PCY NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Dimension table in next page. PCY High temperature, Long life Assurance High temperature, Long life Assurance, Low ESR. Long Life of 12000 hours at 125°C. SMD type : Lead free reflow soldering condition at 260°C peak complete correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +125°C 2.5 to 16V 100 to 560µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C Endurance Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 12000 hours at 125°C. The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In case peak temperature is 250°C or less, reflow soldering shall be two times maximum. In case peak temperature is 260°C or less, reflow soldering shall be once. The temperature profile measurement shall be the temperature at the top of the capacitor. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P C Y C M C L 1 1 G S Configuration Taping code Size code Capacitance tolerance (±20%) Rated capacitance (100µF) Rated voltage (16V) Type, Series name C Y 1 0 0 C 5 1 1 H 0.3 max.B± 0.2 A±0.2 C±0.2 0.5 max. φD±0.5 E Series Voltage (C :16V ) Plastic platform Lot No. Capacitance Negative Positive L±0.3 Dimensions Type numbering system (Example : 16V 100µF) Frequency coefficient of rated ripple current
0 Frequency0/
120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00 Voltage V 2.5 6.3 16 Code e j C PCY PCL High temperature, Long life Size φD L A B C E H (mm) φ6.3 × 6.7L 6.3 6.7 7.3 6.6 6.6 2.1 0.5 to 0.8 TENTATIVE Apr. 2025 CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
（V） （code） Surge Voltage (V) Rated Capacitance （µF） Case Size φD×L （mm） tanδ Leakage Current （µA） ESR （mΩ） （20℃ /100kHz） Rated Ripple （mArms） （125℃ /100kHz） Part Number at 20℃ after 2 minutes ） 2.5 （0E） 2.8 560 6.3×6.7 0.12 280 16 1300 PCY0E561MCL1GS 6.3 （0J） 7.2 330 6.3×6.7 0.12 415 18 1300 PCY0J331MCL1GS （1C） 18.4 100 6.3×6.7 0.12 320 25 1000 PCY1C101MCL1GS Dimensions CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS