DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
N Male Connector Clamp/Solder Attachment For RG14, RG217 Configuration Connector N Male Connector Specification MIL-STD-348A Connector Interface Type RG14,RG217 Cable Attachment Method (Shield/Contact) Clamp/Solder Body Style Straight Electrical Specifications Frequency Range, GHz DC to 1 1 Impedance, Ohms 50 Maximum Operating Voltage, Volts 1,000 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] 1.63 [41.4] Width/Dia., in [mm] 0.8 [20.32] Weight, lbs [g] 0.151 [68.49] Connector Type N Male Contact Material and Plating Brass, Gold Contact Plating Specification 30µ in. minimum Coupling Nut Material and Plating Brass, Nickel Coupling Nut Plating Specification 100µ in. minimum Body Material and Plating Brass, Nickel Body Plating Specification 100µ in. minimum Dielectric Type T eflon Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Y es Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment For RG14, RG217 PE4221 PE4221 PE4221 REV 1 N Male Connector Clamp/Solder Attachment For RG14, RG217
Notes: V alues at 25 °C, sea level N Male Connector Clamp/Solder Attachment For RG14, RG217 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment For RG14, RG217 PE4221 URL: http://www.pasternack.com/n-male-standard-rg14-rg217-connector-pe4221-p.aspx N Male Connector Clamp/Solder Attachment For RG14, RG217 PE4221 PE4221 REV 1
© 2013 Pasternack Enterprises All Rights Reserved 3PE4221 REV 1 DWG TITLE PE4221 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 1. SLIDE CLAMP NUT (1) & GASKET (2) OVER CABLE. STRIP CABLE AS SHOWN. DO NOT NICK BRAID WHILE CUTTING JACKET. TAPER END OF BRAID TO PERMIT ASSEMBLY OF BRAID CLAMP (3) SLIDE BRAID CLAMP(3) OVER BRAID & SEAT AGAINST CABLE. 2. FORM BRAID OVER CLAMP NUT (3). TRIM BRAID BACK TO SHOULDER. CUT DIELECTRIC TO DIMENSION SHOWN. DO NOT NICK CENTER CONDUCTOR. SOLDER CONTACT TO CENTER CONDUCTOR. REMOVE EXCESS SOLDER. DO NOT OVER HEAT DIELECTRIC. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. ASSEMBLY PROCEDURES FSCM NO. 53919 CAD FILE 050113 SCALE N/A SIZE A 2233 N Male Connector Clamp/Solder Attachment For RG14, RG217 PE4221 CAD Drawing