PE05B-0402 FS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

 ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge typical 8KV, max 15KV IEC61000-4-2 ESD air discharge typical 15KV, max 25KV  Double layer structure  Surface mount  Very low capacitance  Very low leakage current  Fast response time  Bi-directional ESD protection  Lead free solder termination  The best ESD protection for high frequency, low voltage a pplications

Applications

 High Definition Multi-Media Interface (HDMI)  Digital Visual Interface (DVI)  Display Port Interface (DP)  Unified Display Interface (UDI)  Mobile Display Digital Interface (MDDI)  Gigabit Ethernet  USB2.0 and USB3.0  IEEE1394 interface Caution: This component is designed for signal line protection only, not intended to be used under bias, not for application with a power line. Absolute Maximum Ratings Parameter Symbol Value Unit Maximum Contact discharge voltage Per IEC61000-4-2 --- 15KV V Maximum Air discharge voltage Per IEC61000-4-2 --- 25KV V Maximum Operating temperature TOPER -40 to +125 ℃ Maximum Storage temperature TSTG -55 to +150 ℃ Maximum lead temperature for soldering during 10s TL 260 ℃ Electrical characteristics (TA =25°C)

Electrical Characteristics

Parameter Symbol Test Conditions Min Typ Max Units Continuous operating voltage VDC --- --- --- 5 V Trigger voltage VT IEC61000-4-2 8KV contact discharge --- 500 --- V Clamping voltage VC IEC61000-4-2 8KV contact discharge --- 35 --- V Leakage current IL DC 5V shall be applied on component --- 0.01 1 uA Capacitance CP VR = 0V, f = 1MHz --- 0.15 0.25 pF Notes: 1 , Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method. 2, After reliability tests such as high Temp storage, Temp cycles, continuous ESD strike etc, the maximum leakage current is less than 10uA. Product Pictures Schematic Diagram

  1. 02. 17 2/3Revision No : 1 PE05B-0402 Typical PESD clamping for +8KV pulse per IEC61000-4-2 Product & PAD Dimension Product dimension Recommended PAD Dimension

Package Information

-50 150 250 350 450 550 -50 0 50 100 150 200 250 ESD Wave after Clamping Dimension Unit: Millimeters Min Typ Max D 0.90 1.05 1.20 E 0.45 0.55 0.65 L 0.15 0.25 0.35 A 0.25 0.36 0.45 Dimension Typical Unit A0 0.75 mm B0 1.22 K0 0.43 D 1.55 P0 4.00 P1 2.00 P2 2.00 E 1.75 F 3.50 W 8.00 tr = 0.7 ns to 1ns 30 ns 30 ns 10% IPP 100% 90% 60 ns Unit: ns Unit: V

  1. 02. 17 3/3Revision No : 1 PE05B-0402 Reel Dimension Marking and Order Information Part Number System PE 05 B - 0402 Order Information Device Package Carrier Quantity HSF Status PE05B-0402 1005 Tape & Reel 10,000pcs/reel RoHS compliant