PDL03-05S3P3 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/08/19 INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Capacitor type Input surge voltage 100mS max 5V input 12V input 24V input 48V input 15VDC 36VDC 50VDC 100VDC Input reflected ripple current 5V input 12V input 24V input 48V input 400mAp-p, max. 150mAp-p, max. 380mAp-p, max. 170mAp-p, max. Start up time Nominal Vin and constant resistive load Power up Remote ON/OFF 30mS, typ. 30mS, typ. Remote ON/OFF DC-DC ON DC-DC OFF Open or high impedance Control pin applied current 2 ~ 4mA max(via 1K Ω) Remote off state input current Nominal Vin 2.5mA, max. Application circuit +Input -Input 3mA current Source Ctrl 1KΩ DC-DC ON +Input -Input 3mA current Source Ctrl 1KΩ DC-DC OFF ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +71ºC (without derating) +71ºC ~ +100ºC (with derating) Storage temperature range -55ºC to +105ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 6) EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2KV Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1KV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy Full load and nominal Vin ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation Single Dual No load to Full load 5% load to 100% load No Load to Full Load ± 1% ± 0.5% ± 1% Cross regulation (Dual) Asymmetrical load 25%/100% FL ±5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 500μS, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Standard Suffix ”H” 1600VDC, min. 3000VDC, min. Isolation resistance 109ohms, min. Isolation capacitance Standard Suffix ”H” 200pF, max. 30pF, max. Switching frequency Full load to minimum load 100KHz, min. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-c onductive black plastic Base material None Potting material Silicon (UL94-V0) Dimensions 0.86 X 0.36 X 0.44 Inch (21.8 X 9.1 X 11.2 mm) Weight 4.8g (0.17oz) MTBF(Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 4.386 x 10 hrs 2.401 x 10 hrs TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 3 WATTS MAXIMUM OUTPUT POWER
  • OUTPUT CURRENT UP TO 700mA
  • SIP PACKAGE, 0.86 x 0.36x 0.44 INCH
  • HIGH EFFICIENCY UP TO 85%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • SWITCHING FREQUENCY (100KHz, MIN)
  • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
  • LOW RIPPLE & NOISE
  • UL94-V0 CASE POTTING MATERIALS
  • INPUT TO OUTPUT ISOLATION UP TO 1.6KVDC
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • EXTERNAL ON/OFF CONTROL
  • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
  • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS 3KV ISOLATION

DESCRIPTION

The PDL03 series offer 3 watts of output power from a 0.86 x 0.36 x 0.44 inch package without derating to 71ºC. The PDL03 series have 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 1600VDC of isolation, short-circuit protection.

APPLICATIONS

Page 2 of 3 Issued Date：2008/08/19 Output Current Input Current Model Number Input Range Output Voltage Min. load Full load Output (4) Ripple & Noise No load (3) Full load (2) Eff (4) (%) Capacitor (5) Load max PDL03-05S3P3 4.5 – 9 VDC 3.3 VDC 0mA 700mA 50 mVp-p 70mA 670mA 73 1760μF PDL03-05S05 4.5 – 9 VDC 5 VDC 0mA 600mA 50 mVp-p 70mA 800mA 79 1000 μF PDL03-05S09 4.5 – 9 VDC 9 VDC 0mA 333mA 50 mVp-p 70mA 789mA 80 470μF PDL03-05S12 4.5 – 9 VDC 12 VDC 0mA 250mA 50 mVp-p 75mA 779mA 81 170 μF PDL03-05S15 4.5 – 9 VDC 15 VDC 0mA 200mA 50 mVp-p 75mA 779mA 81 110μF PDL03-05D05 4.5 – 9 VDC ±5 VDC 0mA ±300mA 50 mVp-p 70mA 810mA 78 ±470 μF PDL03-05D12 4.5 – 9 VDC ±12 VDC 0mA ±125mA 50 mVp-p 85mA 789mA 80 ±100μF PDL03-05D15 4.5 – 9 VDC ±15 VDC 0mA ±100mA 50 mVp-p 80mA 779mA 81 ±47 μF PDL03-12S3P3 9 – 18 VDC 3.3 VDC 0mA 700mA 50 mVp-p 35mA 275mA 74 1760μF PDL03-12S05 9 – 18 VDC 5 VDC 0mA 600mA 50 mVp-p 35mA 333mA 79 1000μF PDL03-12S09 9 – 18 VDC 9 VDC 0mA 333mA 50 mVp-p 40mA 329mA 80 470μF PDL03-12S12 9 – 18 VDC 12 VDC 0mA 250mA 50 mVp-p 45mA 325mA 81 170μF PDL03-12S15 9 – 18 VDC 15 VDC 0mA 200mA 50 mVp-p 45mA 325mA 82 110μF PDL03-12D05 9 – 18 VDC ±5 VDC 0mA ±300mA 50 mVp-p 45mA 329mA 82 ±470μF PDL03-12D12 9 – 18 VDC ±12 VDC 0mA ±125mA 50 mVp-p 45mA 320mA 83 ±100μF PDL03-12D15 9 – 18 VDC ±15 VDC 0mA ±100mA 50 mVp-p 45mA 316mA 83 ±47μF PDL03-24S3P3 18 – 36 VDC 3.3 VDC 0mA 700mA 50 mVp-p 16mA 138mA 74 1760μF PDL03-24S05 18 – 36 VDC 5 VDC 0mA 600mA 50 mVp-p 16mA 162mA 81 1000 μF PDL03-24S09 18 – 36 VDC 9 VDC 0mA 333mA 50 mVp-p 17mA 160mA 82 470μF PDL03-24S12 18 – 36 VDC 12 VDC 0mA 250mA 50 mVp-p 18mA 160mA 81 170 μF PDL03-24S15 18 – 36 VDC 15 VDC 0mA 200mA 50 mVp-p 18mA 158mA 82 110μF PDL03-24D05 18 – 36 VDC ±5 VDC 0mA ±300mA 50 mVp-p 17mA 164mA 80 ±470 μF PDL03-24D12 18 – 36 VDC ±12 VDC 0mA ±125mA 50 mVp-p 18mA 158mA 83 ±100μF PDL03-24D15 18 – 36 VDC ±15 VDC 0mA ±100mA 50 mVp-p 18mA 154mA 85 ±47 μF PDL03-48S3P3 36 – 75 VDC 3.3 VDC 0mA 700mA 50 mVp-p 10mA 69mA 74 1760μF PDL03-48S05 36 – 75 VDC 5 VDC 0mA 600mA 50 mVp-p 10mA 83mA 79 1000μF PDL03-48S09 36 – 75 VDC 9 VDC 0mA 333mA 50 mVp-p 11mA 82mA 80 470μF PDL03-48S12 36 – 75 VDC 12 VDC 0mA 250mA 50 mVp-p 12mA 82mA 80 170μF PDL03-48S15 36 – 75 VDC 15 VDC 0mA 200mA 50 mVp-p 12mA 81mA 81 110μF PDL03-48D05 36 – 75 VDC ±5 VDC 0mA ±300mA 50 mVp-p 12mA 83mA 79 ±470 μF PDL03-48D12 36 – 75 VDC ±12 VDC 0mA ±125mA 50 mVp-p 12mA 80mA 82 ±100μF PDL03-48D15 36 – 75 VDC ±15 VDC 0mA ±100mA 50 mVp-p 12mA 79mA 83 ±47 μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment) 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The PDL03 series meet EN55022 Class A with external L-C filter before the input pins to the converter. (Connect networks following Class B figure.) Recommend: 05 Vin : C1=2.2 μF/10V 1206 MLCC. L1=3.3 μH 0504 SMD Inductor P/N:PMT-044. 12 Vin : C1=0.68μF/25V 1206 MLCC. L1=10 μH 0504 SMD Inductor P/N:PMT-047. 24 Vin : C1=4.7μF/50V 1210 MLCC. L1=10 μH 0504 SMD Inductor P/N:PMT-047. 48 Vin : C1=0.47μF/100V 1812 MLCC. L1=56 μH 0504 SMD Inductor P/N:PMT-045. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. PDL03-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) PDL03-48S05 Derating Curve 100 120 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE(℃) OUTPUT POWER (%) 71

Page 3 of 3 Issued Date：2008/08/19 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 L1 PDL03-05xxx 10μF/1 0 V

1206 MLCC

3.3μH 0504 SMD Inductor PMT-044 PDL03-12xxx 2.2μF/2 5 V 18μH 0504 SMD Inductor PMT-046 PDL03-24xxx 6.8μF/5 0 V

1812 MLCC

18μH 0504 SMD Inductor PMT-046 PDL03-48xxx 2.2μF/100V 56μH 0504 SMD Inductor PMT-045 Recommended EN55022 Class B Filter Circuit Layout .0.01(0.3) Rectangular pin 0.08(2.0) 0.36(9.1) 0.13(3.3) BOTTOM VIEW 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 0.16(4.1) 0.02(0.5) 0.44 (11.2) 1 2 3 5 6 7 8 0.100(2.54) 0.86(21.8) FRONT VIEW 0.002(0.50) 0.700(17.78) PIN CONNECTION PIN SINGLE 1 - INPUT 2 + INPUT

3 CTRL

5 NC*/No Pin*

  • INPUT + INPUT CTRL NC*/No Pin* + OUTPUT COM - OUTPUT *No pin for 3KV isolation. (P/N suffix ”H”) *NC pin for standard.