DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.pduke.com 2013/5/3 PDL03W SERIES

3 WATTS DC-DC CONVERTER

4.5 ~ 18VDC 9 ~ 36VDC 18 ~ 75VDC Input filter Capacitor type Input surge voltage 12VDC input 24VDC input 48VDC input 36VDC 100ms, m ax. 50VDC 100ms , max. 100VDC 100ms, max . Input reflected ripple current(Note 6) 12VDC input 24VDC input 48VDC input 25mAp- p 10mAp-p 8mAp-p Start up time Nominal input and constant resistive load Power up Remote ON/OFF 30ms 30ms Remote ON/OFF DC-DC ON DC-DC OFF Open or high impedance Control pin applied current 2 ~ 4mA max(via 1k Ω ) Remote off state input current Nominal input 2.5mA, max. Application circuit ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +71ºC (without derating) +71ºC ~ +100ºC (with derating) Storage temperature range -55ºC ~ +125ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI(Note6) EN55022 Class A, Class B ESD EN61000-4-2 Air Contact ± 8kV ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient(Note 7) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation Single Dual No Load to Full load 5% load to 100% load No Load to Full Load ± 1% ± 0.5% ± 1% Cross regulation (Dual) Asymmetrical load 25%/100% FL ±5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ± 0.02% / ºC, max. Transient response recovery time 25% load step change 250us Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Standard Suffix “H” 1600VDC, min. 1minute 3000VDC, min. 1minute Isolation resistance 500VDC 109ohms, min. Isolation capacitance Standard Suffix “H” 200pF, max. 40pF, max. Switching frequency Full load to minimum load 100kHz, min. Design meet safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-conductive black plastic Base material None Potting material Silicon (UL94-V0) Dimensions 0.86 X 0.36 X 0.44 Inch (21.8 X 9.2 X 11.1 mm) Weight 4.8g (0.17oz) MTBF(Note 1) Bellcore TR-NWT-000332 MIL-HDBK-217F 3.963 x 10 6 hrs 1.707 x 10 6 hrs T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted

APPLICATIONS

FEATURES

  • 3 WATTS MAXIMUM OUTPUT POWER
  • OUTPUT CURRENT UP TO 700mA
  • SIP PACKAGE, 0.86 x 0.36x 0.44 INCH
  • HIGH EFFICIENCY UP TO 82%
  • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
  • SWITCHING FREQENCY (100kHz, min)
  • LOW RIPPLE & NOISE
  • UL94-V0 CASE POTTING MATERIALS
  • INPUT TO OUTPUT ISOLATION: 1600VDC
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • EXTERNAL ON/OFF CONTROL
  • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
  • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU O PTIONS 3000VDC ISOLATION

DESCRIPTION

The PDL03W series offer 3 watts of output power from a 0.86 x 0.36 x 0.44 inch package without derating to 71ºC. The PDL03W series have 4:1 ultra wide input voltage of 4.5~18 9~36 and 18~75VDC and features 1600VDC of isolation, short-circuit protection.

Page 2 of 3 www.pduke.com 2013/5/3 PDL03W SERIES Voltage Min. load Full load Output (2) Ripple & Noise No load(3) Input Current Eff (4) (%) Capacitor (5) Load max PDL03-12S3P3W 4.5 ~ 18 VDC 3.3 VDC 0mA 700mA 30 mVp-p 35 mA 74 3300uF PDL03-12S05W 4.5 ~ 18 VDC 5 VDC 0mA 600mA 30 mVp-p 40 mA 78 1680uF PDL03-12S09W 4.5 ~ 18 VDC 9 VDC 0mA 333mA 30 mVp-p 40 mA 79 1000uF PDL03-12S12W 4.5 ~ 18 VDC 12 VDC 0mA 250mA 30 mVp-p 40 mA 80 820uF PDL03-12S15W 4.5 ~ 18 VDC 15 VDC 0mA 200mA 30 mVp-p 40 mA 80 680uF PDL03-12D05W 4.5 ~ 18 VDC ±5 VDC 0mA ±300mA 30 mVp-p 40 mA 80 ±1000uF PDL03-12D12W 4.5 ~ 18 VDC ±12 VDC 0mA ±125mA 30 mVp-p 40 mA 80 ±470uF PDL03-12D15W 4.5 ~ 18 VDC ±15 VDC 0mA ±100mA 30 mVp-p 40 mA 80 ±330uF PDL03-24S3P3W 9 ~ 36 VDC 3.3 VDC 0mA 700mA 30 mVp-p 20mA 75 3300uF PDL03-24S05W 9 ~ 36 VDC 5 VDC 0mA 600mA 30 mVp-p 20mA 80 1680uF PDL03-24S09W 9 ~ 36 VDC 9 VDC 0mA 333mA 30 mVp-p 19mA 80 1000uF PDL03-24S12W 9 ~ 36 VDC 12 VDC 0mA 250mA 30 mVp-p 20mA 82 820uF PDL03-24S15W 9 ~ 36 VDC 15 VDC 0mA 200mA 30 mVp-p 19mA 82 680uF PDL03-24D05W 9 ~ 36 VDC ±5 VDC 0mA ±300mA 30 mVp-p 25mA 79 ±1000uF PDL03-24D12W 9 ~ 36 VDC ±12 VDC 0mA ±125mA 30 mVp-p 25mA 81 ±470uF PDL03-24D15W 9 ~ 36 VDC ±15 VDC 0mA ±100mA 30 mVp-p 25mA 81 ±330uF PDL03-48S3P3W 18 ~ 75 VDC 3.3 VDC 0mA 700mA 30 mVp-p 12mA 74 3300uF PDL03-48S05W 18 ~ 75 VDC 5 VDC 0mA 600mA 30 mVp-p 12mA 80 1680uF PDL03-48S09W 18 ~ 75 VDC 9 VDC 0mA 333mA 30 mVp-p 13mA 80 1000uF PDL03-48S12W 18 ~ 75 VDC 12 VDC 0mA 250mA 30 mVp-p 14mA 81 820uF PDL03-48S15W 18 ~ 75 VDC 15 VDC 0mA 200mA 30 mVp-p 14mA 81 680uF PDL03-48D05W 18 ~ 75 VDC ±5 VDC 0mA ±300mA 30 mVp-p 14mA 79 ±1000uF PDL03-48D12W 18 ~ 75 VDC ±12 VDC 0mA ±125mA 30 mVp-p 14mA 81 ±470uF PDL03-48D15W 18 ~ 75 VDC ±15 VDC 0mA ±100mA 30 mVp-p 14mA 81 ±330uF PDL03-24S05W Derating Curve 100 120 - 4 0 - 2 0 0 2 0 4 0 6 0 8 0 1 0 0 AMBIENT TEMPERATURE(℃ ) O U T P U T P O W E R ( % ) 71 PDL03-24S05W Efficiency VS Input Voltage 6 0% 6 5% 7 0% 7 5% 8 0% 8 5% 9 1 2 1 5 1 8 2 1 24 2 7 3 0 3 3 3 6 INPUT VOLTAGE (V) E F F IC IE N C Y (% ) PDL03-24S05W Efficiency VS Output Load 1 0 2 0 3 0 4 0 5 0 60 7 0 8 0 90 1 0 0 OUTPUT LOAD (% of Full Load) E F F IC IE N C Y (% ) Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment) 2. Typical value at nominal input and full load. (20MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. The PDL03W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 100µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used.

Page 3 of 3 www.pduke.com 2013/5/3 PDL03W SERIES MECHANICAL DRAWING：： ：： PIN CONNECTION PIN SINGLE DUAL 1 -INPUT -INPUT 2 +INPUT +INPUT

3 CTRL CTRL

8 NC -OUTPUT

*NC pin for standard. **No pin for 3kV isolation. (P/N suffix ”H”) 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1)