PDR3G

Document overview

  • Manufacturer or author: Diodes Incorporated
  • PDF pages: 3

Technical content

Features

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Mechanical Data Characteristic Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 400 V RMS Reverse Voltage VR(RMS) 283 V Average Rectified Output Current (See also figure 4) IO 3 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IFSM 100 A Maximum Ratings @ TA = 25°C unless otherwise specified E E1 A D e E D e L LEFT PIN RIGHT PIN Note: Pins Left & Right must be electrically connected at the printed circuit board. BOTTOMSIDE HEAT SINK W PowerDIä5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.05 NOM E 6.40 6.60 e 1.84 NOM E1 5.30 5.45 E2 3.55 NOM L 0.75 0.95 L1 0.50 0.65 W 1.20 1.50 All Dimensions in mm Characteristic Symbol Typ Max Unit Thermal Resistance Junction to Soldering Point RqJS ¾ 2.0 °C/W Thermal Resistance Junction to Ambient Air (Note 2) RqJA 75 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 3) RqJA 65 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 4) RqJA 45 ¾ °C/W Operating Temperature Range Tj -65 to +150 °C Storage Temperature Range TSTG -65 to +150 °C Thermal Characteristics

  • Glass Passivated Die Construction
  • Low Leakage Current
  • High Forward Surge Current Capability
  • Lead Free Finish, RoHS Compliant (Note 1)
  • "Green" Molding Compound (No Br, Sb)
  • Qualified to AEC-Q101 Standards for High Reliability
  • Case: PowerDIä5
  • Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020C
  • Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208
  • Polarity: See Diagram
  • Marking: See Page 3
  • Weight: 0.095 grams (approximate)

DS30547 Rev. 7 - 2 2 of 3 PDR3G PowerDI is a trademark of Diodes Incorporated. www.diodes.com I , INSTANTANEOUS FORWARD CURRENT (A)F V , INSTANTANEOUS FORWARD VOLTAGE (V)F Fig. 1 Typical Forward Characteristics 100 100m 10m T = 25°Cj T = 85°Cj T = 150°Cj T = -65°Cj 0 80 160 240 400 V , INSTANTANEOUS REVERSE VOLTAGE (V)R Fig. 2 Typical Reverse Characteristics 320 10n 100n I , INSTANTANEOUS REVERSE CURRENT (A)R T = +125°Cj T = +150°Cj T = +85°Cj T = +25°Cj T = -65°Cj C , TOTAL CAPACITANCE (pF)T V , REVERSE VOLTAGE (V)R Fig. 3 Typical Total Capacitance vs. Reverse Voltage 0 5 10 15 20 25 30 f = 1 MHz 0.75 1.5 2.25 3.75 3.0 0 25 50 75 100 125 150 I , DC FORWARD CURRENT (A)F T , AMBIENT TEMPERATURE (°C)A Fig. 4 DC Forward Current Derating Note 2 Note 4 Electrical Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max Unit Test Condition Reverse Breakdown Voltage (Note 5) V(BR)R 400 ¾ ¾ V IR = 10mA Forward Voltage VF ¾ 0.92 1.15 V IF = 3A, TS = 25°C Reverse Leakage Current (Note 5) IR ¾ 0.015 250 mA TS = 25°C, VR = 400V TS = 125°C, VR = 400V Reverse Recovery Time trr ¾ 3.0 ¾ ms IF = 0.5A, IR = 1.0A, Irr = 0.25A Notes: 5. Short duration test pulse used to minimize self-heating effect.

DS30547 Rev. 7 - 2 3 of 3 PDR3G PowerDI is a trademark of Diodes Incorporated. www.diodes.com Marking Information Device Packaging Shipping PDR3G-13 PowerDIä5 5000/Tape & Reel Ordering Information (Note 6) R3G = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last two digits of year ex: 05 for 2005 WW = Week code 01 to 52 K = Factory Designator YYWWK R3G 0 1 32 4 5 P , FORWARD POWER DISSIPATION (W)F I , FORWARD CURRENT (A)F Fig. 5 Forward Power Dissipation IPK IAV = 1 (DC) 150 180 120 0 100 200 300 400 T , DERATED AMBIENT TEMPERATURE (°C)A V , DC REVERSE VOLTAGE (V)R Fig. 6 Operating Temperature Derating IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.