PDIUSBP11A PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

/C0109 /C0110 /C0114 PDIUSBP11A Universal Serial Bus Transceiver Product specification Supersedes data of 1997 Aug 01

1999 Jun 04

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

21999 Jun 04 853-2008 21712

FEATURES

  • Complies with Universal Serial Bus specification 1.1
  • Utilizes digital inputs and outputs to transmit and receive USB cable data
  • Supports 12Mbit/s “Full Speed” and 1.5Mbit/s “Low Speed” serial data transmission
  • Compatible with the VHDL “Serial Interface Engine” from USB Implementers’ Forum
  • Supports single-ended data interface
  • Single 3.3V supply
  • Available in SO-14, SSOP-14 and TSSOP-14 packages

DESCRIPTION

The PDIUSBP11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The pinout conforms with the ”Serial Interface Engine”. Implementation of the Serial Interface Engine along with the USB transceiver allows the designer to make USB compatible devices with off-the-shelf logic and easily modify and update the application. The PDIUSBP11A is backward compatible to the PDIUSBP11 and allows for single-ended data interfacing.

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 14-pin plastic SO –40°C to +85°C PDIUSBP11A D PDIUSBP11A D SOT108-1 14-pin plastic SSOP –40°C to +85°C PDIUSBP11A DB PDIUSBP11A DB SOT337-1 14-pin plastic TSSOP –40°C to +85°C PDIUSBP11APW PDUSBP11APW DH SOT402-1 PIN CONFIGURATION 14MODE OE# RCV VP VM SUSPND GND NC SPEED D VPO VMO/FSEO VCC SV00559 FUNCTIONAL DIAGRAM OE# SPEED VMO/FSEO VPO RCV VP VM SV00560

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

1999 Jun 04 3

No. PIN SYMBOL I/O NAME AND FUNCTION 3 RCV O Receive data. CMOS level output for USB differential input 2 OE# I Output Enable. Active LOW, enables the transceiver to transmit data on the bus. When not active the transceiver is in receive mode

1 MODE I

Mode. When left unconnected, a weak pull-up transistor pulls it to VCC and in this mode, the PDIUSBP11A is backward compatible to PDIUSBP11. When connected to GND, the VMO/FSEO pin takes the function of FSEO (Force SEO). Inputs to differential driver. (Outputs from SIE). MODE VPO VMO/FSEO RESULT 0 0 0 Logic “0” 0 1 SE0# 12, 13 VPO ,VMO /FSEO I 1 0 Logic “1”12, 13 VPO , VMO /FSEO I 1 1 SEO# 1 0 0 SE0# 0 1 Logic “0” 1 0 Logic “1” 1 1 Illegal code Gated version of D– and D+. Outputs are logic “0” and logic “1”. Used to detect single ended zero (SE0#), error conditions, and interconnect speed. (Inputs to SIE). VP VM RESULT 4, 5 VP, VM O 0 0 SE0# 0 1 Low Speed 1 0 Full Speed 1 1 Error 11, 10 D+, D– AI/O Data+, Data–. Differential data bus conforming to the Universal Serial Bus standard. 6 SUSPND I Suspend. Enables a low power state while the USB bus is inactive. While the suspnd pin is active it will drive the RCV pin to a logic “0” state. Both D+ and D– are tri-stated. 9 SPEED I Edge rate control. Logic “1” operates at edge rates for “full speed”. Logic “0” operates edge rates for “low speed”. 14 VCC 3.0V to 3.6V power supply

7 GND Ground reference

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

1999 Jun 04 4

RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS LIMITS UNITSYMBOL PARAMETER CONDITIONS MIN MAX UNIT MIN . MAX . VCC DC supply voltage 3.0 3.6 V VI DC Input voltage range 0 5.5 V VAI/O DC input range for AI/O’s 0 VCC V VO DC output voltage range 0 VCC V Tamb Operating ambient temperature range in free airSee DC and AC characteristics per device –40 +85 °C ABSOLUTE MAXIMUM RATINGS 1 In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) SYMBOL PARAMETER CONDITIONS LIMITS UNITSYMBOL PARAMETER CONDITIONS MIN MAX UNIT VCC DC supply voltage –0.5 +6.5 V Ilatchup Latchup current VI < 0 or VI > VCC – 200 mA VI DC input voltage Note 2 –0.5 +5.5 V VI/O DC input voltage range for I/O’s –0.5 VCC +0.5 V VO DC output voltage Note 2 –0.5 VCC +0.5 V ICC , IGND DC V CC or GND current – ±100 mA TSTO Storage temperature range –60 +150 °C PTOT Power dissipation per package mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed.

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

1999 Jun 04 5

DC CHARACTERISTICS (DIGITAL PINS) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = –40°C to +85°C UNIT MIN TYP MAX INPUT LEVELS VIL LOW level input voltage 0.8 V VIH HIGH level input voltage 2.0 V OUTPUT LEVELS VO LOW level output voltage IOL = 4mA 0.4 VVOL LOW level output voltage IOL = 20µA 0.1 V VO HIGH level output voltage IOH = 4mA 2.4 VVOH HIGH level output voltage IOH = 20µA VCC –0.1 V LEAKAGE CURRENT IL Input leakage current ±5 µA ICCS Supply current in Suspend – 5 µA SUPPLY CURRENT ICC Operating supply current – 6 – mA DC CHARACTERISTICS (AI/O PINS) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = –40°C to +85°C UNIT MIN MAX INPUT LEVELS VDI Differential input sensitivity |(D+) – (D–)| 0.2 V VCM Differential common mode range Includes VDI range 0.8 2.5 V VSE Single ended receiver threshold 0.8 2.0 V OUTPUT LEVELS VOL Static output LOW voltage R L of 1.5 kΩ to 3.6V 0.3 V VOH Static output HIGH voltage R L of 15 kΩ to GND 2.8 3.6 V LEAKAGE CURRENT ILO Hi-Z State data line leakage current 0V < VIN < 3.3V ±10 µA CAPACITANCE C IN Transceiver capacitance Pin to GND 20 pF OUTPUT RESISTANCE ZDRV 1 Driver output resistance Steady state drive 6 18 Ω NOTE: 1. Excludes external resistor. In order to comply with USB Specifications 1.1, external series resistors of 24Ω ±1% each on D+ and D– are recommended.

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

1999 Jun 04 6

AC CHARACTERISTICS (AI/O PINS. FULL SPEED) LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = –40°C to +85°C UNIT MIN TYP MAX Driver Characteristics C L = 50pF; R pu = 1.5kΩ on D+ to VCC Transition Time: Between 10% and 90% tR Rise time Waveform 1 41 20 ns tF Fall time Waveform 1 41 20 ns tRFM Rise / Fall time matching (tR /tF) 90 111.1 % VCRS Output signal crossover voltage 1.3 2.0 V Driver Timings tpLH Driver propagation delay Waveform 2 18 ns tpHL (VPO, VMO/FSEO to D+/D–) Waveform 2 19 ns tpHZ Driver disable delay Waveform 4 13 ns tpLZ (OE# to D+/D–) Waveform 4 13 ns tpZH Driver enable delay Waveform 4 17 ns tpZL (OE# to D+/D–) Waveform 4 17 ns Receiver Timings tpLH Receiver propagation delay Waveform 3 16 ns tpHL (D+, D– to RCV) Waveform 3 19 ns tpLH Single-ended receiver delay Waveform 3 8 ns tpHL (D+, D– to VP, VM) Waveform 3 8 ns NOTE: 1. The 4ns specification is only for 0°C to +85°C. AC CHARACTERISTICS (AI/O PINS. LOW SPEED) LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = –40°C to +85°C UNIT MIN TYP MAX Driver Characteristics C L = 200pF and 600pF; R pu = 1.5kΩ on D– to VCC Transition Time: Between 10% and 90% tLR Rise time C L = 200pF. Waveform 1 75 nstLR Rise time C L = 600pF. Waveform 1 300 ns tLF Fall time C L = 200pF. Waveform 1 75 nstLF Fall time C L = 600pF. Waveform 1 300 ns tLRFM Rise / Fall time matching (tLR /tLF) 80 125 % VLCRS Output signal crossover voltage 1.3 2.0 V Driver Timings tpLH Driver propagation delay Waveform 2 300 ns tpHL (VPO, VMO/FSEO to D+/D–) Waveform 2 300 ns tpHZ Driver disable delay Waveform 4 13 ns tpLZ (OE# to D+/D–) Waveform 4 13 ns tpZH Driver enable delay Waveform 4 205 ns tpZL (OE# to D+/D–) Waveform 4 205 ns Receiver Timings tpLH Receiver propagation delay Waveform 3 18 ns tpHL (D+, D– to RCV) Waveform 3 18 ns tpLH Single-ended receiver delay Waveform 3 28 ns tpHL (D+, D– to VP, VM) Waveform 3 28 ns

Philips Semiconductors Product specification PDIUSBP11AUniversal Serial Bus transceiver

1999 Jun 04 7

VOL and VOH are the typical output voltage drops that occur with the output load. (VCC never goes below 3.0V). VOH VOL 90%90% tRISE tFALL SV00186 10% 10% Waveform 1. Rise and Fall Times tPHLtPLH VCR GND 2.7V VCR 1.5V 1.5V INPUT SV00598 Waveform 2. VPO, VMO/FSEO to D+/D– tPHLtPLH VOH VOL 1.5V 1.5V VCR 2.0V 1.0V VCR SV00599 Waveform 3. D+/D– to RCV, VP/VM tPHZ tPLZ tPZH tPZL VOH VOL VM 2.7V 0.5VCC 1.5V 1.5V OE# 0.5VCC VOH –0.3 VOL +0.3 D+/D– SV00597 Waveform 4. OE# to D+/D– TEST CIRCUITS AND WAVEFORMS SV00149 D.U.T. Test Point 25pF Load for VM/VP and RCV SV00150 D.U.T. Test Point 50pF + 24Ω 500Ω V V = 0 for tPZH , tPHZ V = VCC for tPZL , tPLZ Load for Enable and Disable Times SV01097 D.U.T. Test Point 24Ω VCC 1.5kΩ *S1 C L = 50pF, Full Speed C L = 200pF, Low Speed (Min Timing) C L = 600pF, Low Speed (Max Timing) * 1.5KΩ on D– (Low Speed) or D+ (Full Speed) Only Test S1 D–/LS D+/LS D–/FS D+/FS close open open close 15kΩ C L Load for D+/D–

Philips Semiconductors Poduct specification PDIUSBP11AUniversal Serial Bus Transceiver

1999 Jun 04 8

SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

Philips Semiconductors Poduct specification PDIUSBP11AUniversal Serial Bus Transceiver

1999 Jun 04 9

SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1

Philips Semiconductors Poduct specification PDIUSBP11AUniversal Serial Bus Transceiver

1999 Jun 04 10

TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1

Philips Semiconductors Poduct specification PDIUSBP11AUniversal Serial Bus Transceiver

1999 Jun 04 11

Philips Semiconductors Poduct specification PDIUSBP11AUniversal Serial Bus Transceiver

1999 Jun 04 12

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1999 All rights reserved. Printed in U.S.A. Date of release: 06-99 Document order number: 9397 750 06063 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.