TPU95_V01 POLYMAKER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
PolyFlex™ TPU95 is a thermoplastic polyurethane (TPU) based filament specifically engineered to work on most desktop 3D printers. It has a shore hardness of 95A and can stretch more than 3 times its original length. Property Testing Method Typical Value Density ISO1183, GB/T1033 1.20-1.24 g/cm3 at 21° C Melt Index 210° C, 1.2 kg 3-6 g/10min Light Transmission N/A N/A Flame retardancy UL94 V2 Property Testing Method Effect of weak acids Not Resistant Effect of strong acids Not Resistant Effect of weak alkalis Not Resistant Effect of strong alkalis Not Resistant Effect of organic solvent No data available Effect of oils and grease No data available Effect of Sunlight No data available
Property Testing Method Typical Value Melting temperature DSC, 10° C/min 168 °C Crystallization temperature DSC, 10° C/min 94 °C Property Testing Method Typical Value 100% modulus (X-Y) ISO 527, GB/T 1040 9.4 ± 0.3 MPa Young’s modulus (X-Y) ISO 527, GB/T 1040 29 ± 2.8 MPa Elongation at break (X-Y) ISO 527, GB/T 1040 330.1 ± 14% Shore hardness ISO 7619, GB/T 31 95A Printing temperature 225 °C Bed temperature 45 ° C Shell 2 Top & bottom layer 4 Infill 100% Environmental temperature 25 ° C Cooling fan ON
DISCLAIMER: The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End- use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice. Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/ recycling practices of Polymaker materials for the intended application. Polymaker makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Polymaker shall not be made liable for any damage, injury or loss induced from the use of Polymaker materials in any application.