PE000DD3D MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject Germany: 49-89-6089-0 are metric equivalents. to change. P Series P Series CORCOM Product Guide The CHAMELEON Adaptable Module for General Purpose, DC Applications The DC version of the “P Series” power entry module offers full flexibility of design in the most compact package. It is a general purpose filter specifically designed for DC applications up to 80VDC. This module comes in snap-in or flange mount versions for easy mounting. It also allows for a single or dual fuse option. The DC version of the “P Series” was designed to address the increasing demand for filtering on central office equipment and customer premises equipment, but not restricted to this type of equipment. Some examples include routers, desktop servers and switches multiplexors, aggregators, concentrators, etc. The DC versions of the P Series mates with a standard MOLEX connector (HCS Series) which is readily available and better prevents accidental connection to AC power. Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz Rating .03 .1 .15 .5 1 3 5 10 30 03A 7 17 21 27 33 40 44 50 32 0 6A - 8 12 17 23 32 36 44 30 10A - 3 5 10 13 23 27 35 27 Line-to-line in 50 ohm circuit Current Frequency-MHz Rating .10 .15 .5 1 3 5 10 30 0 3A 2 4 12 15 30 48 50 45 0 6A 2 4 12 15 22 42 55 45 10A 2 4 12 15 22 42 55 45 Specifications Hipot rating (one minute): line-to-ground 2250 VDC line-to-line 1450 VDC Fuseholder: 1/4" x 1 1/4" or Accepts one or two fuses* 5 x 20 mm Rated voltage (max): 80 VDC Terminals: .187 x .032 [4.8 x .81] terminal tabs Operating Ambient Temperature Range: (@ rated current Ir) -10˚C to +40˚C In an ambient, Ta, higher than +40˚C, the maximum operating current, Io, is as follows: * Conversion clip provided on fuseholder for single fuse models. Electrical Schematic UL Recognized CSA Certified TUV Approved LINE LOAD 85 - Ta Io = Ir
The CHAMELEON Adaptable Module for General Purpose, DC Applications (Continued) 155 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject Germany: 49-89-6089-0 are metric equivalents. to change. DCFilters P Series CORCOM Product Guide Case Styles A B C F ∅ .06 Min. 1.54 Case Dimensions PartNo. ABC D E F (max) (max) (max) Part Numbers PE000DD3D PS000DD3D PE000DD6D PS000DD6D PE000DDXD PS000DDXD PE000SD3D PS000SD3D PE000SD6D PS000SD6D PE000SDXD PS000SDXD DC Connector No. GA210 PE A B C PS Recommended Panel Cutout +.008/-.000 +.20/-.00 +.008/-.000 +.20/-.00
Ordering Information
E = Mounting ears S = Snap-in Extender Options 0 = None Switch Options 0 = No switch Input Voltage Select 0 = Single voltage Fuse Options D = Dual fuse S = Single fuse Shield Options D = Complete shield (DC version) Filter Current 3 = 3 amps 6 = 6 amps X = 10 amps Filter Type D = DC version PS000DD3D D E .06 1.52 R Max. .020 .508 R Min. External Edge (1) Note:The external edges (installation side) on the "D" sides of the cutout should have a minimum .020" radius. For optional retention against extraction, the corresponding inner edge should be sharp, without paint or coatings. Edge coatings, including anodization are also discouraged for good shield contact. Mating Connectors CORCOM Part Number: GA210 - Custom connector assembly with 2, 36” long 18 gauge wires to mate with P Series filter MOLEX Component Part Numbers: 03-12-1026 Connector housing to mate with P Series 18-12-1222 Female Terminal (2 needed per housing) Red Black