PE000031 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> V1.027/01/21 DC Power Chassis Jack Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Specifications Gender : Jack Contact Termination : Solder Mounting Type : Chassis Current Rating : 4A Voltage Rating : 25V DC Pin Diameter : 2.5mm Barrel Outer Diameter : 5.6mm Connector Colour : Black Diagram Dimensions : Millimetres Material Specifications No. Parameter Material
1 Body Brass
2 Nut Brass
3 Ferrule Ferrous
4 Dielectric ABS
5 Contact Patch Brass
DC Power Chassis Jack, 2.5mm, 4A, 24V DC, Solder, Black PE000031 Electrical Specifications Contact Resistance : ≤ 2mΩ Insulation Resistance : 500V DC, ≥ 100MΩ min. Withstand Voltage : 100V DC Current Rating : 4A, 24V DC Operating Temperature : -30°C to 60°C Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.