DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. SMT Data Line EMI Filters – PDLF Document 491-1 Document 491-1 Revised 04/01/14 Current Inductance Part max2 min3 DCR max number 1 Lines (mA) (µH) (mOhms) PDLF4000L_ 4 100 5 250 PDLF4500L_ 4 500 5 200 PDLF3000L_ 3 100 5 250 PDLF3500L_ 3 500 5 200 PDLF2000L_ 2 100 5 250 PDLF2500L_ 2 500 5 200 1. When ordering, please specify packaging code: PDLF4500LC C = 7″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). D = 13″ machine ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40°C to +85°C. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit D303 contains four each of all values plus DLF and CCDLF filters Core material Ferrite Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 183 – 201 mg Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 500/7″reel; 2000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf

  • Available in 4, 3 and 2-line versions
  • See our CCDLF series for 10 and 8-line EMI filters
  • Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation
  • DC current capacity of 500 or 100 mA.
  • Excellent electrical isolation (300 Vrms)

Surface Mount Data Line EMI Filters US UK Taiwan China Singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 491-2 0.138 ±0.008 3,50 ±0,20 0.217 ±0.006 5,50 ±0,15 0.317 ±0.012 8,05 ±0,30 0.020 0,50 0.012 0,305 0.098 2,50 0.050 1,27 cen 0.0395 1,00 Notch indicates pin 1 0.236 6,00 Dimensions are typical prior to applying solder 0.050 1,27 cen 0.060 1,52 0.030 0,76 Recommended Land Pattern 0.200 5,08 PDLF4000, 4500 PDLF3000, 3500 PDLF2000, 2500 4 5 0.307 ±0.008 7,80 ±0,20 0.007/0,18 PDLF XXXXL Dimensions are in inches mm Document 491-2 Revised 04/01/14 0.1 11 0 100 1000 Frequency (MHz) Atten uation (dB) Common Mode Differential Mode * Measured on HP 8753D network analyzer. Ref: 50 Ohms. Typical Response* 0.1 1.0 100 1000 10,000 Impedance (Ohms) 1.0 10 1000100 Differential Mode Common Mode Frequency (MHz) Typical Impedance