PCY2130L34

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

TYPE SPECIFICATION 1 OF 22 14-01-14 ( C ) PILKOR ELECTRONICS 2014 QSN-075-25 Safety MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm QUICK REFERENCE DATA Capacitance range(E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic category Temperature range Reference IEC specification Safety approvals Potting & Encapsulation material Safety class 300 V 55/105/21 IEC 60384-14(3rd edition) and EN 60384-14 UL 60384-14 & CSA E60384-14:09(cUL), ENEC, CQC Qualified in accordance with UL 94V-0 *Intermediate values of the E12 series are available to special order

FEATURES

. 10 to 27.5 mm lead pitch . Supplied loose in box and taped on reel . Consist of a low-inductive wound cell of Metallized Polypropylene film, potted in a flame retardant case

APPLICATIONS

. For Y2-electromagnetic interference suppression . Specially designed to meet the NEW REQUIREMENTS in new IEC 60384-14 specification(3rd edition)/EN 60384-14/UL60384-14 requiring for Y2 a 5kV peak pulse voltage test

• • •• Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 15mm 22.5 and 27.5mm

TYPE SPECIFICATION 2 OF 22 09-05-19 ( C ) PILKOR ELECTRONICS 2009 QSN-075-25 Safety

Ordering Information

Available versions Product (lmax ) 12.5 18.0 26.0 31.0 code Packing method C – tol. Lead length & Height Hole to hole ( P o) Pitch (P) * H ; intape height ; for detailed specifications refer to chapter PACKAGING PCY2 130 X X X X X X Type series Capacitance Code Voltage 3 300V Code Original pitch D 10.0mm F 15.0mm J 22.5mm L 27.5mm l h H h l lt P b dt

TYPE SPECIFICATION 3 OF 22 13-12-06 ( C ) PILKOR ELECTRONICS 2010 QSN-075-25 Safety SAFETY APPROVALS SAFETY APPROVALS Voltage Value File Number UL 60384-14 & CSA E60384-14:09(cUL) 300V(AC) 1 ㎋ to 470 ㎋ E165646 ENEC*(SEMKO) 300V(AC) 1 ㎋ to 470 ㎋ SE/0256-5 CQC 300V(AC) 1nF to 470 ㎌ CQC15001121967 * The ENEC-approval together with the CB-Certificat e replace all national approval marks of the follow ing countries(they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finl and; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 5.0 ±± ±± 1.0 mm lt = 25 ±± ±± 2.0 mm 4.0 x 10.0 x 12.5 2000 1200 5.0 x 11.0 x 12.5 1500 1000 6.0 x 12.0 x 12.5 1000 1000 5.0 x 11.0 x 18.0 1000 1000 6.0 x 12.0 x 18.0 1000 1000 7.0 x 13.5 x 18.0 1000 1000 8.5 x 15.0 x 18.0 1000 1000 10.0 x 16.5 x 18.0 1000 1000 7.0 x 16.5 x 26.0 1000 1000 8.5 x 18.0 x 26.0 1000 1000 10.0 x 19.5 x 26.0 500 500 12.0 x 22.0 x 26.0 500 500 13.0 x 23.0 x 31.0 250 250 15.0 x 25.0 x 31.0 250 250 18.0 x 28.0 x 31.0 200 200 21.0 x 31.0 x 31.0 150 150

TYPE SPECIFICATION 4 OF 22 11-06-16 ( C ) PILKOR ELECTRONICS 2011 QSN-075-25 Safety SPECIFIC REFERENCE DATA FOR 300 V AC at 1 khz at 10 khz at 100kHz Tangent of loss angle ≤ 10 x 10 -4 ≤ 20 x 10 -4 ≤ 100 x 10 –4 Rated voltage pulse slope (dV/dt)R P = 10.0mm P = 15.0mm P = 22.5mm P = 27.5mm

800 V/㎲

600 V/㎲

500 V/㎲

400 V/㎲

R between leads, for C ≤ 0.33 ㎌at 100V 1min 〉15 000 ㏁ RC between leads, for C > 0.33 ㎌at 100V 1min 〉5 000 s R between leads and case ; 100V 1min 〉30 000 ㏁ Withstanding(DC) Voltage (cut-off current 10mA) 3400V ; 1 min Withstanding(AC) Voltage between leads and case 240 0V ; 1 min VRac = 300 V ~ Y2 loose and taped CATALOGUE NUMBER loose in box Cap. (㎌㎌ ㎌㎌) b x h x l (mm) Mass (g) C – tol. ±± ±± 20 % C – tol. ±± ±± 10 % C – tol. ±± ±± 20 % C – tol. ±± ±± 10 %

TYPE SPECIFICATION 5 OF 22 07-12-18 ( C ) PILKOR ELECTRONICS 2007 QSN-075-25 Safety VRac = 300 ~ Y2 loose and taped CATALOGUE NUMBER loose in box Cap. (㎌㎌ ㎌㎌) b x h x l (mm) Mass (g) C – tol. ±± ±± 20 % C – tol. ±± ±± 10 % C – tol. ±± ±± 20 % C – tol. ±± ±± 10 % Original pitch New Code Old Code Example 10.0mm PCY2 130Dxxxxx PCY2 130 3xxxx 15.0mm PCY2 130Fxxxxx PCY2 130 4xxxx 22.5mm PCY2 130Jxxxxx PCY2 130 5xxxx 27.5mm PCY2 130Lxxxxx PCY2 130 6xxxx PCY2 130 60474 => PCY2 130L30474

TYPE SPECIFICATION 6 OF 22 11-05-31 ( C ) PILKOR ELECTRONICS 2011 QSN-075-25 Safety MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. . For pitches of 15mm the capacitors shall be mechanically fixed by leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; - Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : h max ≤ h+0.3 mm STORAGE TEMPERATURE . Storage temperature : T stg = -25 to +40 oC with RH maximum 80% without condensation. Eccentricity lmax = l +0.3 mm bmax = b + 0.3 mm

TYPE SPECIFICATION 7 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values ap ply to an ambient temperature of 23 ± 1℃, an atmospheric pressure of 86 to 106kPa and a relative humidity 50 ± 2%. For reference testing, a conditioning period shall be applied of 96 ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Maximum RMS Voltage as a function of frequency 10 3 10 2 AC voltage (V) 10 1 10 2 10 3 10 4 10 5 f(Hz) AC voltage(RMS value) as a function of frequency at T amb. ≤105 ℃ 10 1

TYPE SPECIFICATION 8 OF 22 13-12-06 ( C ) PILKOR ELECTRONICS 2013 QSN-075-25 Safety PRODUCT MARKING Capacitors are marked with having following information; 1.Manufacturer (PILKOR) 2.Manufacturer's type designation (130 or PCY2 130) 3.Rated capacitance in code according to IEC 60062 4.Rated (AC) voltage (300V 5.Sub class (Y2) 6.Tolerance on rated capacitance M = ± 20 % K = ± 10 % 7.Climatic category (55/105/21) 8.Code for dielectric material (MKP) 9.Year and week of manufacturing (e.g. 1301) 10.Safety approvals Example of marking (*CQC Marking will be applied 2016.01.04) Pitch P = 10 mm Marking on the side or Marking on the side Pitch P = 15 mm or 22.5 mm or 27.5mm Marking on the top Marking on the side Pitch P = 22.5 mm or 27.5mm Marking on the top Pitch P = 27.5 mm Marking on the top 15 n M 300 V~ Y2 PCY2 130 MKP PILKOR 1301 CQC CQC CQC CQC CQC CQC CQC CQC 55/105/21 470n M 300 V~ Y2 PCY2 130 MKP PILKOR 1301 470n M 300V~

130 PILKOR 1301

10n M 300V~ 10n M 300V~ Y2

TYPE SPECIFICATION 9 OF 22 13-12-06 ( C ) PILKOR ELECTRONICS 2013 QSN-075-25 Safety PACKAGE MARKING The package containing the capacitors in marking as shown. For 4E/6E/9E/11E For 4E/6E/9E/11E For 4E/6E/9E/11E For 4E/6E/9E/11E LINE MARKING EXPLANATION 1. Manufacturer's name 2. Sub-family 3. Type description and safety class Y2 4. Capacitance value, tolerance, voltage and climatic category (IEC) 5. Safety approvals & Lead free marking (JEDEC- STD-97) 6. Batch Nr & production period year and week c ode 7. Quantity and product code (12NC) *** Color of Label : Light green Color of Safety Marking : Red *CQC Marking will be applied 2016.01.04 PILKOR Electronics INTERF . SUPPR. FILM CAP ACITOR MKP RADIAL POTTED TYPE Y2 0.1uF ±20% 300V ~ 55/105/21

2000 PCY2 130D30152

305V~

TYPE SPECIFICATION 10 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety PACKING DIMENSIONS OF TAPED PRODCUTS TAPED ON REEL Capacitor with terminal pitch P = 10 mm Capacitor with terminal pitch P = 15 mm

TYPE SPECIFICATION 11 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety Capacitor with terminal pitch P = 22.5 or 27.5 mm ITEM SYMBOL VALUE VALUE TOLERANCE LEAD TO LEAD DISTANCE(mm) F 22.5 27.5 +0.5/-0.1 HEIGHT OF COMPONENT FROM TAPE CENTER TO SEATING PLANE(mm) H 18.5 0.5 COMPONENT HEIGHT FROM TAPE CENTER(mm) H1 40 max 48 max FEED HOLE TO LEAD CENTER(mm) P1 7.8 5.33 0.7

TYPE SPECIFICATION 12 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety AMMOPACK Capacitor with terminal pitch P = 10 mm. Capacitor with terminal pitch P = 15 mm. 304.8(24 Pitches) 11 Capacitors 12.7 ±0.2 7.7 ±0.7 25.4 ±1 Lead pitch 10.0 +0.5 -0.1 4±0.2 304.8(24 Pitches) 11 Capacitors 12.7 ±0.2 5.2 ±0.7 25.4 ±1 Lead pitch 15.0 +0.5 -0.1 4±0.2

TYPE SPECIFICATION 13 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety Capacitor with terminal pitch P = 22.5 mm. Capacitor with terminal pitch P = 27.5 mm.

8 Capacitors

24 Pitches

• 0.1

7 Capacitors 12.7 ± 0.2 27.5 + 0.5 - 0.1

TYPE SPECIFICATION 14 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety CHARACTERRISTICS OF TAPED PRODCUTS Cumulative pitch error 1.0mm/20 pitches Pull-out force of the component ≥ 5 N Pull-out force of the adhesive tape ≥ 6 N Tearing force of tape ≥ 15 N Storage temperature - 25 to + 40 ℃℃ ℃℃ Relative humidity max. 80 % without condensation The max. number of empty places per reel shall not exceed 0.5% of the total number of components per reel, but no more than 2 consecutive positions may be vacant. Outlines of reel & ammo packing (dimensions in mm) W as function of product dimensions l = 12.5 or 18.0 mm l = 26 or 31 mm b (mm) W 2 (mm) b (mm) W 2 (mm) 4.0 5.0 6.0 7.0 8.5 10.0 6.0 7.0 8.5 9.0 10.0 11.0 13.0 15.0 18.0

TYPE SPECIFICATION 15 OF 22 10-06-04 ( C ) PILKOR ELECTRONICS 2010 QSN-075-25 Safety INSPECTION REQUIREMENTS Note 1 : Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, IEC 384-14 and Section One this specification. Note 2 : Inspection levels are selected from IEC-Publication 410: Sampling Plans and Procedures for inspection by attributes. Note 3 : In this table : p = periodicity in months n = sample size D = destructive ND = non-destructive IL = inspection level ) IEC 410 AQL = acceptance quality level ) Note 4 : For this capacitors, considered as a solid construction, the periodicity of the vibration and shock test is reduced from 36 months to 6 months. CLAUSE NUMBER AND TEST D OR ND CONDITIONS IL n PERFORMANCE REQUIREMENTS Group A inspection (lot by lot) Sub-group A1 ND

4.1 Visual examination

4.1 Dimensions 2)

No visual damage Legible marking and as specified in MARKING specification AS specified in Table 1 of this specification. Sub-group A2 3) ND 4.2.2 capacitance

4.2.3 Tangent of loss angle

4.2.1 Voltage proof

(test A)

4.2.5 Insulation resistance

(test A) at 1 khz at 10 khz C ≤≤ ≤≤ 1 uF at 1500 V(a.c) for 1 min. at 100 V 1min. Within specified tolerance As in RATINGS AND CHARACTERISTICS of this specification No permanent breakdown or flashover. Self healing allowed As in RATINGS AND CHARACTERISTICS of this specification 1) Number to be tested : Sample size as directly allotted to the code letter for IL in Table 2A of IEC 410 (Single sampling plan for normal inspection) The acceptance number complies with AQL value : 0.65 % 2) This test may be replaced by in-production testing, if SPC on dimensional measurements or other mechanisms to avoid parts exceeding the limits is installed. 3) The 100% End-of-line testing is followed by re-inspection by sampling in order to monitor outgoing quality level by defectives per million (DPM). The sampling level and the calculation of DPM values is in accordance with CECC 00 014, counting any parametric failure as a defective. In case one or more defectives occur in a lot, this lot shall be rejected.

TYPE SPECIFICATION 16 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS Group C inspection (periodic) D 6 6 Sub-group C1A part of a sample of sub-group C1

4.1 Dimensions (detail)

4.3.1 Initial measurements

4.3 Robustness of

4.4 Resistance to

4.14 Component solvent

4.4.2 Final measurements

at 10 khz C ≤≤ ≤≤ 1 uF Tensile and bending Method : 1A Solder bath : 260 ℃℃ ℃℃ Duration : 10 s Isopropylalcohol at room temperature. Method : 2 Immersion time: 5 ±± ±± 0.5 min Recovery time : min 1 hour max 2 hours Visual examination Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance As specified in Table 1 of this specification No visible damage No visible damage Legible marking ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 As in RATINGS AND CHARACTER-ISTICS of this specification Sub-group C1B Other part of sample of sub-group C1 D 6 12

4.6.1 Initial measurements

4.6 Rapid change of

4.6.1 Inspection

at 10 khz C ≤≤ ≤≤ 1 uF θθ θθ A=lower category temperature θθ θθ B=upper category temperature 5 cycles Duration t = 30 min. Visual examination No visible damage

TYPE SPECIFICATION 17 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS

4.7 Vibration

(see note 4)

4.7.2 Final inspection

4.9 Shock (see note 4)

4.9.3 Final measurements

Method of mounting : see MOUNTING of this specification Procedure B4 Frequency range : 10Hz to 55 Hz Amplitude : 0.75mm or acceleration 98m/s (whichever is less severe) Total duration : 6h Visual examination Method of mounting : see MOUNTING of this specification Pulse shape : half sine Acceleration : 490 m/s Duration of pulse : 11 ms Visual examination Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance No visible damage No visible damage ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 As in RATINGS AND CHARACTER -ISTICS of this specification Sub-group C1 Combined sample of specimens of sub-groups C1A and C1B D 6 18

4.11 Climatic sequence

4.11.2 Dry heat

4.11.3 Damp heat cyclic,

test Db, first cycle

4.11.4 Cold

4.11.6 Damp heat cyclic,

test Db, remaining cycle

4.11.6.2 Final measurements

T = T upp-cat Duration ; 16 hours T = T low-cat Duration ; 2 hours Visual examination No visible damage Legible marking

TYPE SPECIFICATION 18 OF 22 04-10-11 ( C ) PILKOR ELECTRONICS 2004 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Voltage proof 1500 Vac 1 min Insulation resistance ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 No permanent breakdown or flashover ≥≥ ≥≥ 50% of values in RATINGS AND CHARACTERISTICS of this specification Sub-group C2 D 6 10

4.12 Damp heat steady

4.12.1 Initial measurement

4.12.3 Final measurements

at 10 khz C ≤≤ ≤≤ 1 uF Visual examination Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Voltage proof 1500 Vac, 1 min Insulation resistance No visible damage Legible marking ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 No permanent breakdown or Flash over ≥≥ ≥≥ 50% of values in RATINGS AND CHARACTERISTICS of this specification Sub-group C3 D 3 12

4.13.1 Initial measurements

4.13 Peak impulse voltage

at 10 khz C ≤≤ ≤≤ 1 uF 3 succesive impulses, full wave, peak voltage : 5 kV. Max. 24 pulses No self healing breakdown or Flash over

TYPE SPECIFICATION 19 OF 22 11-05-31 ( C ) PILKOR ELECTRONICS 2011 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS

4.14 Endurance

4.14.6 Final measurements

Duration : 1000 hours 1.7 x V Rac at 105℃℃ ℃℃ Once in every hour the voltage is increased to 1000V (RMS) for 0.1 s via a resistor of 47 ΩΩ ΩΩ 5 %. Visual examination Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance Voltage proof 1500 Vac, 1 min No visible damage Legible marking ΔΔ ΔΔ C/C ≤≤ ≤≤ 10% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 ≥≥ ≥≥ 50% of values in RATINGS AND CHARACTERISTICS of this specification No permanent breakdown or Flash over Sub-group C4 D 6 6

4.15 Charge and discharge

4.15.1 Initial measurement

4.15.3 Final measurements

10000 cycles : (50c/s) charge to V R half sine wave Duration : 5 ms Discharge resistance V Rac . √√ √√ 2 1.5 x C (dU/dt) With a minimum resistance of 2.2 ΩΩ ΩΩ Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance ΔΔ ΔΔ C/C ≤≤ ≤≤ 10% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 ≥≥ ≥≥ 50% of values in RATINGS AND CHARACTERISTICS of this specification

TYPE SPECIFICATION 20 OF 22 11-05-31 ( C ) PILKOR ELECTRONICS 2011 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS Sub-group C6 12 18

4.17 Passive flammability

Bore of gas jet : φφ φφ 0.5 mm Fuel : Butane Test duration for actual volume V in mm V ≤≤ ≤≤ 250 : 5s V 〉〉 〉〉 1750 : 30s One flame application After removing test flame f rom capacitor, the capacitor must not continue burn for more than 3 s. No burning particle must drop from the sample. Sub-group C7 12 24

4.18 Active flammability

Ui = 5kV for class Y2 20 discharges in tank capacitor (3uF) when discharged, places Ui across the capacitor under test. The discharging interval : 5s. The test capacitor during the discharges connected to VR (16A). V R shall be maintained for 2 min after the last discharge. The chees cloth around the capacitor shall not burn with a flame. Not electrical measurements are required. 45 O

TYPE SPECIFICATION 21 OF 22 11-05-31 ( C ) PILKOR ELECTRONICS 2011 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS P n PERFORMANCE REQUIREMENTS Sub-group ADD1 D 3 10 A.1 Solderability Solvent resistance of the marking Without ageing Method : 1 Non-activated colophiny flux 501 Solder bath 245℃℃ ℃℃ Dwell time : 3 s Isopropylalcohol at room temperature. Method : 1 Rubbing material cotton wool immersion time : 5 ±± ±± 0.5 min. Good tinning as evidenced by free flowing of the solder with wetting of the terminations ( 〉〉 〉〉95 % ) Legible marking Sub-group ADD2 D 3 12 A.2 Heat storage A.2.1 Initial measurements

4.2.2 Final measurements

Duration : 1000 h Temperature : upper Category temperature Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 As in RATINGS AND CHARACTER -ISTICS of this specification Sub-group ADD3 3 9 A.3 Detergent resistance A.3.1 Initial measurement A.3.2 Final measurements Density 20g/L dishwasher detergent. Temperature 70 ℃℃ ℃℃ during 3 minutes followed by rinsing in clear water for 1 minute. Recovery time 1 to 2 hours Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Insulation resistance ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 〉〉 〉〉50% of values in RATINGS AND CHARACTERISTICS of this specification

TYPE SPECIFICATION 22 OF 22 13-06-11 ( C ) PILKOR ELECTRONICS 2013 QSN-075-25 Safety CLAUSE NUMBER AND TEST D OR ND CONDITIONS IL n PERFORMANCE REQUIREMENTS Sub-group ADD4 D 6 10 A.4 Resistance to soldering heat with preheating A.4.1 Initial measurement A.4.2 Final measurements Capacitors mounted on a 1.6 mm board with nonplated holes. Body temp. : 100 ℃℃ ℃℃ Dwell time : 10 s. Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF Capacitance Tangent of loss angle at 10 khz C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ C/C ≤≤ ≤≤ 5% of the value measured initially Increase of tan-delta : for C ≤≤ ≤≤ 1 uF ΔΔ ΔΔ tan d 〈〈 〈〈 0.0080 Sub -group ADD5 D 12 10 A.5 Thermal Shock θθ θθA = lower category temperature θθ θθB = upper category temperature 100 cycles Duration t = 30 min ΔΔ ΔΔ C/C < 10% ΔΔ ΔΔ tan δδ δδ(1KHz) < 0.005 R ins > 50% specified value

/circle6 Product type ; Metallized Polypropylene film capacitors /circle6 Model name ; PCY2 130 (5) (1) (3) (2) (4) Description Description Description Description Material Material Material Material

1 MKP Film Metallized polypropylene film

2 Metal Spray Tin-Zinc

3 Epoxy UL94V-0

4 Lead Wire

0.6/0.8mm [Sn100%:10 ㎛]

5 PP Case POLYPROPYLENE

Metallized Polypropylene film

• Heat resisting temperature (Capacitor inside) MKT : 160 ℃ KP/MKP : 110 ℃ When mounting, set the soldering temperature so tha t the capacitor inside peak temperature is to be lower than the given above heat resisting temperature. - Preheating temp : Max 110 ℃, 1min [If dipping a capacitor into solder twice, the seco nd dipping shall be carried after the capacitor its elf has returned to normal temperature] Not passing through adhesive curing oven in order to fix the SMD parts in combination with leads parts. - Not reflow soldering by combine the lead parts with SMD parts. When cleaning right after soldering, make sure the capacitor surface temperature is lower than 50 ℃ Time [S] Iron Dip soldering Temp [℃] 1 2 3 4 5 6 350 260

Wave soldering profile (Recommendation) - Solder bath Temperature : 260 ℃ Max. - Shield : Heat-absorbing board, (1.5 ±0.5)mm thick, between capacitor body and liquid solder - Visual inspection : No visible damage - △C/C : 5% Preheating 60s T ( )℃℃ ℃℃ t (s) 260 ℃℃ ℃℃, 5s 110