PDB-N-S212

PDB-N-S2 ETAL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

service, with or without auxiliary contact, load per way for SZ and/or S2 25 A (30 A upon request) for S4 20 A l Extremely compact design (installation depth 150 mm) l Standard redundant design (2 x 2, 2 x 4, 2 x 6, 2 x 8) l Group signalling for redundant line entry A and/or B is standard l To be used with industrially manufactured power distribution modules(X8340-S02/S04/SZ4) – protected against brush contact l Labelling strips for individual marking l Blank covers (bulk shipped) l Integral cable clamp rail l Load output connector for SZ and/or S2 protected against reverse polarity l Spring loaded terminals for S4 l Other versions are available upon request (e.g. with series fuse, separate circuits, single and redundant circuits, customer-specific marking etc)

Ordering information

PDB standard Power-D-Box ® 19“ with interchangeable ETSI flange – 19“ protected pole N negative pole protected Module S4 X8340-S0416-2* SZ X8340-SZ4R/L..-101-00* xx number of ways (total) PDB - N - S2 08 ordering example *technical data on www.e-t-a.de Economy Power-D-Box®: PDB - N - S2 12 2 x 6 ways PDB - N - S2 16 2 x 8 ways PDB - N - SZ 08 2 x 4 ways PDB - N - SZ 16 2 x 8 ways PDB - N - S4 08 2 x 4 ways Preferred types

www.e-t-a.de Modular Economy Power-D-Box® 1646 Schematic diagram PDB-N-S2 Schematic diagram PDB-N-S4 Dimensions PDB-N-S2 Dimensions PDB-N-S4 150 44.45 431 482.6 (19”) 465 max. 88.9 16.97 18.31 1.75 max. 3.5 5.9 power distribution system X8340-S04 44.45 431 482.5 max. 88.9 150 16.97 1.755.90 max. 3.5 C I > NC NO (L) – (N) + (L) – (N) + (L) – SigS ig (N) + terminal- block module with circuit breaker E-T-A 8340-F… (L) – Sig Sig (N) + ground- bridge (optional) module load terminals ground stud (optional) (N) + (N) + (L) – (L) – (L) – C NC NO I > (N) + (N) + (L) – Module for 4 circuit breakers E-T-A circuit breaker type 8340-F… (N) + Sig (L) – screw terminal Sig load terminals ground bridge (optional)

www.e-t-a.de Modular Economy Power-D-Box® 1646 Modular Economy Power-D-Box® Schematic diagram PDB-N-SZ Dimensions PDB-N-SZ 44.45 431 482.6 (19”) 465 max. 88.9 150 power distribution system X8340-SZ4 16.97 18.31 1.75 max. 3.5 5.9 Accessories Module with power supply left-side E-T-A circuit breaker type 8340-F… (L) – (N) + load terminals on front and rear side terminal for signalisation (L) –( N) + C 2I > NC NO (L) –( N) + (L) –( N) + (L) –( N) + (L) – (N) + (L) –( N) + (L) – (N) + (L) – (N) + C 2I > NC NO (N) +(L) – load terminals on front and rear side Module with power supply right -side (N) +(L) – E-T-A circuit breaker type 8340-F… All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications wit- hout notice is reserved. Product markings may not be exactly as the ordering codes. Errors and omissions excepted. Blanking piece for Power-D-Box (circuit breaker types 8340, 8345) Y 308 563 11 Load output terminal protected against reverse polarity (set: 4 moulded sleeves, 8 blade terminals 6.3 x 0.8 mm) 2.05 .748 7.3 18.15 .714 .299 .354 For removing the blanking piece: push in the screwdriver as shown below Withdrawal tool (circuit breaker types 8340-F) X 222 547 11

www.e-t-a.de 1646