DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
User Guide EVAL-ADN4620/EVAL-ADN4621 TABLE OF CONTENTS analog.com Rev. 0 | 2 of 9
REVISION HISTORY
6/2022—Revision 0: Initial Version
Table 1. Jumper Configuration for EVAL-ADN4620EBZ and EVAL-ADN4621EBZ P1 1 and 2 Side 1 refresh disabled (quiet operation): REFRESH1 shorted to VDD1. 2 and 3 Side 1 refresh enabled (normal operation): REFRESH1 shorted to GND1. P2 1 and 2 Side 2 refresh disabled (quiet operation): REFRESH2 shorted to VDD2. 2 and 3 Side 2 refresh enabled (normal operation): REFRESH2 shorted to GND2. Table 2. Power Supply Connector Descriptions for EVAL-ADN4620EBZ and EVAL-ADN4621EBZ Table 3. Input and Output Connector Descriptions for EVAL-ADN4620EBZ Table 4. Input and Output Connector Descriptions for EVAL-ADN4621EBZ
Figure 9. EVAL-ADN4620EBZ or EVAL-ADN4621EBZ Solder Side
User Guide EVAL-ADN4620/EVAL-ADN4621
ORDERING INFORMATION
analog.com Rev. 0 | 8 of 9 BILL OF MATERIALS Table 5. EVAL-ADN4620EBZ Bill of Materials
3 C2, C4, C14 Capacitors, 100 pF, 0402 Murata GRM1555C1H101JA01D
8 C3, C6, C7, C10, C12, C13, C18,
1 C17 Capacitor, 0603 Not fitted Not applicable
1 J1 Connector, SMA, edge Not fitted Not applicable
11 J3 to J6, J11 to J14, J17 to J19Connectors, SMA, edge Johnson - Cinch 142-0701-851
2 J21, J22 Connectors, SMA Pasternack
2 P1, P2 3-pin, header (and jumper) Molex (and Sullins)22-23-2031 (and QPC02SXGN-RC)
2 R1, R3 Resistors, 100 Ω, 0201 Panasonic ERJ-1GNF1000C
1 R2 Resistor, 0201 Not fitted Not applicable
9 TP1 to TP9 Test points Components
1 TP10 Test point Not fitted Not applicable
2.5 Gigabit isolator
User Guide EVAL-ADN4620/EVAL-ADN4621 ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887-2356, U.S.A. Rev. 0 | 9 of 9 Table 6. EVAL-ADN4621EBZ Bill of Materials