DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Max Frequency 4 GHz 69.5% Phase V elocity Double Shielded Lot T raceability J-STD-Soldering Qualified (QPL) cable and connectors RF T est Plots T est Report In stock and ready to ship
Applications
- Hi-Rel MIL-DTL-17 Requirements
- A vionics IFF
- SA TCOM ECM
Description
Pasternack’s MIL-DTL-17 cable assemblies are part of our full line of reliable RF components available for same-day ship - ping. These commercial-off-the-shelf (COTS), military grade cable assemblies are designed and processed with high reli - ability in mind. MIL-PRF-39012 connectors and MIL-C-17 coaxial cable are assembled using J-STD soldering processes and WHMA-A-620 workmanship criteria. The combination of materials, processing and acceptance testing work together to create a dependable cable assembly for applications where performance over time is important or the cost of failure is high. Each finished MIL-DTL-17 cable assembly is traceable to its component lots and a test report is available for every lot produced. Our MIL-DTL-17 cable assembly datasheet specifications and drawing with dimensions are shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave cable assemblies allow designers to configure and cus- tomize their signal connections however they like. Whether the need is to provide reliable mil-spec connections or fielding dependable RF cable assemblies, Pasternack has the right cable assemblies for the job. Pasternack can also expertly build your custom cable assemblies for you and ship same day. Referenced Specifications IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies MIL-DTL-17 Cables, Radio Frequency , Flexible and Semirigid, General Specification for MIL-STD-348 Radio Frequency Connector Interfaces for MIL-DTL-3643, MIL-DTL-3650, MIL-DTL-3655, MIL- DTL-25516, MIL-PRF-31031, MIL-PRF-39012, MIL-PRF-49142, MIL-PRF... MIL-PRF-39012 Connectors, Coaxial, Radio Frequency , General Specification for IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies IPC J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications SAE AS5942 Marking of Electrical Insulating Materials SAE AS23053 Insulation Sleeving, Electrical, Heat Shrinkable, General Specifications For SAE AS22520 Crimping Tools, Wire Termination, General Specification For Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 PE3M0060 REV 1.1 MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax RF Cable Assemblies Technical Data Sheet PE3M0060
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation. Material Specifications Component Specification Cable M17/128-RG400 in accordance with MIL-DTL-17 Connector 1 M39012/16-0014 in accordance with MIL-PRF-39012 Connector 2 M39012/03-0503 in accordance with MIL-PRF-39012 Heat Shrink 1 M23053/5-106-0 in accordance with SAE AS23053 Heat Shrink 2 M23053/5-106-0 in accordance with SAE AS23053 Solder SN63 in accordance with J-STD-006 Electrical Specifications Description Minimum T ypical Maximum Units Frequency Range DC 4 GHz VSWR 1.6:1 Velocity of Propagation 69.5 % Capacitance 32 [104.99] pF/ft [pF/m] DC Resistance Inner Conductor 0.91 [2.99] Ω/1000ft [Ω/Km] Dielectric Withstanding Voltage (AC) 1,500 V rms Specifications by Frequency Description F1 F2 F3 F4 F5 Units Frequency 0.1 0.4 1 3 4 GHz Electrical Specification Notes: Insertion Loss does not include the loss of the connectors. Insertion Loss is estimated as 0.1dB per connector. Mechanical Specifications Cable Assembly Description Minimum T ypical Maximum Units Cable Outer Diameter 0.19 0.195 0.2 in Weight 0.21 [95.25] lbs [g] PE3M0060 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 RF Cable Assemblies Technical Data Sheet PE3M0060 MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation. *Length Tolerances: +0.5, -0 inches for Length ≤ 1 foot; +1, -0 inches for Length >1 to 5 feet; +2, -0 inches for Length >5 to 10 feet; +3, -0 inches for Length >10 to 25 feet and +2%, -0 inches for Length >25 feet. Cable Characteristics Description Specification Cable Type M17/128-RG400 Impedance 50 Ohms Inner Conductor Type Stranded Inner Conductor Material and Plating Copper Clad Steel, Silver Dielectric Type PTFE Number of Shields 2 Shield Layer 1 Silver Clad Copper Shield Layer 2 Silver Clad Copper Outer Conductor Diameter 0.171 in [4.34 mm] Connector Characteristics Description Connector 1 Connector 2 Type BNC Male N Female Bulkhead Specification MIL-PRF-39012 MIL-PRF-39012 Impedance 50 Ohms 50 Ohms Contact Material and Plating Brass, Gold Phosphor Bronze, Gold Contact Plating Specification MIL-G-45204 MIL-G-45204 Dielectric Type T eflon T eflon Outer Conductor Material and Plating Brass, Silver Outer Conductor Plating Specification QQ-S-365 Body Material and Plating Brass, Silver Brass, Silver Body Plating Specification QQ-S-365 QQ-S-365 Coupling Nut Material and Plating Brass, Silver Coupling Nut Plating Specification QQ-S-365 Seal Gasket Material Silicone Rubber Silicone Rubber Contact Gage Specification 0.210 to 0.230 in 0.187 to 0.207 in Insulator Gage Specification 0.208 to 0.228 in Mechanical Specification Notes: PE3M0060 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 RF Cable Assemblies Technical Data Sheet MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation. Environmental Specifications Description Specification Temperature Operating Range -55 to +165 deg C Compliance Certifications (see product page for current document) Process Specifications Process Specification Soldering in accordance with J-STD-001, class 3 Crimping dies in accordance with SAE AS22520 Marking shall meet the adherence requirements of SAE AS5942 Workmanship shall be in accordance with IPC/WHMA-A-620, class 3 Tests and Inspections Description Sampling Connector Gaging (pin and insulator position) 100% Insertion Loss 100% VSWR 100% Dielectric Withstanding Voltage (DWV) 100% Visual - workmanship, configuration and marking 100% Length C=0, 1.5 AQL Mass C=0, 1.5 AQL Plotted and Other Data Notes:
- Values at 25°C, sea level. PE3M0060 REV 1.1 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 RF Cable Assemblies Technical Data Sheet MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation. How to Order Part Number Configuration: PE3M0060 - xx uu | | | Unit of Measure: | | cm = Centimeters | | <blank> = Inches | Length | Base Number Example: PE3M0060-12 = 12 inches long cable PE3M0060-100cm = 100 cm long cable MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 URL: https://www.pasternack.com/bnc-male-n-female-m17-128-rg400-cable-assembly-pe3m0060-p.aspx PE3M0060 REV 1.1 RF Cable Assemblies Technical Data Sheet MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060
any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Pasternack does not assume any liability arising out of the use of any part or documentation. 6PE3M0060 REV 1.1 *STANDARD TOLERANCES APPLY ONLY TO DIMENSIONS IN INCHES DWG TITLE 3. DIMENSIONS ARE IN INCHES [mm]. CAD FILE Pasternack Enterprises, Inc. R CAGE CODE 53919E-Mail: www.pasternack.com | P.O. Box 16759 | Irvine | CA | 92623 sales@pasternack.com Phone: (949) 261-1920 | Fax: (949) 261-7451 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE N OMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOU T NOTICE AT ANY TIME. MIL-DTL-17 BNC Male to N Female Bulkhead Cable Using M17/128-RG400 Coax PE3M0060 CAD Drawing