PDM-P-L-ESS30-30A0-B2-D-K

PDM-P-L ETAL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651

Description

The Power Distribution Module with printed circuit board is a compact power distribution system, designed as a rack made of profiled aluminium sheet for direct mounting, e.g. on the rear wall of a control cabinet. By rotating the flanges, the the module can alternatively be mounted in a 19” rack. Plug-in type thermal-magnetic circuit breakers type 2210 or 3600 or electronic overcurrent circuit breakers ESS20/30 or the electronic circuit protectors ESX10 can be plugged into the terminal block system with a basic height of 3U. 24 or 30 single pole ways are available as a redundant or non-redundant system. The integral group signalling works as series connection of the make contacts or parallel connection of the break contacts. The entire internal circuitry is designed as a printed circuit board. The unprotected pole is also being patched in the distribution. Connections is from the front via terminals. Upon request, decoupling diodes can be added to join two redundant supply feeds. A 1U wiring unit with guiding holes helps to manage the horizontal cable arrangement and makes an additional cable conduct super - fluous. When mounting into a 19” system, which is open from the rear, an additional rear wall is available as a protection against brush contact (see accessories). Technical data Power Distribution Module length: 84 HP (482 mm) height: 3U (133.2 mm) 4U (177.6 mm) with cable management depth: 146 ... 244 mm material: aluminium, passivated Voltage ratings: AC 50 V; DC 65 V; DC 24 V with electronic circuit breakers Supply at A0: screw terminals up to 25 mm², max. 100 A, tightening torque 4 … 4.5 Nm Supply at R0: spring-loaded terminals up to 16 mm², max. 80 A, de-coupling diodes on the rear with heat sink (-D) Load terminals at A0: 30 channels 1-pole protected, spring-loaded terminals up to 2.5 mm², placed as wiring block separated for plus and minus Load terminals at R0: 2 x 12 channels 1-pole protected (version R0), 24 channels 1-pole protected (version R0…-D) spring-loaded terminals up to 2.5 mm², plus and minus arranged in pairs Group signalling: make contacts connected in series (version B1) break contacts connected in parallel (version B2) DC 30V, Imax. = 0.5 A, min. 10 V / 10 mA Grounding of enclosure: via terminal studs M6 on the front tightening torque 4.5 … 5 Nm Operating temperature range: 0 … 50 °C Benefits l Reduced wiring time through printed circuit board design l Space-saving, compact dimensions of 482 (19“) x 133 (3U) x 146 … 244 mm l 30 slots for thermal-magnetic circuit breakers or electronic circuit protectors in a Power Distribution Module l Available as a fully redundant version with 2 x 12 channels l Available with redundant line entry via de-coupling diodes for 24 channels l Flexible start-up and maintenance through circuit breakers to be plugged in later (with the system live) l Convenient spring-loaded terminals (push-in technology) for load and signal terminals l Supply up to 25 mm² or 2 x 16 mm² redundant l Supply up to 100 A or 2 x 80 A redundant l Load terminals up to 2.5 mm² l Load terminals up to 16 A l Group signalling through integral potential-free auxiliary contacts, either make contacts connected in series or break contacts connected in parallel l Signalling available separately per group in the event of redundancy l Optional cable arrangment below the module (replacing an external cable duct)) l Protection against brush contact of all live parts l Mounting in a 19” rack optional or on a mounting plate in the control cabinet by turning the reversible flanges by 180° l Special versions are available upon request Power Distribution Module, redundant and non-redundant version with cable organizers

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Line (In) max. 100 A signalling (31, 32) DC 30 V max. 0.5 A 12 31 11 23 11 22 41 22 24 12 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 F1 F2 F3 F28 F29 F30 28+ 28- 29+ 29- 30+ 30- In- In+ load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 25 mm², max. 100 A Load (1 ... 30), max. 16 A Schematic diagrams for non-redundant version (A0) with 2210 (or 3600/3900), signalling as series connection (B1) Order numbering code Type No. PDM-P-L Power Distribution Module with pcb, positive pole protected (3U) Suitable types 2210 mechanical circuit breaker 2210 or 3600 or 3900 ESX10 electronic circuit protector ESX10 ESS30 electronic circuit breaker ESS30 (or ESS20) Version, number of load circuits 30A0 30 channels non-redundant, 1 line entry 24R0 12 + 12 units, redundant, 2 line entries Signalling B1 group signalling, series connection of make contacts B2 group signalling, parallel connection of break contacts Options D decoupling diodes (only with 24R0) K with cable organizers (1U additionally) Sxxxx special version upon customer’s request PDM-P-L-ESS30-24R0-B1 - D - K ordering example Preferred types for 2210 circuit breaker type PDM-P-L-2210-30A0-B1-K Non-redundant, group signalling make contact PDM-P-L-2210-30A0-B2-K Non-redundant, group signalling break contact contact PDM-P-L-2210-24R0-B1-D-K Redundant line entry, de-coupling diodes, group signalling make contacts for ESS30 circuit breaker type PDM-P-L-ESS30-30A0-B1 Non-redundant, group signalling make contact PDM-P-L-ESS30-24R0-B1-K Redundant line entry, de-coupling diodes, group signalling make contacts

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 Line (In) max. 100 A signalling (31, 32) DC 30 V max. 0.5 A 12 31 11 23 11 22 41 22 24 12 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 F1 F2 F3 F28 F29 F30 28+ 28- 29+ 29- 30+ 30- In- In+ load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 25 mm², max. 100 A Load (1 ... 30), max. 16 A Line (In) max. 100 A signalling (31, 32) DC 30 V max. 0.5 A Line (+) ESS20 ESS20 Gnd SC Load (+) Si SO Line (+) Gnd SC Load (+) Si SO ESS20 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO F1 F2 F3 F28 F29 F30 28+ 28- 29+ 29- 30+ 30- In- In+ load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 25 mm², max. 100 A Load (1 ... 30), max. 16 A Schematic diagrams for non-redundant version (A0) with 2210 (or 3600/3900), signalling as parallel connection connection (B2) Schematic diagrams for non-redundant version (A0) with ESS20 -003 (or ESS30 -003/ESX10-103), signalling as series connection (B1)

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Line (In) max. 100 A signalling (31, 32) DC 30 V max. 0.5 A Line (+) ESS20 ESS20 Gnd SC Load (+) Si SO Line (+) Gnd SC Load (+) Si SO ESS20 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO ESX10 Line (+) Gnd SC Load (+) Si SO F1 F2 F3 F28 F29 F30 28+ 28- 29+ 29- 30+ 30- In- In+ load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 25 mm², max. 100 A Load (1 ... 30), max. 16 A Line (InA) max. 80 A signalling (SiS) DC 30 V max. 0.5 A F1 F2 F3 F22 F23 F24 InB- InB+ Line (InB) max. 80 A SiS SiS InA- InA+ 22+ 22- 23+ 23- 24+ 24- load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 16 mm², max. 80 A Load (1 ... 24), max. 16 A 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 Schematic diagrams for non-redundant version (A0) with ESS20 -003 or ESS30 -003/ESX10-103), signalling as parallel connection connection (B2) Schematic diagrams for redundant version de-coupling diodes with (R0…-D) with 2210, signalling as series connection (B1)

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 Line (InA) max. 80 A signalling (SiPA) DC 30 V max. 0.5 A A1 A2 A12 B1 B2 B3 InB- InB+ Line (InB) max. 80 A signalling (SiPB) DC 30 V max. 0.5 A SiPA SiPA SiPB SiPB InA- InA+ A1+ A1- A2+ A2- A12+ A12- B1+ B1- B2+ B2- B12+ B12- load and aux. contact terminals: spring-loaded terminals up to 2.5 mm² supply (line): screw terminals 16 mm², max. 80 A Line (+) ESS20 Gnd SC Load (+) Si SO Line (+) ESS20 Gnd SC Load (+) Si SO Line (+) ESS20 Gnd SC Load (+) Si SO Line (+) ESX10 Gnd SC Load (+) Si SO Line (+) ESX10 Gnd SC Load (+) Si SO Line (+) ESX10 Gnd SC Load (+) Si SO Schematic diagrams for redundant version (R0) with ESS20-003, signalling as parallel connection (B2)

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Front view 431,5 465 482,6 populated with ESS20E SS30E SX10 3600 2210 Non-redundant version, for 19" rack installation, accommodating various circuit breaker types flanges mounted suitable for ESS20 Part number: PDM-P-L-xxxx-30A0-By-K (xxxx = circuit breaker type, y = signalling) flanges mounted suitable for 2210 etc. accessories: rear wall X22356901Top view side view load terminals Plus 1-30 signalling 31-32 load terminals Plus 1-24, 25-48 supply line 182 167 3 HE1 HE Dimensions

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 Front view ESS20 ESS30 ESX10 3600 2210 non-redundant version, rear wall mounting on mounting plate in control cabinet, accommodating various circuit breaker types Part number: PDM-P-L-xxxx-30A0-By-K (xxxx = circuit breaker type, y = signalling) redundant version, rear wall mounting on mounting plate in control cabinet, fitted with ESS20 Part number: PDM-P-L-xxxx-24R0-By-K (without de-coupling diodes, xxxx = circuit breaker type, y = signalling) PDM-P-L-xxxx-24R0-By-D-K (with de-coupling diodes, xxxx = circuit breaker type, y = signalling) Top view side view load terminals A signalling A load terminals B signalling Bsupply line A supply line B 146 148 153 138 178 Dimensions

www.e-t-a.de 1651 Front view ESS20 ESS20 redundant version with de-coupling diodes, rear wall mounting on mounting plate in control cabinet, fitted with ESS20 redundant version, rear wall mounting on mounting plate in control cabinet, fitted with ESS20 Part number: PDM-P-L-xxxx-24R0-By-D-K (with de-coupling diodes, xxxx = circuit breaker type, y = signalling) Top view side view load outputs 1-12 load outputs 13-24 signallingsupply line A supply line B 244 Dimensions

www.e-t-a.de Power Distribution Modules for 2210/3600/ESS20/ESS30/ESX10 1651 All dimensions without tolerances are for reference only. E-T-A reserves the right to change specifications at any time in the interest of improved design, performance and cost effective- ness, Dimensions are subject to change without notice. Please enquire for the latest dimen- sional drawing with tolerances if required. without notice is reserved. Amendments, errors and omissions excepted. Ordering codes of the products may differ from their marking. Rear wall as protection against brush contact for later installation when mounted in a 19" rack, non-redundant version PDM-P-L-xxxx-30A0-By-K Set with 4 mounting screws Part number: X223 569 01 Accessories blade terminals DIN 46244-A 6.3-0.8 7010.3 2.36 12.3 terminals 13+14 bridged Signalbrücke Signal loop Germany www.e-t-a.de Signalbrücke Signal loop xxxx SB-S11-P1-01-1-1A Jumper SB-S11-P1-01-1-1A .484 .406 2.76 top view AC 240 V / DC 65 V, 1 A