PDQE10 CUI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

cui.com date 06/21/2018 page 1 of 10 SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER

FEATURES

  • industry standard footprint
  • board, chassis and Din rail versions available
  • industrial operating temp -40~+85°C
  • 1500 Vdc isolation voltage
  • industry standard footprint compatible with CUI legacy PDQ10 series
  • high efficiency up to 88%
  • 4:1 input rating
  • single & dual output models available
  • output short circuit, over current & overvoltage protection
  • compliant with CISPR22/EN55022 Class A MODEL input voltage output voltage output current output power ripple & noise1 efficiency2 typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PDQE10-Q24-S3 24 9~36 3.3 0 2400 7.92 80 79 PDQE10-Q24-S5 24 9~36 5 0 2000 10 80 83 PDQE10-Q24-S9 24 9~36 9 0 1111 10 80 86 PDQE10-Q24-S12 24 9~36 12 0 833 10 80 87 PDQE10-Q24-S15 24 9~36 15 0 667 10 80 87 PDQE10-Q24-S24 24 9~36 24 0 416 10 80 88 PDQE10-Q24-D53 24 9~36 ±5 0 ±1000 10 80 83 PDQE10-Q24-D93 24 9~36 ±9 0 ±555 10 80 86 PDQE10-Q24-D123 24 9~36 ±12 0 ±416 10 80 87 PDQE10-Q24-D153 24 9~36 ±15 0 ±333 10 80 87 PDQE10-Q24-D243 24 9~36 ±24 0 ±208 10 80 87 PDQE10-Q48-S3 48 18~75 3.3 0 2400 7.92 80 79 PDQE10-Q48-S5 48 18~75 5 0 2000 10 80 83 PDQE10-Q48-S12 48 18~75 12 0 833 10 80 87 PDQE10-Q48-S15 48 18~75 15 0 667 10 80 87 PDQE10-Q48-S24 48 18~75 24 0 416 10 80 88 PDQE10-Q48-D5 48 18~75 ±5 0 ±1000 10 80 83 PDQE10-Q48-D12 48 18~75 ±12 0 ±416 10 80 87 PDQE10-Q48-D15 48 18~75 ±15 0 ±333 10 80 87 PDQE10-Q48-D24 48 18~75 ±24 0 ±208 10 80 87 Notes: 1. From 5~100% load, nominal input, 20 MHz bandwidth oscilloscope, with 10 µF tantalum and 1 µF ceramic capacitors on the output. From 0~5% load, ripple and noise is <5% Vo. 2. Measured at nominal input voltage, full load. The typical efficiencies for the chassis mount and DIN-rail mount versions are ~2% less than the DIP versions due to the input reverse polarity protection. 3. In addition to all DIP versions, chassis mount and DIN-rail mount versions of these models are UL approved. 4. All specifications are measured at Ta=25°C, humidity < 75%, nominal input voltage, and rated output load unless otherwise specified. For more information, please visit the product page.

cui.com date 06/21/2018 │ page 2 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER INPUT parameter conditions/description min typ max units operating input voltage5 24 Vdc input models

48 Vdc input models

start-up voltage5 24 Vdc input models

24 Vdc input models

-0.7 -0.7 100 Vdc Vdc under voltage shutdown 24 Vdc input models 5.5 6.5 15.5 Vdc Vdc current 24 Vdc input models 3.3 Vdc output models all other models 429 515 mA mA 48 Vdc input models 3.3 Vdc output models all other models 215 258 mA mA remote on/off (CTRL)6 turn on (3.5~12 Vdc or open circuit) turn off (<1.2 Vdc) input current when switched off 6 10 mA filter Pi filter input reverse polarity protection only present on chassis mount and DIN-rail mount models no load power consumption 0.12 W Notes: 5. The minimum input voltage and start-up voltage for the chassis mount and DIN-rail mount versions are 1 Vdc higher than the DIP versions. 6. The voltage of the Ctrl pin is referenced to input GND pin. OUTPUT parameter conditions/description min typ max units maximum capacitive load7 3.3, 5 Vdc output models ±5 Vdc output models 9, ±9 Vdc output models ±12 Vdc output models ±15 Vdc output models all other models 2,200 1,000 680 470 330 100 μF μF μF μF μF μF voltage accuracy8 0% to full load ±1 ±3 % line regulation from low line to high line, full load positive outputs negative outputs ±0.2 ±0.5 ±0.5 load regulation9 from 5% to full load positive outputs negative outputs ±0.5 ±0.5 ±1.5 voltage balance10 dual output models ±5 % Note: 7. Tested at input voltage range and full load. 8. At 0~5% load, the max output voltage accuracy for the ±5 & ±9 Vdc output models is ±5%. 9. At 0~100% load, the max load regulation is ±5%. 10. Unbalanced loads should not exceed ±5%. If ±5% is exceeded, the product performance cannot be guaranteed. PART NUMBER KEY Base Number PDQE10 - QXX - X XX - X Input Voltage Output Voltage Mounting Style: D = DIP T = chassis mount DIN = DIN-rail mount Output: S = single D = dual For more information, please visit the product page.

cui.com date 06/21/2018 │ page 3 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER OUTPUT (CONTINUED) parameter conditions/description min typ max units cross regulation dual output models: main output 50% load secondary output from 10~100% load ±5 % switching frequency11 PWM mode 350 kHz transient recovery time 25% load step change, nominal input voltage 300 500 μs transient response deviation 25% load step change, nominal input voltage ±3 ±5 % temperature coefficient at full load ±0.03 %/°C Note: 11. Value is based on full load. At loads <10%, the switching frequency decreases with decreasing load PROTECTIONS parameter conditions/description min typ max units over voltage protection 110 160 % over current protection 110 140 190 % short circuit protection continuous, self recovery SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output for 1 minute at 1 mA 1,500 Vdc isolation resistance input to output at 500 Vdc 1,000 MΩ isolation capacitance input to output, 100 kHz / 0.1 V 1,000 pF safety approvals12 UL 60950-1 conducted emissions CISPR22/EN55022, class A (no external circuit); class B (external circuit required, see Figure 3-b) radiated emissions CISPR22/EN55022, class A (no external circuit); class B (external circuit required, see Figure 3-b) ESD IEC/EN61000-4-2, contact ± 4kV, class B radiated immunity IEC/EN61000-4-3, 10V/m, class A EFT/burst IEC/EN61000-4-4, ± 2kV, class B (external circuit required, see Figure 3-a) surge IEC/EN61000-4-5, line-line ± 2kV, class B (external circuit required, see Figure 3-a) conducted immunity IEC/EN61000-4-6, 3 Vr.m.s, class A voltage dips & interruptions IEC/EN61000-4-29, 0%-70%, class B MTBF as per MIL-HDBK-217F, 25°C 1,000,000 hours RoHS yes Note: 12. See specific chassis mount and DIN-rail mount versions with UL approval on page 1. For more information, please visit the product page.

cui.com date 06/21/2018 │ page 4 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER 10 Sec. Max. Wave Soldering Time 4 Sec. Max. Peak Temp. 260°C Max. Time (sec.) Temperature (°C) 250 200 150 100 ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curves -40 85 °C storage temperature -55 125 °C storage humidity non-condensing 5 95 % vibration 10~55 Hz for 30 minutes on each axis 10 G DERATING CURVES SOLDERABILITY13 parameter conditions/description min typ max units hand soldering 1.5 mm from case for 10 seconds 300 °C wave soldering see wave soldering profile 260 °C Note: 13. For DIP models only. Ambient Temperature (°C) Output Load (%) -40 100 04 08 5 Temperature Derating Curve (Natural Convection) 120 12071 All other outputs 3.3, 5, ±5 Vdc outputs For more information, please visit the product page.

cui.com date 06/21/2018 │ page 5 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER units: mm [inch] tolerance: ±0.50[±0.020] pin diameter tolerance: ±0.10[±0.004] MECHANICAL parameter conditions/description min typ max units dimensions DIP Chassis DIN-Rail mm mm mm case material aluminum alloy weight DIP Chassis mount DIN-rail mount g g g MECHANICAL DRAWING (DIP) units: mm [inch] tolerance: ±0.50[±0.020] wire range: 24~12 AWG tightening torque: max 0.4 N*m MECHANICAL DRAWING (CHASSIS) PIN CONNECTIONS PIN Function Single Dual

1 CTRL CTRL

2 GND GND

3 Vin Vin

5 NC 0V

1 GND GND

2 Vin Vin

4 No Pin 0V

6 CTRL CTRL

For more information, please visit the product page.

cui.com date 06/21/2018 │ page 6 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER units: mm [inch] tolerance: ±0.50[±0.020] installed on DIN rail TS35 wire range: 24~12 AWG tightening torque: max 0.4 N*m PIN CONNECTIONS PIN Function Single Dual MECHANICAL DRAWING (DIN-RAIL) For more information, please visit the product page.

cui.com date 06/21/2018 │ page 8 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER PACKAGING (DIP) units: mm Tube Size: 28.6 x 19.8 mm Inner Carton Size: 575 x 135 x 100 mm Outer Carton Size: 600 x 285 x 225 mm Outer Carton QTY: 912 pcs For more information, please visit the product page.

cui.com date 06/21/2018 │ page 9 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER PACKAGING (CHASSIS, DIN-RAIL MOUNT) units: mm Inner Carton Size: 370 x 350 x 115 mm Outer Carton Size: 400 x 365 x 255 mm Outer Carton QTY: 912 pcs For more information, please visit the product page.

date 06/21/2018 │ page 10 of 10CUI Inc │ SERIES: PDQE10 │ DESCRIPTION: DC-DC CONVERTER CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 06/21/2018 The revision history provided is for informational purposes only and is believed to be accurate.

REVISION HISTORY

For more information, please visit the product page.