PDZ11B PHILIPS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Supersedes data of 2002 Feb 18

2004 Mar 22

2004 Mar 22 2

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series

FEATURES

  • Total power dissipation: max. 400 mW
  • Small plastic package suitable for surface mounted design
  • Wide variety of voltage ranges: nominal 2.4 to 36 V (E24 range)
  • Tolerance approximately ±2%.

APPLICATIONS

  • General voltage regulation.

DESCRIPTION

Low-power general purpose voltage regulator diodes in a small plastic SMD SOD323 (SC-76) package. PINNING PIN DESCRIPTION 1 cathode 2 anode Fig.1 Simplified outline (SOD323; SC-76) and symbol. handbook, halfpage Top view MAM387 The marking bar indicates the cathode. MARKING

ORDERING INFORMATION

PDZ2.4B Z0 PDZ5.1B Z8 PDZ11B ZG PDZ24B ZQ PDZ2.7B Z1 PDZ5.6B Z9 PDZ12B ZH PDZ27B ZR PDZ3.0B Z2 PDZ6.2B ZA PDZ13B ZJ PDZ30B ZS PDZ3.3B Z3 PDZ6.8B ZB PDZ15B ZK PDZ33B ZT PDZ3.6B Z4 PDZ7.5B ZC PDZ16B ZL PDZ36B ZU PDZ3.9B Z5 PDZ8.2B ZD PDZ18B ZM PDZ4.3B Z6 PDZ9.1B ZE PDZ20B ZN PDZ4.7B Z7 PDZ10B ZF PDZ22B ZP TYPE NUMBER PACKAGE NAME DESCRIPTION VERSION PDZ2.4B to PDZ36B − plastic surface mounted package; 2 leads SOD323

2004 Mar 22 3

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). Note 1. Device mounted on a printed-circuit board measuring 11 × 25 × 1.6 mm. THERMAL CHARACTERISTICS Note 1. Device mounted on a printed-circuit board measuring 11 × 25 × 1.6 mm. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT IF continuous forward current − 200 mA IZSM non-repetitive peak reverse current tp = 100 μs; square wave; Tamb = 25 °C prior to surge see Table 2 Ptot total power dissipation Tamb = 25 °C; note 1; see Fig.2 − 400 mW Tstg storage temperature −65 +150 °C Tj junction temperature − 150 °C SYMBOL PARAMETER CONDITIONS VALUE UNIT Rth(j-s) thermal resistance from junction to soldering point 130 K/W Rth(j-a) thermal resistance from junction to ambient note 1 340 K/W

2004 Mar 22 4

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series CHARACTERISTICS Table 1 Total series Tj = 25 °C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MAX. UNIT VF forward voltage IF = 10 mA; see Fig.3 0.9 V IF = 100 mA; see Fig.3 1.1 V IR reverse current PDZ2.4B VR = 1 V 50 μA PDZ2.7B VR = 1 V 20 μA PDZ3.0B VR = 1 V 10 μA PDZ3.3B VR = 1 V 5 μA PDZ3.6B VR = 1 V 5 μA PDZ3.9B VR = 1 V 3 μA PDZ4.3B VR = 1 V 3 μA PDZ4.7B VR = 1 V 2 μA PDZ5.1B VR = 1.5 V 2 μA PDZ5.6B VR = 2.5 V 1 μA PDZ6.2B VR = 3 V 500 nA PDZ6.8B VR = 3.5 V 500 nA PDZ7.5B VR = 4 V 500 nA PDZ8.2B VR = 5 V 500 nA PDZ9.1B VR = 6 V 500 nA PDZ10B VR = 7 V 100 nA PDZ11B VR = 8 V 100 nA PDZ12B VR = 9 V 100 nA PDZ13B VR = 10 V 100 nA PDZ15B VR = 11 V 50 nA PDZ16B VR = 12 V 50 nA PDZ18B VR = 13 V 50 nA PDZ20B VR = 15 V 50 nA PDZ22B VR = 17 V 50 nA PDZ24B VR = 19 V 50 nA PDZ27B VR = 21 V 50 nA PDZ30B VR = 23 V 50 nA PDZ33B VR = 25 V 50 nA PDZ36B VR = 27 V 50 nA

2004 Mar 22 5

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B seriesTable 2 Per type Tj = 25 °C unless otherwise specified. TYPE NUMBER WORKING VOLTAGE VZ (V) at IZ = 5 mA DIFFERENTIAL RESISTANCE rdif (Ω) TEMP. COEFF. SZ (mV/K) at IZ = 5 mA (see Figs 4 and 5) DIODE CAP. Cd (pF) at f = 1 MHz; VR = 0 NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 μs; Tamb = 25 °C MIN. MAX. MAX. at IZ (mA) MAX. at IZ (mA) TYP. MAX. MAX.

2004 Mar 22 6

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series GRAPHICAL DATA Fig.2 Power derating curve. handbook, halfpage 0 50 100 200 Tamb (°C) Ptot (mW) 500 400 300 100 200 150 MBK245 Tj = 25 °C. Fig.3 Forward current as a function of forward voltage; typical values. handbook, halfpage 0.6 1 300 100 200 MBG781

0.8 VF (V)

(mA) Fig.4 Temperature coeffici ent as a function of working current; typical values. PDZ2.4B to PDZ4.3B. Tj = 25 °C to 150 °C. handbook, halfpage 06 0 MGL273 20 40 IZ (mA) SZ (mV/K) 4.3 3.9 3.6 3.3 3.0 2.4 2.7 Fig.5 Temperature coeffici ent as a function of working current; typical values. PDZ4.7B to PDZ12B. Tj = 25 °C to 150 °C. handbook, halfpage 02 0 16 MGL274 48 1 2 IZ (mA) SZ (mV/K) 4.7 9.1 8.2 7.5 6.8 6.2 5.6 5.1

2004 Mar 22 7

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series PACKAGE OUTLINE REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOD323 SC-76 SOD323 03-12-17 06-03-16 Note 1. The marking bar indicates the cathode UNIT A mm 0.051.1 0.8 0.40 0.25 0.25 0.10 1.8 1.6 1.35 1.15 2.7 2.3 0.45 0.15 max DIMENSIONS (mm are the original dimensions) Plastic surface-mounted package; 2 leads (1) 2 mm scale bp c D E HD Q 0.25 0.15 Lp v 0.2 AD A E Lp bp detail X c Q HD vAM X

2004 Mar 22 8

NXP Semiconductors Product data sheet Voltage regulator diodes PDZ-B series DATA SHEET STATUS Notes 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DOCUMENT STATUS(1) PRODUCT STATUS(2) DEFINITION Objective data sheet Development This document contains data from the objective specification for product development. Preliminary data sheet Qualification This document contains data from the preliminary specification. Product data sheet Production This document contains the product specification. DISCLAIMERS General ⎯ Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes ⎯ NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use ⎯ NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications ⎯ Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values ⎯ Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale ⎯ NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license ⎯ Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control ⎯ This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data ⎯ The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.

For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com © NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version. Printed in The Netherlands R76/05/pp9 Date of release: 2004 Mar 22 Document order number: 9397 750 12615