DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.pduke.com 2013/5/3 PDS(H)03 SERIES

3 WATTS DC-DC CONVERTER

4.5 ~ 9VDC 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Input filter Capacitor type Input surge voltage 5V input 12V input 24V input 48V input 15VDC 1sec, max. 25VDC 1sec, max. 50VDC 1sec, max. 100VDC 1sec, max. Input reflected ripple current(Note 6) 5V input 12V input 24V input 48V input 80mAp-p 40mAp-p 30mAp-p 20mAp-p Start up time Nominal input and constant resistive load Power up Remote ON/OFF 5ms 5ms Remote ON/OFF DC-DC ON DC-DC OFF Open or high impedance Control pin applied current 2 ~ 4mA max(via 1k Ω ) Remote off state input current Nominal input 2.5mA, max. Application circuit: ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +71ºC (without derating) +71ºC ~ +85ºC (with derating) Storage temperature range -55ºC ~ +125ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity(non-condensing) 5% to 90% RH Lead-free reflow solder process IPC J-STD-020D Moisture sensitivity level(MSL) IPC J -S TD- 033B Lev el 2a OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% No load to Full load Single Dual ±1.0% ±1.0% Load regulation 10% load to 90% load Single Dual ±0.5% ±0.8% Cross regulation (Dual) Asymmetrical load 25%/100% FL ±5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 250µs Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Standard Suffix ”H” 1600VDC, min.1 minute 3000VDC, min.1 minute Isolation resistance 500VDC 109ohms, min. Isolation capacitance Standard Suffix ”H” 50pF, max. 50pF, max. Switching frequency 100kHz, min. Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 Dimensions 0.74 x 0.50 x 0.33 Inch (18.9 X 12.8 X 8.4 mm) Weight 4.5g(0.16oz) MTBF(Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 4.386 x 106 hrs 2.401 x 10 6 hrs EMC CHARACTERISTICS EMI (Note 6) EN55022 Class A, Class B ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A T E C H N I C AL S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 3 WATTS MAXIMUM OUTPUT POWER
  • SMD AND DIP PACKAGE, 0.74 x 0.50 x 0.33 INCH
  • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PRO CESS ACCORDING IPC J-STD-020D
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • HIGH EFFICIENCY UP TO 83%
  • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OP TION
  • LOW RIPPLE & NOISE
  • EXTERNAL ON/OFF CONTROL
  • SWITCHING FREQUENCY (100kHz, MIN)
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • UL94-V0 PACKAGE MATERIALS
  • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
  • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
  • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU O PTIONS 3000VDC ISOLATION

DESCRIPTION

The PDS03(SMD type), PDH03(DIP type) offer 3 watts of output power from a 0.74 x 0.50 x 0.33 inch package without derating to 71ºC. The PDS(H)03 series have 2:1 wide input voltage of 4.5~9, 9~18, 18~36 and 36~75VDC and features 3000VDC of isolation, short-circuit protection.

APPLICATIONS

Page 2 of 3 www.pduke.com 2013/5/3 PDS(H)03 SERIES Voltage Min. load Full load Output (2) Ripple & Noise No load (3) Input Current Eff (4) (%) Capacitor (5) Load max. PDS(H)03-05S3P3 4.5 ~ 9 VDC 3.3 VDC 0mA 700mA 30 mVp-p 40mA 75 3300µF PDS(H)03-05S05 4.5 ~ 9 VDC 5 VDC 0mA 600mA 30 mVp-p 40mA 79 1680 µF PDS(H)03-05S09 4.5 ~ 9 VDC 9 VDC 0mA 333mA 30 mVp-p 40mA 79 1000µF PDS(H)03-05S12 4.5 ~ 9 VDC 12 VDC 0mA 250mA 30 mVp-p 40mA 80 820 µF PDS(H)03-05S15 4.5 ~ 9 VDC 15 VDC 0mA 200mA 30 mVp-p 50mA 81 680µF PDS(H)03-05D05 4.5 ~ 9 VDC ±5 VDC 0mA ±300mA 30 mVp-p 50mA 80 ±1000 µF PDS(H)03-05D12 4.5 ~ 9 VDC ±12 VDC 0mA ±125mA 30 mVp-p 50mA 80 ±470µF PDS(H)03-05D15 4.5 ~ 9 VDC ±15 VDC 0mA ±100mA 30 mVp-p 55mA 81 ±330 µF PDS(H)03-12S3P3 9 ~ 18 VDC 3.3 VDC 0mA 700mA 30 mVp-p 30mA 76 3300µF PDS(H)03-12S05 9 ~ 18 VDC 5 VDC 0mA 600mA 30 mVp-p 30mA 81 1680 µF PDS(H)03-12S09 9 ~ 18 VDC 9 VDC 0mA 333mA 30 mVp-p 30mA 80 1000µF PDS(H)03-12S12 9 ~ 18 VDC 12 VDC 0mA 250mA 30 mVp-p 30mA 82 820 µF PDS(H)03-12S15 9 ~ 18 VDC 15 VDC 0mA 200mA 30 mVp-p 30mA 82 680µF PDS(H)03-12D05 9 ~ 18 VDC ±5 VDC 0mA ±300mA 30 mVp-p 30mA 80 ±1000 µF PDS(H)03-12D12 9 ~ 18 VDC ±12 VDC 0mA ±125mA 30 mVp-p 30mA 82 ±470µF PDS(H)03-12D15 9 ~ 18 VDC ±15 VDC 0mA ±100mA 30 mVp-p 30mA 83 ±330 µF PDS(H)03-24S3P3 18 ~ 36 VDC 3.3 VDC 0mA 700mA 30 mVp-p 13mA 76 3300µF PDS(H)03-24S05 18 ~ 36 VDC 5 VDC 0mA 600mA 30 mVp-p 13mA 81 1680µF PDS(H)03-24S09 18 ~ 36 VDC 9 VDC 0mA 333mA 30 mVp-p 13mA 82 1000µF PDS(H)03-24S12 18 ~ 36 VDC 12 VDC 0mA 250mA 30 mVp-p 13mA 82 820µF PDS(H)03-24S15 18 ~ 36 VDC 15 VDC 0mA 200mA 30 mVp-p 13mA 83 680µF PDS(H)03-24D05 18 ~ 36 VDC ±5 VDC 0mA ±300mA 30 mVp-p 13mA 80 ±1000µF PDS(H)03-24D12 18 ~ 36 VDC ±12 VDC 0mA ±125mA 30 mVp-p 13mA 83 ±470µF PDS(H)03-24D15 18 ~ 36 VDC ±15 VDC 0mA ±100mA 30 mVp-p 13mA 83 ±330µF PDS(H)03-48S3P3 36 ~ 75 VDC 3.3 VDC 0mA 700mA 30 mVp-p 10mA 76 3300µF PDS(H)03-48S05 36 ~ 75 VDC 5 VDC 0mA 600mA 30 mVp-p 10mA 81 1680 µF PDS(H)03-48S09 36 ~ 75 VDC 9 VDC 0mA 333mA 30 mVp-p 10mA 80 1000µF PDS(H)03-48S12 36 ~ 75 VDC 12 VDC 0mA 250mA 30 mVp-p 10mA 82 820 µF PDS(H)03-48S15 36 ~ 75 VDC 15 VDC 0mA 200mA 30 mVp-p 10mA 82 680µF PDS(H)03-48D05 36 ~ 75 VDC ±5 VDC 0mA ±300mA 30 mVp-p 10mA 81 ±1000 µF PDS(H)03-48D12 36 ~ 75 VDC ±12 VDC 0mA ±125mA 30 mVp-p 10mA 83 ±470µF PDS(H)03-48D15 36 ~ 75 VDC ±15 VDC 0mA ±100mA 30 mVp-p 10mA 83 ±330 µF PDS03-48S05 Derating Curve PDS03-48S05 Efficiency VS Input Voltage PDS03-48S05 Efficiency VS Output Load 36 40 44 48 52 56 60 66 72 75 INPUT VOLTAGE(V) EFFICIENCY(%). 10 20 30 40 50 60 70 80 90 100 % of FULL LOAD EFFICIENCY(%). Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment) 2. Typical value at nominal input and full load. (20MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. The PDS(H)03 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 μ F/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used.

Page 3 of 3 www.pduke.com 2013/5/3 PDS(H)03 SERIES MECHANICAL DRAWING：： ：： DIP TYPE SMD TYPE PIN CONNECTION PIN SINGLE DUAL 1 -INPUT -INPUT

2 CTRL CTRL

6 NC COMMON

7 NC -OUTPUT

  1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1)