PD1722J5050D2 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model PD1722J5050D2 Rev D Ultra Low Profile 0805 Power Divider 50Ω to 50Ω

Description

The PD1722J5050D2 is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD1722J5050D2 is ideal for high volume manufacturing and delivers higher performances than traditional printed and lumped element solutions. The PD1722J5050D2 is matched to 50 Ω and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: WCDMA, and GSM, The PD1722J5050D2 does not include the resistive element and therefore, requires an external resist or for operation. The PD1722J5050D2 is available on tape and reel for high volume manufacturing pick and place. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°C) Parameter Min. Typ. Max Unit Frequency 1700 2200 MHz Input Port Impedance 50 Ω Output Port Impedance 50 Ω Return Loss 11 14 dB Insertion Loss* 0.5 0.7 dB Amplitude Balance 0.1 0.3 dB Phase Balance 1 3 Degrees Isolation (Output Ports) 17 19 dB Power Handling 2 Watts Features:

  • 1700-2200 MHz
  • 19 dB Isolation (output ports)
  • 0.5mm Height Profile
  • 50Ω Input / 50Ω Outputs
  • Low Insertion Loss
  • Surface Mountable
  • Tape & Reel
  • Non-conductive Surface
  • RoHS Compliant
  • External resistors required Operating Temperature -55 +85 ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Mechanical Outline Dimensions are in Inches [Millimeters] Tolerances are Non-Cumulative 1 2 3 6 5 4 Bottom View (Far-side)Side ViewTop View (Near-side) 6X .009 [0.22] 6X .012 [0.30] 4X .026 [0.65] Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location .021±.002 [0.53±0.05] .049±.004 [1.25±0.10] .079±.004 [2.00±0.10] .039 [0.98] Mid 2 GND Output 2 Mid 1 Input Output 1 Designation Pin

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model PD1722J5050D2 Rev D Typical Broadband Performance: 500 MHz. to 6.0 GHz. Return Loss - Input -36 -33 -30 -27 -24 -21 -18 -15 -12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Fr e que ncy [M Hz] [dB] Insertion Loss -36 -33 -30 -27 -24 -21 -18 -15 -12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Fre que ncy [M Hz] [dB] Amplitude Balance -1.5 -0.5 0.5 1.5 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB] Phase Balance -20 -15 -10 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] deg Isolation -36 -33 -30 -27 -24 -21 -18 -15 -12 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] [dB]

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model PD1722J5050D2 Rev D Typical Performance: 1600 MHz. to 2300 MHz. Return Loss - Input -36 -33 -30 -27 -24 -21 -18 -15 -12 1600 1700 1800 1900 2000 2100 2200 2300 Frequency [MHz] [dB] Insertion Loss -3.6 -3.3 -3.0 -2.7 -2.4 -2.1 -1.8 -1.5 -1.2 -0.9 -0.6 -0.3 0.0 1600 1700 1800 1900 2000 2100 2200 2300 Frequency [MHz] [dB] Amplitude Balance -1.5 -0.5 0.5 1.5 1600 1700 1800 1900 2000 2100 2200 2300 Fr e que ncy [M Hz] [dB] Phase Balance -20 -15 -10 1600 1700 1800 1900 2000 2100 2200 2300 Frequency [MHz] deg Isolation -36 -33 -30 -27 -24 -21 -18 -15 -12 1600 1700 1800 1900 2000 2100 2200 2300 Frequency [MHz] [dB]

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model PD1722J5050D2 Rev D Mounting Configuration: In order for Xinger surface mount components to work opti mally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique di electric coefficients and thicknesses as well as varying pick and place equipment tolerances. In addition, since th e PD1722J5050D2 is a Wilkinson power divider, external 0402 100Ω and 200Ω resistors must be mounted in locations R1 and R2 respectively, as shown in the Figure below. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. Pad Footprint w/ 0402 Resistor Locations Mounting Footprint Dimensions are in Inches [Millimeters] .026 [0.66] 6X .013 [0.33] 4X .012 [0.30] Plated thru hole to ground 3X Transmission Line Circuit Pattern Footprint Pad (s) Solder Resist 6X .014 [0.35] R2R1

Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model PD1722J5050D2 Rev D Packaging and Ordering Information Parts are available in reels and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. B ØA ØC REEL DIMENSIONS (inches [mm]) ØA B ØC 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 QUANTITY/REEL TABLE 1 ØD 0.512 [13.0]ØD

USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model PD1722J5050D2 Rev D