PDUBHV10 TRIPPLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads PDUBHV10 is universally compatible with any Tripp Lite or other brand of 200-240V UPS rated up to 1500VA with a C14 input cable option 2U horizontal rackmount form factor compatible with 2 or 4 post racks● Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations, see manual) Pair of detachable PDU input cables connect to separate Utility and UPS power sources (2 C13-C14 interconnect cables included - user supplied alternate cabling supported)

8 C13 outlets support critical networking loads in both Utility and UPS operating modes●

One additional C13 pass-through outlet supports UPS input power cord● Highlights Single phase 10A 200-240V Hot-swap PDU Enables live replacement of a standard UPS with zero downtime 2U horizontal rackmount installation Compatible with any 200-240V UPS with a C14 input Manual transfer switch controls PDU input power source Pair of C14 compatible inputs connect to separate Utility and UPS inputs

8 Built-in C13 outlets●

Hot-swap PDU System● 2U mounting brackets● Set of 2 C13-C14 interconnect cables User manual with warranty information

Dual input power cables support PDU connection to separate Utility and UPS power sources● Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one Once the new UPS is up and running with all connections restored, set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment OVERVIEW UPC Code 037332153906 PDU Type Hot-Swap OUTPUT Output Watt Capacity (Watts) 2300 outlet Frequency Compatibility 50 / 60 Hz Output Receptacles (9) C13 Output Nominal Voltage 200; 208; 220; 230; 240 Overload Protection n/a INPUT PDU Input Voltage 200; 208; 220; 230; 240 Maximum Input Amps 10.0 Input Connection Type UTILITY & UPS inputs are available from separately labeled C14 inlets, compatible with included C13-C14 interconnect cables or with compatible user-supplied cabling PDU Plug Type IEC-320 C14 Input Cord Length (ft.) 6 Input Cord Length (m) 1.83 Input Phase Single-Phase USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs Lighted indicators confirm UPS and Utility switch position and operating mode

© 2019 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies Switches Manual 2 position transfer switch offers fast switching between UPS and Utility operating modes in less than 6 milliseconds PHYSICAL Minimum Required Rack Depth (inches) 8.3 Minimum Required Rack Depth (cm)21.08 Shipping Dimensions (hwd / in.) 12.30 x 20.20 x 6.10 Shipping Dimensions (hwd / cm) 31.24 x 51.31 x 15.49 Shipping Weight (lbs.) 7.80 Shipping Weight (kg) 3.54 Unit Dimensions (hwd / in.) 3.42 x 17.32 x 3.03 Unit Dimensions (hwd / cm) 8,7 x 44 x 7,7 Unit Weight (lbs.) 7.70 Unit Weight (kg) 3.49 Material of Construction Metal Form Factors Supported 2U rackmount in 2 or 4 post racks PDU Form Factor Horizontal (2U) ENVIRONMENTAL Storage Temperature Range 5 to 122F (-15 to 50C) Relative Humidity 5-95% non condensing Operating Elevation (ft.) 0-10,000 Operating Elevation (m) 0-3000 CERTIFICATIONS Certifications Tested to UL60950 (USA), CSA (Canada), CE (IEC60950) WARRANTY Product Warranty Period (Worldwide) 2-year limited warranty