DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Functional from DC to 8.5 GHz See PE5CK1001 for full standard kit which includes (8) 3.5mm short-open-load-thru (SOL T) components Suitable for many 50 Ohm network analyzers including, but not limited to: Agilent / HP (8711/8712, 8713/8714, 8753, E5061A, E5062A, E5061B, E5071C, E5072A) Anritsu / Advantest (MS2028S, MS2026S, MS2025S, MS2024S, MS2038C, MS2036C, MS2035B, MS2034B, MS4640B, R3755A, R3760) Copper Mountain (5048, 804, 304, 818, 814) Deviser (NA7300A, NA7100A) EI41(A V3656A) OuFu (OF7631A, OF7633A) PNA (PNA3766, PNA3767) Rohde & Schwarz (ZVL, ZVC, ZVB) T ianda (TD3616C, TD3617E, TD3618C, TD3619C)

Applications

  • VNA, Full 2-Port CAL VNA, Thru CAL VNA, Substitution CAL Method
  • T est & Measurement Lab Equipment Accessories Engineering Test and Evaluation
  • General Purpose Test and Evaluation Configuration Connector 3.5mm Male Component Type Thru Impedance 50 Ohms Frequency Range DC to 8.5 GHz Description Minimum Typical Maximum Units Frequency Range MHz Impedance Ohm Insertion Loss, DC - 8500 MHz 0.05 0.2 dB Return Loss, DC - 8500 MHz 30 35 dB Item Units Housing Connector Connector Screw Thread Inch Dimensions Inch [mm] Net Weight g Stainless Steel 50 Ohm 3.5mm Male (Both Ends) 1/4"-36 UNS 5.5

Description

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 PE5SC3004 PE5SC3004 REV 1.0 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz

# Notes 1 Keep provided protective blue caps installed when not in use. 2 Store in climate controlled environment. 3 Always keep connectors clean. 4 Avoid touching the connector interface. 5 Use caution when handling. 6 For female components, do not insert male pin greater than 0.037" [.94 mm]. Failure to comply will result in damage to the female connector.

7 When mating, always ensure that the components to be interconnected remain in a fixed

position while rotating only the coupling nut slowly to mate the connectors.

8 When de-mating, always ensure that the interconnected components remain in a fixed

position while rotating only the coupling nut slowly to de-mate the connectors. Visually inspect the connector threads prior to use. If needed, clean the center conductor pin and outer conductor with alcohol to remove any debris that may be present. Be sure to apply the alcohol in a circular motion with a lint-free cloth or applicator. 10 Use at room temperature. Torque wrench provided is intended for 3.5mm connector types and is calibrated to 8 in-lbs. General Instructions and Usage Notes PE5SC3004 PE5SC3004 REV 1.0 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz

Span: 8500 MHz PE5SC3004 PE5SC3004 REV 1.0 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz

PE5SC3004 REV 1.0 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 PE5SC3004 Return Loss Span: 8500 MHz Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant REACH Compliant 06/16/2014 Plotted and Other Data Notes:

  • Values at +25 °C, sea level 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz

PE5SC3004 REV 1.0 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz

6© 2014 Pasternack Enterprises All Rights Reserved PE5SC3004 REV 1.0 3.5mm Male General Purpose Calibration Kit Component Thru Operating From DC to 8.5 GHz PE5SC3004 CAD Drawing