PE0201DRE070R001L YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

PE_L series 5%, 1%, 0.5% sizes 0201/0402/ 0603/ 0805/ 1206/ 2010/ 2512 RoHS compliant & Halogen free Product specification – November 28, 2016 V.5

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 SCOPE This specification describes PE series current sensor - low TCR with lead-free terminations made by meta l foil with ceramic substrate.

APPLICATIONS

 Consumer goods  Computer  Telecom / Datacom  Industrial / Power supply  Automotive  Alternative Energy

FEATURES

 AEC-Q200 qualified  Halogen -free Epoxy  RoHS compliant - Products with lead-free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS  Reduce environmentally hazardous wastes  High component and equipment reliability  None forbidden -materials used in products/production  Low re sistances applied to current sensing GLOBAL PART NUMBER PE XXXX X X X XX XXXX L (1) SIZE 0201/ 0402/ 0603/ 0805/ 1206/ 2010/ 2512 (2) TOLERANCE (3) PACKAGING TYPE R = Paper/ PE taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE E = ± 50 ppm/°C M = ± 75 ppm/°C F = ± 100 ppm/°C J = ± 350 ppm/°C (5) TAPING REEL 07 / 7W / 7T / 47 / 57= 7 inch dia. Reel and specific rated power. Detailed power rating are shown in the Table 2. (6) RESISTANCE VALUE 5 mΩ to 910 mΩ There are 3~5 digits indicated the resistance value. Letter R is decimal point. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is the system default code for ordering only. (Note) ORDERI NG EXAMPLE The ordering code of a P E2512 1W chip resistor, value 0.006 Ω with ±1% tolerance, supplied in 7 - inch tape reel is: PE2512FKM070R006 L Resistance rule of global part number Resistance code rule Example 0RXXX (1 to 910 mΩ) 0R001 = 1 mΩ 0R1 = 100 mΩ 0R91 = 910 mΩ NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead-Free Process" ORDERING INFORMATION - GLOBAL PART NUMBER Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value.

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 MARKING PE0201 / PE0402 No marking PE0603 2 digits PE0805 3 digits PE1206 4 digits The “R” is used as a decimal point; the other 3 digits are significant . PE2010 / PE2512 4 digits The “R” is used as a decimal point; the other 3 digits are significant . PF series Note: construction will be adjusted to resistance value (only for PF series). Fig. 1 YNSC123_1 YNSC143 R010 R051 Fig. 5 Chip resistor outlines OOuuttlliinneess For dimensions, please refer to Table 1 5mΩ ≦ R≦ 50mΩ 5mΩ ≦ R≦ 50mΩ Fig. 2 Value = 10 mΩ 51mΩ ≦ R≦ 910mΩ Value =51 mΩ 051 51mΩ ≦ R≦ 910mΩ Value =51 mΩ 5mΩ ≦ R≦ 50mΩ Fig. 3 Value = 10 mΩ 010 R051 51mΩ ≦ R≦ 910mΩ Value = 51 mΩ 5mΩ ≦ R≦ 50mΩ Fig. 4 Value = 10 mΩ R010 51mΩ ≦ R≦ 910mΩ 5mΩ ≦ R≦ 100mΩ Fig. 5 Value = 10 mΩ R010

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 TYPE RESISTANCE RANGE L (mm) W (mm) H (mm) I1 (mm) PE0603 PE0805 PE1206 PE2010 Note: 1. For relevant physical dimensions, please refer to construction outlines. 2. Please contact with sales offices, distributors and representatives in your region before ordering. DIMENSION Table 1 For outlines, please refer to Fig. 4

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 SERIES SIZE POWER RATING (1) TOLERANCE RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE 07 7W 7T 47 57 PE ± 0.5%(>10 mΩ) ± 1% ± 5% 50 mΩ≦ R ≦ 200mΩ 20mΩ≦ R≦ 70mΩ ± 350ppm/℃ 70mΩ<R≦ 200mΩ ±100ppm/℃ 0402 1/16W 1/8W 1/6W 1/4W --- 10 mΩ≦ R ≦ 910 mΩ ±100 ppm/°C 0603 1/10W 1/5W 1/3W 2/5W 1/2W 5mΩ, 10mΩ, 15mΩ 20 mΩ ≦ R ≦ 910 mΩ ±75 ppm/°C ±100 ppm/°C 0805 1/8W 1/4W 1/3W 1/2W --- 1206 1/4W 1/2W --- 1W --- 5 mΩ ≦ R ≦ 910 mΩ ±75 ppm/°C ±100 ppm/°C Note: 1. Global part number (code 10 - 11) 2. Please contact with sales offices, distributors and representatives in your region before ordering.

ELECTRICAL CHARACTERISTICS

Fig. 4 Chip resistor outlines Table 2 FUNCTIONAL DESCRIPTION OOPPEERRAATTIINNGG TTEEMMPPEERRAATTUURREE RRAANNGGEE PE0201 to PE0402 Range: -55°C t o +1 25°C (Fig. 6-1) PE0603 to PE2512 Range: -55°C to +170°C (Fig. 6-2) PPOOWWEERR RRAATTIINNGG Standard rated power at 70°C: PE0201 = 1/20W PE0402 = 1/16W PE0603 = 1/10W PE0805 = 1/8W PE1206 = 1/4W PE2010 = 1/2W PE2512 = 1W For detail power value, please refer to Tab le 2. RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V = )(PxR Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Re sistance value (Ω) Fig. 6-1 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) Fig. 6-2 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb)

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION PE0201 PE0402 PE0603 PE0805 PE1206 PE2010 PE2512 Paper taping reel (R) 7" (178 mm) 10,000 10,000 5,000 5,000 4,000 --- --- Embossed taping reel (K) 7" (178 mm) --- --- --- --- --- 4,000 4,000 Fig. 7 Paper Tape PAPER TAPE Table 4 Dimensions of paper tape for relevant chip resistors size SIZE SYMBOL Unit: mm A0 B0 W E F P0 P1 P2 Ø D0 T

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 Fig. 8 Embossed Tape EMBOSSED TAPE Table 5 Dimensions of embossed tape for relevant chip resistors size SIZE SYMBOL Unit: mm A0 B0 W E F P0 P1 P2 Ø D0 Ø D1 T

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 Fig. 9 Reel REEL SPECIFICATION SIZE QUANTITY PER REEL REEL SIZE SYMBOL Unit: mm 8 mm TAPE WIDE 12 mm TAPE WIDE 24 mm TAPE WIDE A N C D W1 W2 MAX. PE0201 10,000 7" PE0402 10,000 7" PE0603 5000 7" PE0805 5000 7" PE1206 4000 7" PE2010 4000 -- 7" PE2512 4000 -- 7" Table 6 Dimensions of reel specification for relevant chip resistors size LEADER/TRAILER TAPE SPECIFICATION Fig.10 Leader/Trailer Tape

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 FOOTPRINT AND SOLDERING PROFILES For recommended soldering pr ofiles, please refer to data sheet “Chip resistors mounting ”. Fig. 11 Single resistor chips recommended dimensions of footprints FOOTPRINT SIZE RESISTANCE RANGE Unit: mm A B C D PE0201 50 mΩ ≦ R ≦ 200 mΩ 1.00 0.30 0.35 0.40 PE0402 10 mΩ ≦ R ≦ 910 mΩ 1.45 0.35 0.55 0.55 PE0603 5 mΩ, 10 mΩ, 15 mΩ, 20mΩ≦ R ≦ 910 mΩ 2.52 0. 50 1.01 1.01 PE0805 5 mΩ, 10 mΩ, 15 mΩ, 20mΩ≦ R ≦ 910 mΩ 2.54 0.50 1.02 1.27 PE1206 5 mΩ ≦ R ≦ 910 mΩ 3.90 0.76 1.57 1.78 PE2010 5 mΩ ≦ R ≦ 6 mΩ 6.12 1.40 2.36 3.05 7 mΩ ≦ R ≦ 100 mΩ 6.10 3.30 1.40 3.05 PE2512 6 mΩ 7.40 3.18 2.11 3.68 7 mΩ ≦ R ≦ 100 mΩ 7.36 4.06 1.65 3.68 Table 7 Footprint dimensions

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 TESTS AND REQUIREMENTS TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108 IEC 60115-1 4.25.1 1,000 hours at 70± 2 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ± (1%+0.0005 Ω) High Temperature Exposure/ Endurance at Upper Category Temperature MIL-STD-202G-method 108 IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered No direct impingement of forced air to the parts Tolerances: 0201/0402 155± 3℃ 0603 and above 170± 3℃ ± (1%+0.0005 Ω) Moisture Resistance MIL-STD-202G-method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24± 2 hours after test conclusion ± (0.5%+0.0005 Ω) Thermal Shock MIL-STD-202G-method 107 -55/+125 °C Note: Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air ±( 1%+0.0005 Ω) Short Time Overload IEC60115-1 4.13 5 times of rated power for 5 seconds at room temperature ± (1%+0.0005 Ω) No visible damage Board Flex/ Bending IEC60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required Bending for 0201: 3mm 0402 and above: 2mm Holding time: minimum 60 seconds ± (1%+0.0005 Ω) No visible damage Biased Humidity MIL-STD-202 Method 103 1,000 hours at 85º C/85%R.H. 10% of operating power, no condensation on the devices, circulating air. Table 8 T est condition, procedure and requirements

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds Well tinned (≥95% covered) No visible damage - Leaching IPC/JEDEC J-STD-002B test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat MIL-STD-202G-method 210F IEC 60115-1 4.18 Condition B, no pre-heat of samples Leadfree solder, 260 °C, 10 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol ± (0.5%+0.0005 Ω) No visible damage

Chip Resistor Surface Mount www.yageo.com Nov. 28, 2016 V.5 Product specification SERIES PE_L 0201 /0402/ 0603/ 0805/ 1206/ 2010/ 2512 “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”

REVISION HISTORY

TYPE POWER TOLERANCE RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE PF ± 1% ± 2% ± 5% 5 mΩ≦ R < 100 mΩ ±75 ppm/°C 0805 1/8W, 1/4W, 1/3W, 1/2W 4 mΩ ≦ R < 100 mΩ 1206 1/4W, 1/2W 3 mΩ ≦ R < 100 mΩ 2010 1/2W, 1W The resistors are constructed using outstanding TCR level material, which makes Yageo PF resistors excellent for current sensing application in battery charger circuit & DC-DC converter. The composition of the resistive material is adjusted to give the approximate required resistance and is covered with a protective coating, which printed with the resistance value. Finally, the three external terminations (Ni / matte Tin) are added, as shown in Fig. 4. 5 mΩ ≦ R < 100 mΩ 2512 1W, 2W 1 mΩ ≦ R < 100 mΩ 3W 1 mΩ ≦ R ≦ 50 mΩ 4527 2W, 3W, 5W 6 mΩ ≦ R < 1Ω NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 5 Nov 23,2016 - - Extend resistor value for 0.5% Version 4 Dec. 21, 2015 - - Update resistance value Version 3 Aug. 06, 2015 - - Update 0603 to 1206 TCR Version 2 Apr. 20, 2015 - - Extend resistor value Version 1 Mar. 04, 2015 - - Update TCR and operating temperature Version 0 Feb. 10, 2015 - - New datasheet for current sensor - low TCR PE series sizes of 0201/0402/0603/0805/1206/2010/2512, 0.5%, 1%, and 5%