DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Highly durable flexible cable design with a V oP of 70% Thick wall SMA male connectors perform to 26.5 GHz T ype N connectors perform to 18 GHz Electrical performance is equivalent to that of a solid wall 141 semi-rigid assembly Shielding ef fectiveness in excess of 100 dB Operating temperature range of -55 to +125°C RoHS Compliant Custom lengths built same-day 100% Continuity , Hi-Pot, and RF Tested

Applications

  • General Purpose • Laboratory Use

Description

PE-P141 high performance coax assemblies are cost effective designs, ideal for production test environments where rugged flexible cable assemblies are required. This series includes 26.5 GHz stainless steel SMA male connectors with a thick wall outer conductor designed to extend the life of the cable assemblies. A heavy-duty boot provides improved strain relief and adds to the durability of the cable assemblies. 18 GHz stainless steel type N male connectors with hex/knurl coupling nuts are also available. These cable assemblies are built using double-shielded flexible cable providing excellent shielding greater than 100 dB. All PE-P141 test cables are 100% continuity, Hi-Pot, and RF tested to the published specifications. Custom lengths are built to order and shipped the same day. Electrical Specifications Description Minimum T ypical Maximum Units Frequency Range DC 26.5 GHz VSWR 1.45:1 Velocity of Propagation 70 % RF Shielding 1 10 dB Capacitance 29.4 [96.46] pF/ft [pF/m] Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Cable Using PE-P141 Coax with HeatShrink, LF Solder, RoHS PE350 PE350 REV 1.4 SMA Male to SMA Male Cable Using PE- P141 Coax with HeatShrink, LF Solder, RoHS RF Cable Assemblies Technical Data Sheet PE350

Specifications by Frequency Description F1 F2 F3 F4 F5 Units Frequency 3 5 10 18 26.5 GHz Electrical Specification Notes: Insertion loss does not include the loss of the connectors. Insertion loss is estimated as 0.05 x sqrt(fGHz) dB per connector. Short lengths up to 12” long may exhibit VSWR measurements up to 9% higher. Amplitude variation not to exceed 10% in a coiled vs uncoiled, a coil is defined as a 4% loop. Mechanical Specifications Cable Assembly Weight 0.101 lbs [45.81 g] Cable Cable Type PE-P141 Impedance 50 Ohms Inner Conductor Type Solid Inner Conductor Material and Plating Copper Clad Steel, Silver Dielectric Type PTFE Number of Shields 2 Shield Layer 1 Silver Plated Copper Tape Shield Layer 2 Silver Plated Copper Braid Jacket Material FEP , Blue Jacket Diameter 0.163 in [4.14 mm] Repeated Minimum Bend Radius 0.82 in [20.83 mm] Connectors Description Connector 1 Connector 2 Type SMA Male SMA Male Impedance 50 Ohms 50 Ohms Body Material and Plating Passivated Stainless Steel Passivated Stainless Steel Hex Size 5/16 inch 5/16 inch Torque 8 in-lbs [0.9 Nm] 8 in-lbs [0.9 Nm] PE350 REV 1.4 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Cable Using PE-P141 Coax with HeatShrink, LF Solder, RoHS PE350 RF Cable Assemblies Technical Data Sheet PE350 SMA Male to SMA Male Cable Using PE- P141 Coax with HeatShrink, LF Solder, RoHS

Mechanical Specification Notes: *All cable assemblies have a length tolerance of 1.5% or ± 3/8”, whichever is greater. Environmental Specifications Temperature Operating Range -55 to +125 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes: How to Order Part Number Configuration: PE350 - xx uu | | | Unit of Measure: | | cm = Centimeters | | <blank> = Inches | Length | Base Number Example: PE350-12 = 12 inches long cable PE350-100cm = 100 cm long cable SMA Male to SMA Male Cable Using PE-P141 Coax with HeatShrink, LF Solder, RoHS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male to SMA Male Cable Using PE-P141 Coax with HeatShrink, LF Solder, RoHS PE350 URL: https://www.pasternack.com/sma-male-sma-male-pe-p141-cable-assembly-pe350-p.aspx PE350 REV 1.4 RF Cable Assemblies Technical Data Sheet SMA Male to SMA Male Cable Using PE- P141 Coax with HeatShrink, LF Solder, RoHS PE350

4PE350 REV 1.4 SMA Male to SMA Male Cable Using PE-P141 Coax with HeatShrink, LF Solder, RoHS PE350 CAD Drawing