PDL02-12D15

PDL02-05S33 P-DUKE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/08/19 OUTPUT SPECIFICATIONS Output power 2 Watts max Voltage accuracy Full load and nominal Vin ± 1% Minimum load (Note 6) See Table Line regulation LL to HL at Full Load ± 0.5% Load regulation Min.load to Full load Single 3.3Vout O t h e r s Dual ± 0.85% ± 0.75% ± 1% Cross regulation (Dual) Asymmetrical load 25%/100% FL ±5% Ripple and noise 20MHz bandwidth See table Temperature coefficient ±0.02% / ºC, max. Transient response recovery time 25% load step change 500μS, typ. Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Isolation voltage 1000VDC, min. Isolation resistance 109ohms, min. Isolation capacitance 200pF, max. Switching frequency Full load to minimum load 100KHz, min. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Non-c onductive black plastic Base material None Potting material Silicon (UL94-V0) Dimensions 0.86 X 0.36 X 0.44 Inch (21.8 X 9.1 X 11.2 mm) Weight 4.8g (0.17oz) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 5.107 x 10 hrs 2.886 x 10 hrs INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Capacitor type Input surge voltage 100mS max 5V input 12V input 24V input 48V input 15VDC 36VDC 50VDC 100VDC Input reflected ripple current There is an external capacitor at input (Note 7) 5V input (10μF/MLCC) 12V input (10μF/MLCC) 24V input (2.2μF/MLCC) 48V input (2.2μF/MLCC) 400mAp-p, max. 150mAp-p, max. 380mAp-p, max. 170mAp-p, max. Start up time Nominal Vin and constant resistive load Power up Remote ON/OFF 1mS, typ. 1mS, typ. Remote ON/OFF DC-DC ON DC-DC OFF Open or high impedance Control pin applied current 4 ~ 8mA max(via 1K Ω) Remote off state input current Nominal Vin 2.5 mA, max. Application circuit ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC to +85ºC(with derating) Storage temperature range -55ºC to +105ºC Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 Class A ESD EN61000-4-2 Air Contact ± 8KV ± 6KV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 9) EN61000-4-4 ± 2KV Perf. Criteria B Surge (Note 9) EN61000-4-5 ± 1KV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A

APPLICATIONS

FEATURES

• 2 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 500mA
• SIP PACKAGE, 0.86 x 0.36x 0.44 INCH
• HIGH EFFICIENCY UP TO 81%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SWITCHING FREQUENCY (100KHz, MIN)
• SINGLE AND DUAL OUTPUT
• NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
• LOW RIPPLE & NOISE
• UL94-V0 CASE POTTING MATERIALS
• INPUT TO OUTPUT ISOLATION UP TO 1KVDC
• CONTINUOUS SHORT CIRCUIT PROTECTION
• EXTERNAL ON/OFF CONTROL
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC

DESCRIPTION

The PDL02 series offer 2 watts of output power from a 21.8 x 9.1 x 11.2 mm package without derating to 85ºC and without external input/output capacitors. The PDL02 series have 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 000VDC of isolation, short-circuit protection. TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted +Input -Input 6mA current Source Ctrl 1KΩ DC-DC ON +Input -Input 6mA current Source Ctrl 1KΩ DC-DC OFF

Page 2 of 3 Issued Date：2008/08/19 Output Current Input Current Model Number Input Range Output Voltage Min Load Full Load Output (4) Ripple & Noise No load(3) Full load(2) Eff (4) (%) Capacitor(5) Load max PDL02-05S33 4.5 – 9 VDC 3.3 VDC 50mA 500mA 50mVp-p 60mA 540mA 65 2200μF PDL02-05S05 4.5 – 9 VDC 5 VDC 40mA 400mA 50mVp-p 55mA 615mA 69 1000 μF PDL02-05S09 4.5 – 9 VDC 9 VDC 22mA 222mA 50mVp-p 55mA 596mA 71 470μF PDL02-05S12 4.5 – 9 VDC 12 VDC 17mA 167mA 50mVp-p 75mA 588mA 72 170 μF PDL02-05S15 4.5 – 9 VDC 15 VDC 13mA 134mA 50mVp-p 40mA 582mA 73 110μF PDL02-05D05 4.5 – 9 VDC ±5 VDC ±20mA ±200mA 50mVp-p 75mA 645mA 77 ±470 μF PDL02-05D12 4.5 – 9 VDC ±12 VDC ±8mA ±83mA 50mVp-p 75mA 595mA 78 ±100μF PDL02-05D15 4.5 – 9 VDC ±15 VDC ±7mA ±67mA 50mVp-p 90mA 598mA 78 ±47 μF PDL02-12S33 9 – 18 VDC 3.3 VDC 50mA 500mA 50mVp-p 20mA 202mA 72 2200μF PDL02-12S05 9 – 18 VDC 5 VDC 40mA 400mA 50mVp-p 25mA 234mA 75 1000μF PDL02-12S09 9 – 18 VDC 9 VDC 22mA 222mA 50mVp-p 25mA 222mA 79 470μF PDL02-12S12 9 – 18 VDC 12 VDC 17mA 167mA 50mVp-p 30mA 219mA 80 170μF PDL02-12S15 9 – 18 VDC 15 VDC 13mA 134mA 50mVp-p 30mA 220mA 80 110μF PDL02-12D05 9 – 18 VDC ±5 VDC ±20mA ±200mA 50mVp-p 50mA 242mA 73 ±470μF PDL02-12D12 9 – 18 VDC ±12 VDC ±8mA ±83mA 50mVp-p 40mA 224mA 78 ±100μF PDL02-12D15 9 – 18 VDC ±15 VDC ±7mA ±67mA 50mVp-p 40mA 226mA 78 ±47μF PDL02-24S33 18 – 36 VDC 3.3 VDC 50mA 500mA 50mVp-p 10mA 102mA 71 2200μF PDL02-24S05 18 – 36 VDC 5 VDC 40mA 400mA 50mVp-p 10mA 115mA 76 1000 μF PDL02-24S09 18 – 36 VDC 9 VDC 22mA 222mA 50mVp-p 15mA 109mA 80 470μF PDL02-24S12 18 – 36 VDC 12 VDC 17mA 167mA 50mVp-p 15mA 109mA 80 170 μF PDL02-24S15 18 – 36 VDC 15 VDC 13mA 134mA 50mVp-p 15mA 108mA 81 110μF PDL02-24D05 18 – 36 VDC ±5 VDC ±20mA ±200mA 50mVp-p 15mA 117mA 75 ±470 μF PDL02-24D12 18 – 36 VDC ±12 VDC ±8mA ±83mA 50mVp-p 20mA 112mA 78 ±100μF PDL02-24D15 18 – 36 VDC ±15 VDC ±7mA ±67mA 50mVp-p 20mA 110mA 80 ±47 μF PDL02-48S33 36 – 75 VDC 3.3 VDC 50mA 500mA 50mVp-p 10mA 52mA 70 2200μF PDL02-48S05 36 – 75 VDC 5 VDC 40mA 400mA 50mVp-p 10mA 60mA 74 1000μF PDL02-48S09 36 – 75 VDC 9 VDC 22mA 222mA 50mVp-p 10mA 56mA 78 470μF PDL02-48S12 36 – 75 VDC 12 VDC 17mA 167mA 50mVp-p 10mA 55mA 80 170μF PDL02-48S15 36 – 75 VDC 15 VDC 13mA 134mA 50mVp-p 10mA 55mA 79 110μF PDL02-48D05 36 – 75 VDC ±5 VDC ±20mA ±200mA 50mVp-p 10mA 62mA 75 ±470 μF PDL02-48D12 36 – 75 VDC ±12 VDC ±8mA ±83mA 50mVp-p 10mA 57mA 77 ±100μF PDL02-48D15 36 – 75 VDC ±15 VDC ±7mA ±67mA 50mVp-p 12mA 57mA 77 ±47 μF Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress. Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2.Maximum value at nominal input voltage and full load. 3.Typical value at nominal input voltage and no load. 4.Typical value at nominal input voltage and full load. 5.Test by minimum Vin and constant resistive load. 6.The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 7.It will not damage the device without inserting external input capacitors. There is a smaller reflected ripple current when put a capacitor at input. 8.The PDL02 series meet EN55022 Class A with external L-C filter before the input pins to the converter. (Connect networks following Class B figure.) Recommend: 05 Vin : C1=10 μF/25V 1812 MLCC. L1=2.2 μH 0504 SMD Inductor P/N:PMT-059 12 Vin : C1=10μF/25V 1812 MLCC. L1=2.2 μH 0504 SMD Inductor P/N:PMT-059 24 Vin : C1=6.8μF/50V 1812 MLCC. L1=3.3 μH 0504 SMD Inductor P/N:PMT-044. 48 Vin : C1=2.2μF/100V 1812 MLCC. L1=10 μH 0504 SMD Inductor P/N:PMT-047. 9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 50 55 60 65 70 75 36 45 40 INPUT VOLTAGE (V) EFFICIENCY (%) PDL02-48S33 Efficiency VS Input voltage PDL02-48S33 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) 50 60 70 90 100-40 -25 0-10 100 AMBIENT TEMPERATURE (ºC) OUTPUT POWER (%) PDL02-48S33 Derating Curve Nature convection

Page 3 of 3 Issued Date：2008/08/19 PIN CONNECTION PIN SINGLE 1 - INPUT 2 + INPUT

3 CTRL

• INPUT + INPUT CTRL NC + OUTPUT COM -O U T P U T Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 L1 PDL02-05XXX 22μF/2 5 V

1812 MLCC

3.3μH 2.0A 0.06Ω 0504 SMDInductor,P/N:PMT-044 PDL02-12xxx 22μF/2 5 V 3.3μH 2.0A 0.06Ω 0504 SMDInductor,P/N:PMT-044 PDL02-24xxx 4.7μF/5 0 V 12μH 1.4A 0.12Ω 0504 SMDInductor,P/N:PMT-062 PDL02-48xxx 2.2μF/100V 27μH 0.9A 0.2Ω 0504 SMDInductor,P/N:PMT-063 Recommended EN55022 Class B Filter Circuit Layout .0.01(0.3) Rectangular pin 0.08(2.0) 0.36(9.1) 0.13(3.3) BOTTOM VIEW 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 0.16(4.1) 0.02(0.5) 0.44 (11.2) 1 2 3 5 6 7 8 0.100(2.54) 0.86(21.8) FRONT VIEW 0.002(0.50) 0.700(17.78)