PD2425J5050S2HF ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model PD2425J5050 S2HF Rev A Ultra Low Profile 0805 Power Divider 50Ω to 50Ω

Description

The PD2425J5050S2HF is a low profile, sub,miniatur e Wilkinson power divider in an easy to use surface mount package. The PD2425J5 050S2HF is ideal for high volume manufacturing and delivers higher performances than traditional printed and lumped element solutions. The PD2425J5050S2HF is ma tched to 50 Ω and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: WiMAX, 802.11b & g, Bluetooth, ZigBee, and XM & Sir ius radio. The PD2425J5050S2HF does not include the resistive elem ent and therefore, requires an external resistor for operation. The PD2425J505 0S2HF is available on tape and reel for high volume manufacturing pick and place. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25 °° °°C) Parameter Min. Typ. Max Unit Frequency 2400 2500 MHz Input Port Impedance 50 Ω Output Port Impedance 50 Ω Return Loss 18 25 dB Insertion Loss* 0.3 0.4 dB Amplitude Balance 0.1 0.2 dB Phase Balance 1 2 Degrees Isolation (Output Ports) 22 33 dB Power Handling 2 Watts Features:

  • 2400-2500 MHz
  • 22 dB Isolation (output ports)
  • Good Return Loss
  • 0.5 mm Height Profile
  • 50 Ω Input / 50Ω Outputs
  • Low Insertion Loss
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant
  • External Resistor Required
  • Halogen Free Operating Temperature ,55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Mechanical Outline ,Dimensions are in Millimeters 2.04±0.10 1.29±0.10 0.53±0.05 1 2 3 6 5 6x 0.30 GND Designation 2x 0.15 4x 0.37 0.22 4x 0.65 6x 0.98 Orientation Marker Denotes Pin Location 4Orientation Marker Denotes Pin Location TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) Pin GND GND Output 2 Output 1 Input

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model PD2425J5050 S2HF Rev A Typical Broadband Performance: 500 MHz. to 8.0 GHz. Return Loss - Input ,36 ,33 ,30 ,27 ,24 ,21 ,18 ,15 ,12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Insertion Loss ,36 ,33 ,30 ,27 ,24 ,21 ,18 ,15 ,12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Amplitude Balance ,1.5 ,0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Phase Balance ,20 ,15 ,10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] deg Isolation ,36 ,33 ,30 ,27 ,24 ,21 ,18 ,15 ,12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB]

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model PD2425J5050 S2HF Rev A Typical Performance: 2200 MHz. to 2900 MHz. Return Loss - Input ,36 ,33 ,30 ,27 ,24 ,21 ,18 ,15 ,12 2200 2300 2400 2500 2600 2700 2800 2900 Frequency [MHz] [dB] Insertion Loss ,3.6 ,3.3 ,3.0 ,2.7 ,2.4 ,2.1 ,1.8 ,1.5 ,1.2 ,0.9 ,0.6 ,0.3 0.0 2200 2300 2400 2500 2600 2700 2800 2900 Frequency [MHz] [dB] Amplitude Balance ,1.5 ,0.5 0.5 1.5 2200 2300 2400 2500 2600 2700 2800 2900 Frequency [MHz] [dB] Phase Balance ,20 ,15 ,10 2200 2300 2400 2500 2600 2700 2800 2900 Frequency [MHz] deg Isolation ,36 ,33 ,30 ,27 ,24 ,21 ,18 ,15 ,12 2200 2300 2400 2500 2600 2700 2800 2900 Frequency [MHz] [dB]

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432,8909 (800) 411,6596 +44 2392,232392 +86 512,62749282 Model PD2425J5050 S2HF Rev A Mounting Configuration: In order for Xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VS WR may not meet published specifications. All of the Xinger components are constructed from o rganic PTFE based composites which possess excellen t electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green st andards and ready for Pb,free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. In addition, s ince the PD2425J5050S2 is a Wilkinson power divider , an external 0603 100Ω resistor must be mounted in locations R1 as shown in the Figure below. Pad Footprint w/ 0603 Resistor Locations Circuit Pattern Footprint Pad (s) Solder Resist Mounting Footprint Dimensions are in Millimeters 6x .41 6x .33 .04 4x .25 .66 3x Plated thru holes to ground 3x Transmission lines

www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model PD2425J5050 S2HF Rev A Packaging and Ordering Information Parts are available in reels and are packaged per EIA 481-2. Parts are oriented in tape and reel as s hown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information . 8.00 4.00 2.00 .25 2.41 .81 1.75 3.50 4.00 1.60

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Anaren: PD2425J5050S2HF