 15 dB, +28 VDC, 0.01 MHz to 2 GHz PE85N1000 CAD Drawing