PDL03-12S09

PDL03_14 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1 www.PDUKE.com 2014/04/30 PDL03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3 Watts FEATURES APPLICATIONS

• NO MINIMUM LOAD REQUIRED
• UP TO 3000VDC INPUT TO OUTPUT ISOLATION
• SMALL SIZE AND LOW PROFILE ：： ：： 0.86 X 0.36 X 0.44 INCH
• LOW OUTPUT RIPPLE AND NOISE
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• DISTRIBUTED POWER ARCHITECTURES
• SEMICONDUCTOR EQUIPMENT 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 ℃ otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load Model Number VDC VDC mA mA % µF PDL03-05S3P3 4.5 ~ 9 3.3 700 45 75 3300 PDL03-05S05 4.5 ~ 9 5 600 45 79 1680 PDL03-05S09 4.5 ~ 9 9 333 55 80 1000 PDL03-05S12 4.5 ~ 9 12 250 55 81 820 PDL03-05S15 4.5 ~ 9 15 200 55 82 680 PDL03-05D05 4.5 ~ 9 ±5 ±300 55 78 ±1000 PDL03-05D12 4.5 ~ 9 ±12 ±125 60 81 ±470 PDL03-05D15 4.5 ~ 9 ±15 ±100 60 81 ±330 PDL03-12S3P3 9 ~ 18 3.3 700 25 77 3300 PDL03-12S05 9 ~ 18 5 600 25 81 1680 PDL03-12S09 9 ~ 18 9 333 30 80 1000 PDL03-12S12 9 ~ 18 12 250 30 83 820 PDL03-12S15 9 ~ 18 15 200 30 83 680 PDL03-12D05 9 ~ 18 ±5 ±300 30 82 ±1000 PDL03-12D12 9 ~ 18 ±12 ±125 30 83 ±470 PDL03-12D15 9 ~ 18 ±15 ±100 30 83 ±330 PDL03-24S3P3 18 ~ 36 3.3 700 16 76 3300 PDL03-24S05 18 ~ 36 5 600 16 82 1680 PDL03-24S09 18 ~ 36 9 333 17 82 1000 PDL03-24S12 18 ~ 36 12 250 18 83 820 PDL03-24S15 18 ~ 36 15 200 18 84 680 PDL03-24D05 18 ~ 36 ±5 ±300 17 80 ±1000 PDL03-24D12 18 ~ 36 ±12 ±125 18 83 ±470 PDL03-24D15 18 ~ 36 ±15 ±100 18 85 ±330 PDL03-48S3P3 36 ~ 75 3.3 700 10 74 3300 PDL03-48S05 36 ~ 75 5 600 10 79 1680 PDL03-48S09 36 ~ 75 9 333 11 80 1000 PDL03-48S12 36 ~ 75 12 250 12 81 820 PDL03-48S15 36 ~ 75 15 200 12 82 680 PDL03-48D05 36 ~ 75 ±5 ±300 12 79 ±1000 PDL03-48D12 36 ~ 75 ±12 ±125 12 82 ±470 PDL03-48D15 36 ~ 75 ±15 ±100 12 83 ±330

2 www.PDUKE.com 2014/04/30 PART NUMBER STRUCTURE PDL03 - 48 S 05 H Series Name Input Output Output Isolation Voltage Quantity Voltage Option (VDC) (VDC) 05: 4.5~9 S: Single 3P3: 3.3 /filetall/filetall /filetall/filetall: Standard type 12: 9~18 05: 5 1600VDC isolation 24: 18~16 09: 9 H: 3000VDC isolation 48: 36~75 12:12 15: 15 D: Dual 05:± 5 12: ± 12 15: ± 15 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 4.5 VDC Start up time Constant resistive load Power up Remote ON/OFF 30 ms Input surge voltage 100 ms, max. 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 100 VDC Input reflected ripple current 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 400 150 380 170 mAp-p Input filter (1) Capacitor type DC-DC ON Open or high impedance Remote ON/OFF Ctrl pin applied current via 1k Ω DC-DC OFF 2 3 4 mA Remote off input current 2.5 mA Application circuit DC-DC ON DC-DC OFF OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % Single -1.0 +1.0 No Load to Full Load Dual -1.0 +1.0 % Load regulation 5% Load to 100% Full Load Single -0.5 +0.5 % Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Ripple and noise 20MHz bandwidth 50 mVp-p Temperature coefficient -0.02 +0.02 %/ ℃ Transient response recovery time 25% load step change 500 µs Short circuit protection Continuous, automatics recovery

3 www.PDUKE.com 2014/04/30 GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Input to Output Standard Type 1600 Suffix ”H” 3000 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance Standard Type 200 Suffix ”H” 40 pF Switching frequency Full load to minimum load 100 kHz Safety approvals UL60950-1 EN60950-1 IEC60950-1 Case material Non-conductive black plastic Base material None Potting material Silicone (UL94 V-0) Weight 4.8g (0.17oz) MTBF MIL-HDBK-217F 4.871 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature Without derating With derating -40 +71 +71 +100 ℃ Storage temperature range -55 +125 ℃ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC SPECIFICATIONS Parameter Conditions Level EMI (2) EN55022 Class A ， Class B ESD EN61000-4-2 Air ± 8kV and Contact ± 6kV Perf. C riteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (3) EN61000-4-4 ± 2kV Perf. Criteria A Surge (3) EN61000-4-5 ±1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. It will not damage the device without installing external input capacitors. It’s helpful to reduce input reflected ripple current if external input capacitors are installed. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE PDL03-48S05 Derating Curve PDL03-48S05 Efficiency v s. Input Voltage PDL03-48S05 Efficiency vs. Output Load

4 www.PDUKE.com 2014/04/30 MECHANICAL DRAWING PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin

3 Ctrl Ctrl

8 NC -Vout

*NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)