PD14 LUMEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Export department: Tel.: +48 68 45 75 130 e-mail: export@lumel.com.pl LUMEL S.A. ul. Słubicka 4 65-127 Zielona Góra POLAND WWW.LUMEL.COM.PL PD14 PROGRAMMER FOR LUMEL S.A. PRODUCTS Galvanic isolation: Outputs: Features: Example of application Technical Data Baud rate 9600 bps Information unit 8N1 (8 data bits without the even parity bit, 1 stop bit) Overall dimensions 43 x 51 x 20 mm Wire length 1.5 m Rated Operating Conditions Supply voltage Collected from the device and the USB port Relative air humidity < 95% inadmissible condensation Housing protection grade IP20 Operating position any Galvanic isolation 1000 V
- Destined to program parameters in LUMEL S.A. products.
- Enables the connection of LUMEL S.A. products to a PC computer through the USB interface.
- The device programming is carried out using free eCon software.
- eCon program enables: – change of device parameters, – storage and readout set up parameters to the file, – configuration of any device with the MODBUS protocol. PD14 enables the programming of: - digital meters, network parameter meters, transducers, controllers and others (eCon). eCon software are available on our website: www.lumel.com.pl Inputs: eCon software ORDERING CODE The code PD14 0 - means: programmer PD14 with a usb link for Lumel products, documentation and descriptions in Polish and English version, test certificate PD14-19 software eCon Programming of N24 meter setting parameters. N24 PD14