D7001 PANDUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 116
Technical content
$200,000 to $320,000 INDIRECT COSTS Property Damage and Repair, Training and Compensation for Replacement Workers, Fines for Workplace Safety Violations, Administrative Costs* EVERY 30 MINUTES A WORKER IS SEVERELY HURT FROM ELECTRICITY AND THE COSTS ARE SURPRISING VeriSafe | Safety $50,000 to $80,000 DIRECT COSTS Workers’ Compensation, Medical and Legal Expenses 11.7% 18.3% 36.7% Reported near misses of personal injury Facilities experienced interruptions to plant operations due to voltage testing incidents Facilities experienced a personal injury when using hand-held voltage test instruments* TEST THE TESTER CHECK THE VOLTAGE RE-TEST THE TESTER TEST THE TESTER CHECK THE VOLTAGE RE-TEST THE TESTER VeriSafe™ AVT Prevents direct exposure to electrical hazards and determines voltage status before equipment is accessed. Traditional Method Determining absence of voltage with hand-held testers presents a risk of exposure to electrical hazards. VeriSafe™ Absence of Voltage Tester (AVT) minimizes risk by performing voltage verification testing before equipment is accessed – every time, every test. From Electrical Shock and Arc Flash Events. Quincy, MA: Fire Protection Research Foundation, 2015. VeriSafe ABSENCE OF VOLTAGE TESTER ©2018 Panduit Corporation. All rights Reserved. SFFL03--SA-ENG
Safety Signs & Labels Pages 2 – 34 Haz-Com / GHS Pages 81 – 86 Traffic Signs Pages 87 – 92 Cable Ties & Wire Markers Pages 47 – 52 Floor Signs & Tapes Pages 93 – 99 Labelmakers Pages 53 – 55 Barriers & Barricades Pages 100 – 107 ID Tags & Pipe Markers Pages 56 – 61 Motivation Page 108 Lockout / Tagout Pages 62 – 80 Index Pages 109 – 112 Safety Tags Pages 35 – 44 Safety Absence of Voltage Testers (AVT) Pages 45 – 46 36, 57 36, 57 36, 57 36, 57 1007B4845 36, 57 36, 57 38, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 36, 57 38, 57 37, 57 38, 57 39, 57 39, 57 39, 57 39, 57 36, 57 37, 57 38, 57 38, 57 37, 57 57, 82 57, 85 57, 85 37, 57 37, 57 37, 57 37, 57 38, 57 37, 57 38, 57 38, 57 38, 57 38, 57 38, 57 37, 57 37, 57 ABM2S-A-C ABM2S-AT-C0 ABM3H-A-L ABM3H-AT-L ABM4H-A-L ABM4H-AT-L ABM112-A-C ABM112-AT-C0 ABMM-A-C ABMM-AT-C0 ACC19-A-C ACC38-A-C ACC62-A-C B3431 B3440 B3445 B3449 B3500 B3501 B3502 B3503 B3504 B3506 B3507 B3508 B3509 B3510 B3511 B3512 B3513 B3514 B3515 B3516 B3517 B3518 B3519 B3520 B3521 B3522 B3523 B3524 B3525 B3526 B3527 B3528 B3529 B3530 B3531 B3532 B3533 B3534 B3535 B3536 B3538 B3539 B3540 B3541 B3542 B3543 B3545 B3546 B3548 B3549 B3550 B3552 B3556 B3557 B3559 B3562 B3565 B3567 B3569 B3571 B3576 B3587 B3589 B3915 B3920 B3923 B3927 B4201 B4203 B4209 B4219 B4221 B4472 B4477 B4481 B4501 B4502 B4503 B4504 B4505 B4507 B4508 B4509 B4510 B4511 B4512 B4513 B4515 B4516 B4518 B4519 B4520 B4521 B4524 B4526 B4529 B4531 B4533 B4534 B4535 B4536 B4542 B4547 B4549 B4551 B4552 B4557 B4559 B4563 B4575 B4576 B4578 B4579 B4581 B4585 B4586 B4907 B4908 B4912 B4913 B4933 B4935 B4939 B4944 B4974 B4997 B5531 B5579 B5616 B5624 B7012 B7024 B7025 B7026 B7027 B7028 B7029 B7030 B7031 B7032 B7033 B7038 B7039 B7040 B7041 B7042 B7050 B7075 B7076 B7077 B7078 B7079 B7080 B7081 B7082 B7100 B7182 B7183 B7184 B7185 B7186 B7187 B7188 B7189 B7191 B7192 B7193 B7194 B7195 B7196 B7199 B7200 B7201 B7202 B7203 B7204 B7205 B7206 B7208 B7209 B7210 B7211 B7217 B7218 B7219 B7220 B7221 B7222 B7223 B7224 B7225 B7226 B7227 B7228 B7229 B7230 B7240 B7241 B7244 B7245 B7246 B7247 B7248 B7249 B7250 B7251 B7252 B7253 B7254 B7255 B7256 B7257 B7258 B7259 B7260 B7261 B7262 B7263 B7267 B7268 B7269 B7270 B7271 B7288 B7289 B7290 B7291 B7292 B7293 B7294 Part Number Index 800.777.3300 | Panduit.com 109 AC Plug Lockouts – Network Plugs | Index
Top 10 most frequently cited standards by Federal OSHA in fiscal year 2017 (October 1, 2016 through September 30, 2017). PRACTICAL SOLUTIONS FOR OSHA’S TOP 10 SAFETY VIOLATIONS Fall Protection Keep fall protection readily available to help protect workers. Safety Signs – Page 251 Hazard Communication Comply with Haz-Com requirements and GHS provisions. Haz-Com – Page 85 Scaffolding Increase jobsite safety with simple safety notifications. Safety Tags – Page 38, 40 Respiratory Protection Prevent entry into areas where dangerous gases may be present. Free Standing Signs – Page 102
310 Practical Solutions
When in doubt, lock out equipment. Protect workers from accidental start-up. Lockout/Tagout – Page 62, 63, 725 Powered Industrial Trucks Help avoid accidents in and around forklifts. Floor Signs & Tapes – Page 997 Electrical – Wiring Methods Be aware of dangers associated with electrical hazards. Cable Ties – Page 48 Wire Markers – Page 49 Fall Protection – Training Requirements Utilize fall protection signs to fulfill OSHA's training requirements. Safety Signs – Page 25 Ladders Raise awareness about ladder and stairway safety to prevent accidents. Safety Signs – Page 38, 40 Machine Guarding Post warning signs and labels to warn employees of potential machine guarding hazards. Safety Signs – Page 68 800.777.3300 | Panduit.com
4 Introduction to Safety Signs & Labels
t ANSI STYLE t Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates information considered important but not hazard-related. Indicates specific safety-related instructions or procedures that are related to safe work practices. OSHA OSHA OSHA OSHA OSHA ANSI ANSI ANSI ANSI ANSI Stock Safety Signs & Labels Our stock signs and labels are ready to ship … today. Safely made in the USA! OSHA 29 CFR § 1910.145 ANSI Z535 Traditional OSHA-style signs and labels are the most widely recognized design format in industry. They use upper case lettering, and the message is generally centered underneath the header. This standardized sign format continues today to be the choice for selecting messages in safety signs. WARNING ORANGE CAUTION YELLOW NOTICE BLUE SAFETY FIRST GREEN DANGER RED Newer ANSI-style signs and labels are gaining in popularity and are recognized by OSHA as an acceptable safety notification device. Signs often include a visual alert symbol (triangle with an exclamation point!), a large symbol, and left-justified upper and lower case message lettering. These signs are clearly visible and provide concise safety alert messages.
Choose the Right Stock Material Your facility signs are used indoors and outdoors, in ordinary conditions or extreme. We offer materials to match your needs. Select a material based upon your application requirements to ensure your message is conveyed clearly and effectively. Every sign we make is American-made and skillfully crafted with quality in mind. Our stock signs are available in a variety of materials and printed with technologically advanced inks. With many materials featuring no-hassle extended guarantees, your printed sign will continue to notify and alert employees for years. For additional information, please give us a call. Adhesive Vinyl (PVS) Stick with adhesive vinyl for light-duty applications. The ideal choice for a variety of indoor, and sheltered outdoor, marking needs. Easily mounts to all curved areas such as pipes, poles and secondary containers. Material Features
- 0.004" thick printed matte surface
- Permanent acrylic adhesive
- Moisture-resistant
- Service temperature range: -20° to 176°F
- Square corners and scored backing for quick peel-off and application
- Durability: 2 years outdoors
Applications
- Adheres to most surfaces
- Indoor usage
- Light-duty application
- Sheltered outdoor locations Polyethylene Plastic (PRS) Appropriate for everyday medium-duty marking needs. Semi-flexible, economical design with 50% recycled content is ideal for indoor and sheltered outdoor environments. Material Features
- 0.055" thick with good impact resistance and surface image with non-glare finish
- Manufactured with 50% recycled plastic and is recyclable
- Ideal for flat surfaces, with enough flex to mount on slightly curved areas
- Contains UV inhibitors
- Service temperature range: -90° to 168°F
- Rounded corners and 0.1875" mounting holes
- Durability: 2 years outdoors
- Indoor usage
- Medium-duty marking needs
- Sheltered outdoor locations
- Ideal for low-cost informational usage MADE FROM RECYCLED MATERIALL 50% Polyester Laminated Vinyl (PLVS) Dual-layered polyester laminated vinyl delivers exceptional flexibility and performance. Durability, even in the toughest indoor and outdoor conditions. Material Features
- 0.006" thick poly-composite with UV protective coating
- Sub-surface image is protected by high-gloss polyester film from water, chemicals and abrasion
- Permanent acrylic adhesive backing
- Service temperature range: -20° to 176°F
- Round corners without holes; scored backing for quick peel-off and application
- Durability: 5 years outdoors
- Indoor and outdoor usage
- Adheres to most surfaces
- Excellent in harsh environments Protective Coating Printed Message 0.006" Vinyl Peel-Off Liner Aluminum (PAS) Get the strength of metal, without the rust. Aluminum has superior abrasion and chemical resistance for indoor and outdoor environments. Material Features
- Printed image on rigid 0.040" aluminum sheet
- UV protective coating
- Service temperature range: -40° to 250°F
- Withstands splashes and washdowns
- Endures outdoor environmental conditions
- Rounded corners and 0.1875" mounting holes on most sizes, will be adjusted for larger sizes
- Durability: 5 years outdoors
- Indoor and outdoor usage
- Excellent for harsh environments
- Ideal for longer-term marking needs Protective Coating 0.040" Thick Aluminum Printed Message What is my sign printed on and will it last? Along with looking great, your sign should last as long as it’s needed. The material depends on where your sign is going to be displayed. For indoor, choose light-duty materials; for harsh environments and long-term/extended outdoor exposure, choose from our selection of durable materials listed below. 0.055" Thick Polyethylene Printed Message 0.004" Vinyl Printed MessagePeel-off liner 800.777.3300 | Panduit.com
Safety Signs & Labels Admittance & Exit Signs 7" x 10" 10" x 14" D7001 7" x 10" 10" x 14" D7002 14" x 10" D4007 7" x 10" 10" x 14" D7003 7" x 10" 10" x 14" D7013 14" x 10" D4140 14" x 10" D5142 7" x 10" 10" x 14" D7016 7" x 10" 10" x 14" D7017 7" x 10" 10" x 14" D7018 14" x 10" D4147 7" x 10" 10" x 14" D7019 7" x 10" 10" x 14" D7020 14" x 10" D4077 7" x 10" 10" x 14" D7034 7" x 10" 10" x 14" D7035 7" x 10" 10" x 14" D7004 7" x 10" 10" x 14" W7014 7" x 10" 10" x 14" W7021 7" x 10" 10" x 14" W7036 7" x 10" 10" x 14" W7005 7" x 10" 10" x 14" C7007 7" x 10" 10" x 14" C7015 7" x 10" 10" x 14" C7061 7" x 10" 10" x 14" C7062 7" x 10" 10" x 14" C7063 7" x 10" 10" x 14" N7057 7" x 10" 10" x 14" N7043 7" x 10" 10" x 14" N7008 7" x 10" 10" x 14" N7009 14" x 10" N4802 7" x 10" 10" x 14" N7010 7" x 10" 10" x 14" N7064 7" x 10" 10" x 14" N7065 7" x 10" 10" x 14" N7044 7" x 10" 10" x 14" N7045 7" x 10" 10" x 14" N7046 7" x 10" 10" x 14" N7047 7" x 10" 10" x 14" N7066 14" x 10" N4826 7" x 10" 10" x 14" N7051 7" x 10" 10" x 14" N7067 See How to Order Signs on next page
Safety Signs & Labels 800.777.3300 | Panduit.com 7" x 10" 10" x 14" N7048 7" x 10" 10" x 14" N7058 14" x 10" N5813 7" x 10" 10" x 14" N7049 7" x 10" 10" x 14" N7022 7" x 10" 10" x 14" N7068 7" x 10" 10" x 14" N7069 7" x 10" 10" x 14" N7011 7" x 10" 10" x 14" N7023 7" x 10" 10" x 14" N7037 7" x 10" 10" x 14" N7070 7" x 10" 10" x 14" N7071 7" x 10" 10" x 14" N7052 7" x 10" 10" x 14" N7053 14" x 10" N4813 7" x 10" 10" x 14" N7054 7" x 10" 10" x 14" N7072 7" x 10" 10" x 14" N7073 7" x 10" 10" x 14" N7059 7" x 10" 10" x 14" N7074 7" x 10" 10" x 14" N7055 7" x 10" 10" x 14" N7056 14" x 10" N4811 7" x 10" 10" x 14" B7028 10" x 7" 14" x 10" B7031 7" x 10" 10" x 14" B7029 PROPIEDAD PRIVADA 14" x 10" B4511 7" x 10" 10" x 14" B7030 7" x 10" 10" x 14" B7032 7" x 10" 10" x 14" B7033 7" x 10" 10" x 14" B7040 14" x 10" B4520 7" x 10" 10" x 14" B7041 7" x 10" 10" x 14" B7042 7" x 10" 10" x 14" B7012 7" x 10" 10" x 14" B7075 Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710D70184Select Sign Base Part Number: D70183
Safety Signs & Labels Signs 7" x 10" 10" x 14" B7078 7" x 10" 10" x 14" B7077 10" x 14" B3533 10" x 14" B4535 10" x 14" B4907 14" x 10" B4908 7" x 10" 10" x 14" B7076 7" x 10" 10" x 14" B7081 7" x 10" 10" x 14" B7024 7" x 10" 10" x 14" B7025 7" x 10" 10" x 14" B7080 10" x 14" B4912 Lighted UL LED Exit Signs Light the way of egress routes with illuminated EXIT.
- Long-life, energy efficient, LED lamps, rated at 25+ years
- Ceiling, end, or surface mount
- Emergency style includes rechargeable battery back-up to keep sign lit for 1 1/2 hours during power failure
- Red, 6" letters with knock-out left and right arrows
- Hardwire connection to reliable electrical source required
- 120 or 277 field selectable inputs Thermoplastic Exit Signs
- Scratch- and corrosion-resistant plastic housing
- Measures 7 1/2" x 12 1/4" x 1 3/4"
- UL924 listed Steel Exit Signs
- Durable, 20-gauge, steel housing with white powder-coat finish
- Measures 7 1/2" 12" x 2 1/4"
- UL924 and ULC/ORD-C924-02 listed Part No. Description UOM PSSE001 Standard Each PSSE002 Emergency Part No. Description UOM PSSE003 Standard EachPSSE004 Emergency Meets OSHA 29 CFR §1910.37 14" x 10" B3513 7" x 10" 10" x 14" B7026 7" x 10" 10" x 14" B7027 7" x 10" 10" x 14" B7039 7" x 10" 10" x 14" B7038 7" x 10" 10" x 14" B7079 7" x 10" 10" x 14" B7050 7" x 10" 10" x 14" B7082 Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS How to Order Signs: Select Material Code: PVS1 Select Size Code: 07102 Select Label Sign Part Number: B70783 Combine Codes in Specific Order for Complete Part Number: PVS0710B70784
Safety Signs & Labels 800.777.3300 | Panduit.com Glow-in-the-Dark UL Exit Signs Normal lighting Blackout The Next Generation in Technology UL glow exit signs store energy from virtually any artificial light source. When properly charged, UL glow signs will glow for over six hours in the event of a blackout. Low-profile, non-radioactive signs can be used for both high-level and low-level applications, and require no electrical hook-up.
- Recyclable
- Energy-saving
- Easy to install
- Maintenance free, 25+ year life Meets The Following Standards:
- Meets NFPA Life Safety Code 101 and OSHA requirements
- Meets current Building Codes: IBC, ICBO, BOCA and SBCCI, NFPA 5000
- ICC ES report #ER-6040
- California State Fire Marshal listing #6200-1617; 100
- City of Los Angeles Research Report: RR 25531 (CSI #16530)
- Ontario Building Materials Evaluation Commission
- Authorization Report BMEC # 03-12-291 Steel Case Style
- 50-ft. viewing distance
- Glow-in-the-dark letters on your choice of three background colors
- Photoluminescent panel is housed inside a durable steel casing
- “Punch-out” directional arrows included
- Surface, flag, or ceiling mount
- Sign size: 8 1/4"H x 15 1/4"W x 1/4"D
- Letter size: 7"H x 7/8" stroke Standard Letters Reflective Letters Plastic Case Style
- 50-ft. viewing distance
- Choose glow-in-the-dark letters on your choice of three background colors
- Photoluminescent panel is housed inside a durable plastic casing
- “Punch-out” directional arrows included
- Surface, flag, or ceiling mount
- Mounting hardware included
- Sign size: 8 3/4"H x 15 3/8"W x 3/4"D
- Letter size: 7"H x 7/8" stroke When ordering, specify case color: Red – RD, Green – GN, or Black – BK. When ordering, specify case color: Red – RD, Green – GN, or Black – BK. Part No. Description UOM PSSE020 Single-face EachPSSE023 Double-face Part No. Description UOM PSSE016 Standard Letters EachPSSE018 Reflective Letters When ordering, specify letter color: Red – RD, or Green – GN. One-Dimensional Plate Style
- 50-ft. viewing distance
- Colored letters on glow-in-the-dark background with optional black plastic frame
- Choose standard or high visibility, reflective lettering in your choice of two colors
- Durable, impact-resistant plastic with 4 corner mounting holes
- “Punch-out” directional arrows included
- Wall mount only
- Sign size: 7 1/2"H x 13"W
- Letter size: 6"H x 13/16" stroke Part No. Description UOM PSSE007 Single-face Each PSSE010 Single-face w/mounting brackets PSSE013 Double-face w/mounting brackets
Safety Signs & Labels Chemicals & Hazardous Materials Signs 7" x 10" 10" x 14" D7083 7" x 10" 10" x 14" D7084 7" x 10" 10" x 14" D7085 7" x 10" 10" x 14" D7086 7" x 10" 10" x 14" D7087 7" x 10" 10" x 14" D7088 7" x 10" 10" x 14" D7101 7" x 10" 10" x 14" D7089 7" x 10" 10" x 14" D7104 7" x 10" 10" x 14" D7105 7" x 10" 10" x 14" D7106 7" x 10" 10" x 14" D7107 7" x 10" 10" x 14" D7090 7" x 10" 10" x 14" D7091 7" x 10" 10" x 14" D7092 7" x 10" 10" x 14" D7093 7" x 10" 10" x 14" D7094 7" x 10" 10" x 14" D7095 7" x 10" 10" x 14" D7096 7" x 10" 10" x 14" D7097 7" x 10" 10" x 14" D7108 7" x 10" 10" x 14" D7098 7" x 10" 10" x 14" C7099 7" x 10" 10" x 14" N7102 3 1/2" x 5" D3029 3 1/2" x 5" D3026 3 1/2" x 5" D3296 3 1/2" x 5" D3304 3 1/2" x 5" C3686 3 1/2" x 5" B3517 3 1/2" x 5" B3548 Labels How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: D33043 Combine Codes in Specific Order for Complete Part Number: PVS0305D33044 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Size Codes 3 1/2" x 5" 0305 See How to Order Signs on next page 3 1/2" x 5" D7347 7" x 10" 10" x 14" N7103 7" x 10" 10" x 14" N7109 SAFETY DATA 14" x 10" B4524 14" x 10" B4518 7" x 10" 10" x 14" B7100 10" x 14" D7345 10" x 14" D7346
Safety Signs & Labels 800.777.3300 | Panduit.com 2" x 9" B3502 2" x 5" B3500 2" x 5" B3542 2" x 5" B3556 1" x 6" B35012" x 9" B3516 2" x 9" B3587 1" x 9" B3534 Labels – Polyester Laminated Vinyl (PLVS) Confined Space Signs 7" x 10" 10" x 14" D7110 14" x 10" D4003 7" x 10" 10" x 14" D7111 7" x 10" 10" x 14" D7112 14" x 10" D4231 7" x 10" 10" x 14" D7115 14" x 10" D4135 7" x 10" 10" x 14" D7113 7" x 10" 10" x 14" D7114 7" x 10" 10" x 14" D7116 3 1/2" x 5" D3251 3 1/2" x 5" D3277 3 1/2" x 5" D3253 3 1/2" x 5" D3291 3 1/2" x 5" D3279 3 1/2" x 5" D3285 3 1/2" x 5" D3275 Labels 6" x 6" D3034 Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710D70844Select Sign Base Part Number: D70843 How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: D32773 Combine Codes in Specific Order for Complete Part Number: PVS0305D32774 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 3 1/2" x 5" 0305 6" x 6" 0606 How to Order Labels: Select Material Code: PLVS1 Select Size Code: 02052 Combine Codes in Specific Order for Complete Part Number: PLVS0205B35424Select Label Base Part Number: B35423 Available Material Code Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 1" x 6" 0106 1" x 9" 0109 2" x 5" 0205 2" x 9" 0209
Safety Signs & Labels Cross Barrier Cross out open entryway to a confined space.
- Crossbuck design fits onto bolt pattern of vertical confined space entry
- Attention-getting diagonal red-white stripes are surface-printed and protected by laminate film
- Adjustable crossbuck pivots flat for easy transport and storage
- Crossbuck arms measure 6" x 42" with 1.5" x 9" slotted cutouts at each end
- 11.5" x 11.5" octagonal sign is printed on 0.055" polyethylene plastic
- Fits 22" to 38" outside bolt-to-bolt*
- Crossbucks available in two materials: - Standard style is 0.060" polycarbonate plastic – durable to withstand initial impacts and scratches - Heavy-Duty style is 0.118" Poly-Aluminum – combines aluminum and thermoplastic core for high strength and impact protection * To verify proper fit of the barrier for your entryway, measure the length across the entryway from bolt to bolt; then measure the bolt diameter and compare to slot width. Plastic PCSP0006 Poly-Aluminum PCSP0009 Plastic PCSP0007 Poly-Aluminum PCSP0010 Plastic PCSP0008 Poly-Aluminum PCSP0011 Plastic PCSP0012 Poly-Aluminum PCSP0013 Description Material UOM Standard Plastic Each Heavy-Duty Poly-Aluminum Mark confined spaces that are otherwise difficult to label by using ink or paint stencils.
- 0.010" thermo-plastic stencils
- Fits a 7" x 10" image area
- Header line has approx. 2" H letters
- Message area has 1" H letters Permit Holder Board Entry Permit Pad Stencils UOM Each 7" x 10" PCSP0003 7" x 10" PCSP0004 7" x 10" PCSP0005 Board communicates confined space requirements and holds related permits.
- Hang or set board near or at entrance of confined space to be readily seen by all
- Features large sign legend with clear acrylic pocket
- Holds 8.5" x 11" entry permit sheets (available separately)
- Constructed of durable 0.125" thick PVC
- Measures 12"H x 19"W with mounting holes
- Not recommended for outdoor use
- Easy to write on, 8.5" x 11" sheets
- Conveniently packaged in easy to tear off pads
- 100 sheets per pad Comply with OSHA 29 CFR § 1910.146(e)(1) Part No. UOM PCSP0002 100 Sheets/Pad Part No. UOM PCSP0001 Each
Safety Signs & Labels 800.777.3300 | Panduit.com CONSTRUCTION AREA 14" x 10" D4136 7" x 10" 10" x 14" D7119 14" x 10" D4015 7" x 10" 10" x 14" D7120 Construction Crane and Construction Signals Signs 7" x 10" 10" x 14" D7121 7" x 10" 10" x 14" D7122 7" x 10" 10" x 14" D7123 7" x 10" 10" x 14" D7124 7" x 10" 10" x 14" D7125 7" x 10" 10" x 14" D7126 7" x 10" 10" x 14" D7127 7" x 10" 10" x 14" D7128 7" x 10" 10" x 14" C7129 10" x 14" D4017 Choose from Standard, Mobile and Overhead Crane Signal Styles, as well as Ready Mix Truck Signals Style. Available as wallet cards, labels, and signs. Select styles also available as laminated, durable, flexible plastic posters. MobileStandard Overhead Ready Mix Overhead Crane Hand Signals Source: ANSI/ASME B30.5-2007 - Mobile and Locomotive Cranes, Section 5-3.3: Signals Crane Hand Signals Truck Signals 29 CFR § 1926.1422 Signals – Hand Signal Chart. Hand signal charts must be either posted on the equipment or conspicuously posted in the vicinity of the hoisting operations. Description UOM Wallet Card, 2-sided Each Wallet Card, 1-sided Plastic Wallet Card – 3 3/8" x 2 1/8" Description UOM Label Pkg. of 5 Label - Adhesive Vinyl (PVS) 5" x 3 1/2" (0503) Description UOM Sign Each Sign (see How to Order Signs above box) Standard (2-sided) PSS027 Mobile (2-sided) PSS028 Overhead (1-sided) PSS026 Ready Mix (1-sided) PSS029 Standard B3507 Mobile B3552 Overhead B3546 Standard B4542 Mobile B4547 Overhead B5616 Ready Mix B4513 Available size 14" x 10" (1410) only To Order Labels: Select Material Code, Size Code, & Base Part Number. Combine Codes in Specific Order for Complete Part Number Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710D71254Select Sign Base Part Number: D71253
Safety Signs & Labels Large Signs 18" x 24" 24" x 36" D7334 18" x 24" 24" x 36" D7335 18" x 24" 24" x 36" D7338 18" x 24" 24" x 36" B7342 18" x 24" 24" x 36" D7337 18" x 24" 24" x 36" B7341 18" x 24" 24" x 36" D7336 18" x 24" 24" x 36" B7340 18" x 24" 24" x 36" B7344 24" x 18" B4505 18" x 24" 24" x 36" D7339 18" x 24" 24" x 36" B7343 Mark pathways, warn of hazards, and display safety reminders in a big way around the construction site with these large signs. On an active job site, signs with bold messages and large letters are visible to gain the necessary attention from varying distances. Available Sizes Codes 18" x 24" 1824 24" x 18" 2418 24" x 36" 2436 Available Materials Codes Adhesive Vinyl (Each) PVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS How to Order Signs: Select Material Code: PVS1 Select Size Code: 18242 Select Label Sign Part Number: D73363 Combine Codes in Specific Order for Complete Part Number: PVS1824D73364
Safety Signs & Labels 800.777.3300 | Panduit.com Electrical Signs Roll of Signs Keep multiple safety signs for on-the-spot placement.
- Convenient, portable and economical
- 7" x 10" signs are surface-printed on 0.004" vinyl with permanent acrylic adhesive back
- Matte material is moisture-resistant
- Compact roll protects additional sign versions underneath
- Simply peel-and-stick; adheres to most surfaces
- Available in two roll size options: 50 per roll and 100 per roll 50 / Roll PVS0710W4025-L 100 / Roll PVS0710W4025-C 50 / Roll PVS0710C4029-L 100 / Roll PVS0710C4029-C 50 / Roll PVS0710D4019-L 100 / Roll PVS0710D4019-C Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710D71304Select Sign Base Part Number: D71303 7" x 10" 10" x 14" D7130 7" x 10" 10" x 14" D7131 7" x 10 10" x 14" D7132 7" x 10" 10" x 14" D7133 14" x 10" D4115 14" x 10" D4012 7" x 10" 10" x 14" D7135 14" x 10" D4188 7" x 10" 10" x 14" D7136 7" x 10" 10" x 14" D7137 7" x 10" 10" x 14" D7134 7" x 10" 10" x 14" D7142 7" x 10" 10" x 14" D7143 7" x 10" 10" x 14" D7144 7" x 10" 10" x 14" D7145 7" x 10" 10" x 14" D7146 7" x 10" 10" x 14" W7138 7" x 10" 10" x 14" W7139 7" x 10" 10" x 14" C7140 7" x 10" 10" x 14" C7147 7" x 10" 10" x 14" N7141 DANGERDANGER PANDUIT PPS0305D72 HIGH VOLTAGE PVS0109D72Y PVS0204D72Y PVS0204D72Y PVS0305C174Y PVS0505C174Y PPS0305C174 PVS0710C173Y PVS0209D445Y PVS0204C171Y PVS0710C180Y THE FOLLOWING STEPS MUST BE PERFORMED WHEN LOCKING OUT EQUIPMENT: 1 - Identify all potential hazards and energy sources. 2 - Inform operator / supervisor about work to be performed. 3 - Prepare equipment for shutdown. 4 - Shutdown / turn off equipment. 5 - Isolate and LOCKOUT energy sources. 6 - Release all stored energy. 7 - Test equipment for zero energy state. 8 - Clear personnel / tools before and after job. 9 - Remove locks and tags when work completed. PVS0503N458Y LOCK OUT BEFORE SERVICING PVS0204C176Y PVS0204C179Y DANGER VOLTS PANDUIT PPS1014D28 PPS0710D28 DANGER ELECTRICAL EQUIPMENT AUTHORIZED PERSONNEL ONLY PANDUIT PPS1014D71 PRS1014D71 DANGER HIGH VOLTAGE UNAUTHORIZED PERSONNEL KEEP OUT PANDUIT PPS1014D75 PRS1420D75 PRS0910D453 LOCK OUT HERE PVS0204C177Y PVS0204C178Y DANGER AREA IN FRONT OF THIS ELECTRICAL PANEL MUST BE KEPT CLEAR FOR
36 INCHES OSHA - NEC REGULATIONS
RISK OF FIRE OR ELECTRIC SHOCK The opening of the branch-circuit protective device may be an indication that a fault current has been interrupted. All current carrying parts and other componenets protected by this device should be examined and replaced if damaged. If burnout of a current element of an overload relay occurs, the complete overload relay must be replaced. SHORT CIRCUIT CURRENT kA; VMAX PANDUIT PVS0305W2201Y PPS0305W2201Y PPS0507W2201Y
Safety Signs & Labels Arc Flash Protection Labels Post labels clearly identifying electrical hazards to protect workers from arc flash, shock and electrocution.
- Bold type and graphics to be clearly seen
- Labels define specifics of electrical hazards and appropriate PPE D7156 D7157 Incident Energy at 18 inches (cal/cm2): Arc Flash Hazard Boundary: PPE Minimum Arc Rating (cal/cm2): Hazard Risk Category (HRC): Nominal System Voltage: Equipment ID: Date of Assessment: Required Level of PPE: W7158 W7161 W7160 W7159 Incident Energy at 18 inches (cal/cm2): Arc Flash Hazard Boundary: PPE Minimum Arc Rating (cal/cm 2): Hazard Risk Category (HRC): Nominal System Voltage: Equipment ID: Date of Assessment: Required Level of PPE: W7162 W7163 W7164 Labels How to Order: Select Material Code: PVMS1 Select Size Code: 05032 Select Label Base Part Number: D31203 Combine Codes in Specific Order for Complete Part Number: PVMS0503D31204 Available Material Code Magnetic Vinyl (Each) PVMS Available Sizes Codes 5" x 3 1/2" 0503 7" x 5" 0705 How to Order Labels: Select Material Code: PLVS1 Select Size Code: 05072 Select Label Base Part Number: W71623 Combine Codes in Specific Order for Complete Part Number: PLVS0507W71624 Available Materials Codes Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 5" x 7" 0507 Magnetic Lockout Label Apply, move, and re-apply to most steel surfaces when servicing equipment. D3120 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 3 1/2" x 5" 0305 6" x 2" 0602 5" x 7" 0507 Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: D71493 Combine Codes in Specific Order for Complete Part Number: PVS0305D71494 D7149 D7153 3 1/2" x 5" D3164 3 1/2" x 5" D3168 3 1/2" x 5" D3177 3 1/2" x 5" B3541 With Detached Arrow 3 1/2" x 5" C3622 D7148 D7152 3 1/2" x 5" D3161 3 1/2" x 5" D3166 3 1/2" x 5" D3176 3 1/2" x 5" D3297 D7150 D7154 3 1/2" x 5" D3165 3 1/2" x 5" D3170 3 1/2" x 5" D3178 3 1/2" x 5" B3512 3 1/2" x 5" D3306 3 1/2" x 5" B3530 D7151 D7155 3 1/2" x 5" D3167 3 1/2" x 5" D3175 6" x 2" B3536 How to Order:
Safety Signs & Labels 800.777.3300 | Panduit.com Voltage and Fiber Optic Markers
- Available in adhesive-backed vinyl and pre-coiled polyester to protect legend with excellent life and adhesion properties
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Black on orange labels provide a highly visible warning for electrical hazards
- Temperature Range: -40° to 250°F Part No. Legend PCV-110 110 VOLTS PCV-115 115 VOLTS PCV-120/208 120/208 VOLTS PCV-120 120 VOLTS PCV-12470 12470 VOLTS PCV-13200 13200 VOLTS PCV-13800 13800 VOLTS PCV-1PH SINGLE PHASE PCV-208 208 VOLTS PCV-220 220 VOLTS PCV-2300 2300 VOLTS Part No. Legend PCV-230 230 VOLTS PCV-2400 2400 VOLTS PCV-240 240 VOLTS PCV-277/480 277/480 VOLTS PCV-277 277 VOLTS PCV-380 380 VOLTS PCV-3PH THREE PHASE PCV-415 415 VOLTS PCV-4160 4160 VOLTS PCV-440 440 VOLTS PCV-460 460 VOLTS Part No. Legend PCV-480 480 VOLTS PCV-600 600 VOLTS PCV-BLANK BLANK – NO LEGEND PCV-ES EMERGENCY SERVICE PCV-FA FIRE ALARM PCV-FO FIBER OPTIC PCV-FOC FIBER OPTIC CABLE PCV-MAIN MAIN PCV-TELE TELEPHONE Style M Part No. Style R Part No. Legend – PCV-120 120 Volts – PCV-480 480 Volts PCV-FO PCV-FO Fiber Optic To Order Adhesive-Backed: Add size code after part number. Available sizes AY, BY, CY. To Order Pre-Coiled: Add size code after part number. Available sizes MY, RY. Voltage Marker Books
- Black on orange labels provide a highly visible warning for electrical hazards
- Indoor rated economical general purpose vinyl
- Excellent adhesion properties when applied to a clean, dry surface
- Temperature Range: -40° to 200°F Part No. Legend PCVB-110Y 110 VOLTS PCVB-220Y 220 VOLTS PCVB-277Y 277 VOLTS PCVB-277/480Y 277/480 VOLTS PCVB-440Y 440 VOLTS PCVB-480Y 480 VOLTS PCVB-4160Y 4160 VOLTS Marker Size Markers/ Page Markers/ Book 1.5"H x 3.25"W 3 30 ISO Warning Symbol Labels Paper
- Indoor rated general purpose
- Excellent adhesion properties when applied to a clean, dry surface
- Temperature Range: -65° to 200°F Part No. Description Size Labels Per Roll WL1 STATIC AWARENESS WARNING 2" x 2" 500WL3 WL1 WL3 Vinyl
- Laminated label material protects legend from abrasion and chemicals
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Excellent life and adhesion properties
- Temperature Range: -40° to 176°F WL33Y Size Code Marker Size Pipe/Conduit O.D. Range Markers Per Card Cards/ Pkg. Total Markers AY 2.25"H x 9"W 3" and Over 1 BY 1.13"H x 4.5"W 1.25" – 3" 4 20 CY 0.5"H x 2.2"W 1.25" – Under 18 90 Adhesive-Backed Vinyl Markers Size Code Marker Size Pipe/Conduit O.D. Range Markers Per Card Cards/ Pkg. Total Markers MY 23"H x 14"W 2.25" – 6" 1 1 1 Pre-Coiled Poly Markers How to Order: Select Legend Code: PCV-1101 Select Size Code: 2.25"H x 9"W – AY2 Combine Codes in Specific Order for Complete Part Number: PCV-110AY3 Part No. Description Size Labels Per Roll WL32Y RISK OF ELECTRIC SHOCK symbol 1.5” x 1.5” WL33Y 4.5" x 4.5" WL35Y 2.0” x 2.0” WL36Y 2.0” x 2.0”
Safety Signs & Labels Electrical Labels in Dispenser
- Laminated polyester label protects legend from abrasion and chemicals
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Excellent life and adhesion properties
- Temperature Range: -40° to 250°F
- 200* labels/dispenser *PLD-57, 300 labels/dispenser *PLD-60, 100 labels/dispenser *PLD-71, 150 labels/dispenser 1" x 1.5" PLD-74 1" x 1.5" PLD-80 1" x 1.5" PLD-81 1" x 1.5" PLD-91 1" x 3" PLD-60* 1.5" x 1" PLD-67 1" x 1.5" PLD-68 1" x 2" PLD-71* 1" x 1.5" PLD-72 1" x 1.5" PLD-58 1" x 1.5" PLD-30 1" x 1.5" PLD-38 1" x 1.5" PLD-43 1" x 1.5" PLD-12 120 V 1" x 1.5" PLD-36 220 V 1" x 1.5" PLD-37 1" x 1.5" PLD-56 .75" dia. PLD-57* 1" x 1.5" PLD-52 230 V 1" x 1.5" PLD-45 1" x 1.5" PLD-46 277/480 V 1" x 1.5" PLD-47 Conductor Identification Labels
- Pre-printed polyester laminated label protects legend from abrasion and chemicals
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Excellent life and adhesion properties
- Temperature Range: -40° to 250°F
- Package of 10 sheets
- Pre-printed black on yellow with adhesive back vinyl cloth
- Conformable material with repositionable adhesive allows label to be removed and reused or used in temporary applications
- Indoor/outdoor rated for durability, high temperature resistance, and dimensional stability for rough or textured surfaces
- Temperature Range: -50° to 170°F
- Packages of 10 cards How to Order: Material Code: PESC-1 Select Size Code: 1/2" – H-2 Select Symbol Code: – AT3 Combine Codes in Specific Order for Complete Part Number: PESC-H-AT4 Size Code Label Size Labels/Card Pkg. Qty. H 0.5" x 0.5" 68 680 J 0.75" x 0.75" 36 360 CE CE symbol Size: A, B, C, D, E How to Order: Material Code: PESS-1 Select Size Code: .49" – A-2 Select Symbol Code: – CE3 Combine Codes in Specific Order for Complete Part Number: PESS-A-CE4 Size Code Label Size Diameter Labels/Sheet Pkg. Qty. A 0.49" 20 200 B 0.63" C 0.79 10 100D 0.98" E 1.24" ES Earth (ground) Size: A, B, C, D, E Outer conductor Size: A, B, C, D, E Outer conductor 2 Size: A, B, C, D, E Outer conductor 2 Size: A, B, C, D, E LF Lead free symbol Size: A N Neutral conductor Size: A, B, C, D PE Protective conductor Size: A ROHS RoHS wheeled bin symbol Size: A SS Safety function Size: A, B, C, D Electrical Symbol Labels on Cards AT Warning of dangerous electrical voltage E Earth (ground) EC Safety function PE Protective conductor HT Static sensitive device – handling precautions required
Safety Signs & Labels 800.777.3300 | Panduit.com Equipment Signs 7" x 10" 10" x 14" D7165 7" x 10" 10" x 14" D7166 14" x 10" D4021 7" x 10" 10" x 14" D7167 7" x 10" 10" x 14" D7168 14" x 10" D4139 7" x 10" 10" x 14" D7169 14" x 10" D4177 7" x 10" 10" x 14" D7170 7" x 10" 10" x 14" D7171 7" x 10" 10" x 14" D7172 7" x 10" 10" x 14" W7173 7" x 10" 10" x 14" W7174 7" x 10" 10" x 14" C7175 14" x 10" C4722 7" x 10" 10" x 14" C7176 7" x 10" 10" x 14" C7177 7" x 10" 10" x 14" C7178 7" x 10" 10" x 14" C7179 7" x 10" 10" x 14" C7180 7" x 10" 10" x 14" C7181 Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710D71654Select Sign Base Part Number: D71653
Safety Signs & Labels Labels 3 1/2" x 5" D3019 1 1/2" x 3" D3018 1 1/2" x 3" D30203 1/2" x 5" D3280 3 1/2" x 5" D3148 3 1/2" x 5" D3145 3 1/2" x 5" D3284 3 1/2" x 5" D3304 3 1/2" x 5" D3132 3 1/2" x 5" B3927 3 1/2" x 5" D3134 3 1/2" x 5" B3923 4" x 7" D3114 3" x 7" D3036 5" x 7" W3658 4" x 7" D3035 5" x 7" C3655 3 1/2" x 5" D3156 With Detached Arrow 3 1/2" x 5" C3799 3 1/2" x 5" C3686 3 1/2" x 5" C3791 3 1/2" x 5" C3793 3 1/2" x 5" D3290 3 1/2" x 5" D3155 With Detached Arrow California Code of Regulations, Title 8, Section 2946, Article 37 Fire & Emergency Signs 10" x 7" 14" x 10" D7207 7" x 10" 10" x 14" C7197 7" x 10" 10" x 14" N7190 10" x 14" B4551 10" x 14" B4552 10" x 14" B4512 Production Control Labels in Dispenser
- Laminated polyester label protects legend from abrasion and chemicals
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Excellent life and adhesion properties
- Temperature Range: -40° to 250°F
- Can be clearly identified with Panduit permanent marking pens 1" x 1.5" PLD-11 1" x 1.5" PLD-22 1" x 1.5" PLD-28 1" x 1.5" PLD-29 0.75" dia. PLD-62 0.75" dia. PLD-63 0.75" dia. PLD-64 0.75" dia. PLD-77 0.75" dia. PLD-78 1" x 1.5" PLD-17 1" x 1.5" PLD-18 1" x 1.5" PLD-3 1" x 1.5" PLD-4 1" x 1.5" PLD-7 Shape Size Labels/ Dispenser Rectangle 1" x 1.5" 200 Circle 0.75" dia. 300 Production Control Labels on Cards
- Conformable vinyl cloth with repositionable adhesive allows label to be removed and reused or used in temporary applications
- Indoor/outdoor rated provides durability, high temperature resistance, and dimensional stability for rough or textured surfaces
- Temperature Range: -50° to 170°F
- Package of 25 cards
- Can be clearly identified with Panduit permanent marking pens Labels/Card Total Labels 14 350 0.63" x 1.5" PCWL-BL Blank White 0.63" x 1.5" PCWL-ACC Accepted 0.63" x 1.5" PCWL-CAL Calibration 0.63" x 1.5" PCWL-CALD Calibrated 0.63" x 1.5" PCWL-ICAL Calibration 0.63" x 1.5" PCWL-REJ Rejected How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: D33043 Combine Codes in Specific Order for Complete Part Number: PVS0305D33044 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 1 1/2" x 3" 0103 3 1/2" x 5" 0305 3" x 7" 0307 4" x 7" 0407 5" x 7" 0507
Safety Signs & Labels 800.777.3300 | Panduit.com Column Markers Adhesive Vinyl (12" x 24") PVS1224B3437 Glow Adhesive (12" x 24") PVS1224B3505 Material UOM Adhesive Vinyl Each Glow Adhesive 7" x 10" 10" x 14" B7187 7" x 10" 10" x 14" B7192 10" x 7" 14" x 10" B7194 10" x 7" 14" x 10" B7196 10" x 7" 14" x 10" B7193 10" x 7" 14" x 10" B7208 14" x 10" B4519 7" x 10" 10" x 14" B7195 7" x 10" 10" x 14" B7205 7" x 10" 10" x 14" B7188 10" x 7" 14" x 10" B7191 7" x 10" 10" x 14" B7189 18" x 4" B4585 12" x 4" 18" x 4" 24" x 4" B7202 18" x 4" B4581 12" x 4" 18" x 4" 24" x 4" B7210 18" x 4" B4935 18" x 4" 24" x 4" B7211 7" x 10" 10" x 14" B7182 7" x 10" 10" x 14" B7183 7" x 10" 10" x 14" B7184 7" x 10" 10" x 14" B7185 7" x 10" 10" x 14" B7186 7" x 10" 10" x 14" B7199 7" x 10" 10" x 14" B7200 10" x 7" 14" x 10" B7209 7" x 10" 10" x 14" B7201 7" x 10" 10" x 14" B7203 7" x 10" 10" x 14" B7204 7" x 10" 10" x 14" B7206 Available Sizes Codes 7" x 10" 0710 10" x 7" 1007 10" x 14" 1014 14" x 10" 1410 12" x 4" 1204 18" x 4" 1804 24" x 4" 2404 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710B71824Select Sign Base Part Number: B71823
Safety Signs & Labels 3 1/2" x 5" B3550 B3449 B3440 B3526 B3445 5" x 3 1/2" B3539 ’16 ’17 ’18 ’19 2" x 14" B3452 3" x 7" B3431 Labels First Aid Signs 7" x 10" 10" x 14" S7213 7" x 10" 10" x 14" S7212 7" x 10" 10" x 14" S7214 10" x 7" 14" x 10" B7221 10" x 7" 14" x 10" B7223 10" x 7" 14" x 10" B7222 7" x 10" 10" x 14" B7225 10" x 7" 14" x 10" B7224 7" x 10" 10" x 14" B7228 14" x 10" B4503 7" x 10" 10" x 14" B7227 7" x 10" 10" x 14" B7229 14" x 10" B4502 7" x 10" 10" x 14" B7217 14" x 10" B4508 7" x 10" 10" x 14" B7218 10" x 7" 14" x 10" B7219 7" x 10" 10" x 14" B7220 Labels 3 1/2" x 5" B3531 3" x 7" B3521 3 1/2" x 5" B3915 3" x 7" B35193 1/2" x 5" 5" x 7" B7230 6" x 5" B3532 17" x 7" B4997 How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: B35503 Combine Codes in Specific Order for Complete Part Number: PVS0305B35504 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 3 1/2" x 5" 0305 5" x 3 1/2" 0503 3" x 7" 0307 5" x 7" 0507 2" x 14" 0214 How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: B35313 Combine Codes in Specific Order for Complete Part Number: PVS0305B35314 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 3 1/2" x 5" 0305 3" x 7" 0307 6" x 5" 0605 5" x 7" 0507 See How to Order Signs on next page
Safety Signs & Labels 800.777.3300 | Panduit.com Housekeeping & Hygiene Signs – Adhesive Vinyl (PVS) and Polyethylene Plastic (PRS) 7" x 10" 10" x 14" C7231 7" x 10" 10" x 14" C7232 7" x 10" 10" x 14" C7233 14" x 10" C4643 7" x 10" 10" x 14" C7234 7" x 10" 10" x 14" C7235 7" x 10" 10" x 14" C7236 7" x 10" 10" x 14" C7237 14" x 10" C4663 7" x 10" 10" x 14" N7264 7" x 10" 10" x 14" N7265 7" x 10" 10" x 14" N7266 7" x 10" 10" x 14" N7238 14" x 10" N4804 7" x 10" 10" x 14" N7242 7" x 10" 10" x 14" N7243 14" x 10" N4814 7" x 10" 10" x 14" S7239 7" x 10" 10" x 14" B7240 7" x 10" 10" x 14" B7241 7" x 10" 10" x 14" B7267 7" x 10" 10" x 14" B7268 14" x 10" B4944 7" x 10" 10" x 14" B7269 14" x 10" B4974 7" x 10" 10" x 14" B7245 14" x 10" B4586 7" x 10" 10" x 14" B7244 7" x 10" 10" x 14" B7271 7" x 10" 10" x 14" B7270 Available Sizes Codes 7" x 10" 0710 10" x 7" 1007 10" x 14" 1014 14" x 10" 1410 17" x 7" 1707 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710S72134Select Sign Base Part Number: S72133
Safety Signs & Labels Signs – Adhesive Vinyl (PVS) and Polyethylene Plastic (PRS) continued 7" x 10" 10" x 14" B7250 7" x 10" 10" x 14" B7251 7" x 10" 10" x 14" B7252 7" x 10" 10" x 14" B7253 7" x 10" 10" x 14" B7254 7" x 10" 10" x 14" B7257 7" x 10" 10" x 14" B7258 7" x 10" 10" x 14" B7259 7" x 10" 10" x 14" B7260 7" x 10" 10" x 14" B7261 10" x 7" 14" x 10" B7262 10" x 7" 14" x 10" B7263 4" x 12" B3511 4" x 12" B3510 4" x 12" B5531 3" x 10" B4557 3" x 10" B4559 3" x 10" B4563 14" x 10" B4521 14" x 10" B5624 14" x 10" B4578 14" x 10" B4575 14" x 10" B4576 14" x 10" B4529 Labels – Adhesive Vinyl (PVS) 3 1/2" x 5" C3612 3 1/2" x 5" B3920 2" x 6" B3504 3" x 7" B3518 3" x 7" B3528 3 1/2" x 5" B3523 3 1/2" x 5" B3520 3 1/2" x 5" B3503 3 1/2" x 5" B3538 3 1/2" x 5" B3540 3 1/2" x 5" B3529 3 1/2" x 5" B3535 3 1/2" x 5" N3817 2" x 6" C3621 3 1/2" x 5" B3506 2" x 12" B3522 3 1/2" x 5" B3524 7" x 10" 10" x 14" B7246 7" x 10" 10" x 14" B7247 7" x 10" 10" x 14" B7248 7" x 10" 10" x 14" B7249 7" x 10" 10" x 14" B7255 7" x 10" 10" x 14" B7256 How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: B35293 Combine Codes in Specific Order for Complete Part Number: PVS0305B35294 Available Material Code Adhesive Vinyl (Pkg. of 5) PVS Available Sizes Codes 2" x 6" 0206 3 1/2" x 5" 0305 3" x 7" 0307 2" x 12" 0212 See How to Order Signs on next page
Safety Signs & Labels 800.777.3300 | Panduit.com Personal Protection Signs 7" x 10" 10" x 14" D7272 14" x 10" D4106 7" x 10" 10" x 14" D7273 7" x 10" 10" x 14" D7274 7" x 10" 10" x 14" D7275 7" x 10" 10" x 14" D7276 7" x 10" 10" x 14" D7277 7" x 10" 10" x 14" C7278 14" x 10" C4683 7" x 10" 10" x 14" C7279 7" x 10" 10" x 14" C7280 14" x 10" C4627 7" x 10" 10" x 14" C7281 7" x 10" 10" x 14" C7282 7" x 10" 10" x 14" C7283 7" x 10" 10" x 14" C7284 14" x 10" C4756 7" x 10" 10" x 14" N7285 7" x 10" 10" x 14" N7286 7" x 10" 10" x 14" N7287 Labels 3 1/2" x 5" D3307 3 1/2" x 5" C3618 3 1/2" x 5" D3298 3 1/2" x 5" C3623 3 1/2" x 5" C3617 How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: D32983 Combine Codes in Specific Order for Complete Part Number: PVS0305D32984 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Size Code 3 1/2" x 5" 0305 Available Sizes Codes 3" x 10" 0310 4" x 12" 0412 7" x 10" 0710 10" x 7" 1007 10" x 14" 1014 14" x 10" 1410 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710B72464Select Sign Base Part Number: B72463
Safety Signs & Labels Display your skill or commitment to safety in a personal way. Adhesive vinyl 2.25" dia. labels are flexible to conform to the curve of a hard hat. Package of 10. Hard Hat Labels / Helmet Decals Flag Helmet Stickers Show personal country pride. Adhesive vinyl label has permanent adhesive back with peel-off liner. USA Part No. Canada Part No. Mexico Part No. Size Std. Pkg. Qty. PHL3377 PHL3402 PHL3386 1" x 1 3/4" PHL3212 PHL3404 PHL3388 1 1/2" x 3" PHL3354 PHL3355PHL3343 PHL3351PHL3361 PHL3347PHL3381 PHL3345 PHL3125 PHL3317PHL3163 PHL3204PHL3165 PHL3188PHL3365 PHL3315PHL3358 PHL3359 PHL3323PHL3357 PHL3126 PHL3132 PHL3619 PHL3632 PHL3649 Reflective (Each) Standard Smoking Control Signs 7" x 10" 10" x 14" N7296 7" x 10" 10" x 14" B7292 7" x 10" 10" x 14" B7293 7" x 10" 10" x 14" B7288 7" x 10" 10" x 14" B7289 7" x 10" 10" x 14" B7290 7" x 10" 10" x 14" B7295 10" x 7" 14" x 10" B7294 7" x 10" 10" x 14" B7300 7" x 17" B4533 7" x 17" B4501 4" x 12" B4531 7" x 17" B4526 7" x 5" 10" x 7" B7291 7" x 5" 10" x 7" B7297 7" x 5" 10" x 7" B7298 7" x 5" 10" x 7" B7301 7" x 5" 10" x 7" B7302 7" x 5" 10" x 7" B7299 7" x 5" 10" x 7" B7303 See How to Order Signs on next page
Safety Signs & Labels 800.777.3300 | Panduit.com Labels 3" x 7" B3589 B7304 1 1/2" x 3" B3515 1 1/2" x 3" B3514 Traffic Industrial Signs 7" x 10" 10" x 14" D7321 7" x 10" 10" x 14" W7305 7" x 10" 10" x 14" C7322 7" x 10" 10" x 14" C7307 14" x 10" C5662 7" x 10" 10" x 14" C7308 7" x 10" 10" x 14" C7309 7" x 10" 10" x 14" C7310 7" x 10" 10" x 14" C7311 7" x 10" 10" x 14" C7312 7" x 10" 10" x 14" C7313 7" x 10" 10" x 14" C7314 14" x 10" C4604 14" x 10" C4601 7" x 10" 10" x 14" C7315 7" x 10" 10" x 14" C7306 14" x 10" N4816 7" x 10" 10" x 14" N7316 7" x 10" 10" x 14" N7317 7" x 10" 10" x 14" N7318 7" x 10" 10" x 14" N7319 7" x 10" 10" x 14" N7320 How to Order Labels: Select Material Code: PVS1 Select Size Code: 01012 Combine Codes in Specific Order for Complete Part Number: PLVS0101B73044Select Label Base Part Number: B73043 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Sizes Codes 1 1/2" x 1 1/2" 0101 1 1/2" x 3" 0103 4" x 4" 0404 3" x 7" 0307 Available Sizes Codes 4" x 12" 0412 7" x 5" 0705 7" x 10" 0710 10" x 7" 1007 10" x 14" 1014 14" x 10" 1410 7" x 17" 0717 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 07102 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS0710B72884Select Sign Base Part Number: B72883
Safety Signs & Labels Labels 3 1/2" x 5" C3613 3 1/2" x 5" B3562 3 1/2" x 5" B3576 3 1/2" x 5" B3527 3 1/2" x 5" B3571 3 1/2" x 5" B3525 2" x 5" B3543 2" x 5" B3557 2" x 5" B3549 2" x 5" B3565 2" x 5" B3559 2" x 5" B3567 2" x 5" B3569 2" x 5" B3545 Bright, attention-getting signs for cross traffic areas.
- Highly visible fluorescent red-orange or lime-yellow
- Durable 0.060" plastic
- Pre-drilled mounting holes
- For indoor use only 24" x 18" PSSFB4057 24" x 18" PSSFB4059 18" x 12" PSSFC4038 18" x 12" PSSFC4040 18" x 12" PSSFC4034 18" x 12" PSSFC4036 Fluorescent Alert Signs Labels – Polyester Laminated Vinyl (PLVS) How to Order Labels: Select Material Code: PVS1 Select Size Code: 03052 Select Label Base Part Number: B35623 Combine Codes in Specific Order for Complete Part Number: PVS0305B35624 Available Materials Codes Adhesive Vinyl (Pkg. of 5) PVS Polyester Laminated Vinyl (Each) PLVS Available Size Code 3 1/2" x 5" 0305 How to Order Labels: Select Material Code: PLVS1 Select Size Code: 02052 Select Label Base Part Number: B35453 Combine Codes in Specific Order for Complete Part Number: PLVS0205B35454 Available Material Code Polyester Laminated Vinyl (Each) PLVS Available Size Code 2" x 5" 0205 24" x 18" PSSFB4055
Safety Signs & Labels 800.777.3300 | Panduit.com Vinyl Cloth Letters and Numbers Markers
- Contrasting colors for easy visibility
- Thin conformable material with repositionable adhesive allows label to be removed and reused
- Indoor/outdoor rated provides durability, high temperature resistance and dimensional stability for rough or textured surfaces
- Black on yellow characters
- Temperature Range: -50° to 170°F How to Order: Refer to Part Number (No.): 0.38" – PCL037-*1 Specify Character Legend A thru Z, 0 thru 9, – (dash) for Asterisk (*): PCL037-A2 Part No. Character Height Marker Size Markers/Card Cards/Pkg. PCL037-* 0.38" 0.50"H x 0.34"W 78 PCL062-* 0.63" 0.75"H x 0.56"W 32 Individual Letter and Number Markers Part No. Series Character Height Marker Size Markers/ Card Cards/ Pkg. PCL037-0-9 0 thru 9 0.38" 0.50"H x 0.34"W 78 PCLCP037-0-9 1 PCL062-0-9 0 thru 9 0.63" 0.75"H x 0.56"W 32 PCLCP062-0-9 1 PCL100-0-9 0 thru 9 1" 1.5"H x 0.88"W 10 PCLCP100-0-9 1 PCL200-0-9 0 thru 9 2" 2.25"H x 0.88"W 10 PCLCP200-0-9 1 PCLCP300-0-9 0 thru 9 3" 3.5"H x 1.5"W 6 1 Consecutive Number Marker Sets Part No. Series Character Height Marker Size Markers/ Card Cards/ Pkg. PCL037-A-Z A thru Z 0.38" 0.50"H x 0.34"W 78 PCLCP037-A-Z 1 PCL062-A-Z A thru Z 0.63" 0.75"H x 0.56"W 32 PCLCP062-A-Z 1 PCL100-A-J A thru J 1" 1.5"H x 0.88"W 10 25PCL100-K-T K thru T PCL100-U-Z U thru Z PCLCP100-A-Z A thru Z 1" 1.5"H x 0.88"W 10 1 PCL200-A-J A thru J 2" 2.25"H x 0.88"W 10 25PCL200-K-T K thru T PCL200-U-Z U thru Z PCLCP200-A-Z A thru Z 2" 2.25"H x 0.88"W 10 1 PCLCP300-A-Z A thru Z 3" 3.5"H x 1.5"W 6 1 Consecutive Letter Marker Sets Reflective Vinyl Letters and Numbers Markers
- Contrasting black and yellow visibility
- Heavy-duty reflective vinyl with adhesive back flat applications for safety and facility identification
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere, and abrasion
- Temperature Range: -30° to 200°F How to Order: Refer to Part Number (No.): 1" – PRL100BY-*1 Specify Character Legend A thru Z, 0 thru 9, – (dash) for Asterisk (*): PRL100BY-A2 Part No. Character Height Marker Size Color Character on Background Markers/ Card PRL100BY-* 1" 1.63"H x 1"W Black on Yellow 25PRL150YB-* 1.50" 1.88"H x 1.38"W Yellow on Black PRL250YB-* 2.50" 2.88"H x 1.75"W Individual Letter and Number Markers Part No. Series Character Height Marker Size Color Character on Background Markers/ Card PRL100BY-18KIT 0 thru 9, A thru D, L, P , R, S 1" 1.63"H x 1"W Black on Yellow 900 PRL100BY-36KIT 0 thru 9, A thru Z 950 Consecutive Letter and Number Marker Sets Vinyl Letter and Number Markers
- Indoor/outdoor rated conformable heavy duty adhesive back vinyl for flat applications
- Resistant to UV light, chemical atmosphere and abrasion
- Black on yellow characters for visible safety and facility identification
- Temperature Range: -50° to 225°F How to Order: Refer to Part Number (No.): 1" – PVL100BY-*-Y1 Specify Character Legend A thru Z, 0 thru 9, – (dash) for Asterisk (*): PVL100BY-A-Y2 Part No. Character Height Label Size Markers/ Card Cards/ Pkg. Total Markers PVL100BY-*-Y 1" 1.5"H x 0.88"W 10 25 250 PVL200BY-*-Y 2" 2.25"H x 0.88"W
Safety Signs & Labels ANSI ISO Safety Signs 10" x 14" D4107 10" x 14" D4105 10" x 14" D5107 10" x 14" D5113 10" x 14" D4104 Men working above. 10" x 14" D4108 10" x 14" D4009 10" x 14" D4081 10" x 14" D4113 10" x 14" W4303 10" x 14" W4307 10" x 14" W4308 10" x 14" W4312 Look out for forklifts. 10" x 14" W4305 10" x 14" C4647 10" x 14" C4644 10" x 14" C4603 10" x 14" C5643 10" x 14" N4809 10" x 14" N4805 10" x 14" N4825 EMERGENCY 10" x 14" B4913 EMERGENCY 10" x 14" B7226 10" x 14" B4509 ISO Warning Symbols Use internationally recognized symbols for hazard warning and identification
- International Organization for Standardization (ISO) labels communicate safety without words
- Warning-shaped triangles with symbols to communicate hazard message
- Made of self-adhesive vinyl with durable overlaminate Available Size Code 10" x 14" 1014 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 10142 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS1014D41074Select Sign Base Part Number: D41073 Part Number Label Width In. (mm) Marker Qty. Std. Pkg. Qty. PESW-A-* 0.50 (13.0) 10/card 10 cards PESW-AA-11Y 0.30 (7.6) 80/card PESW-B-* 1.00 (25.4) 10/card PESW-C-* 1.97 (50.0) PESW-D-* 3.90 (99.1) 3/card PLVS0202* 2 1/card 10 cards PLVS0404* 4 5 cards PESW-*-1Y Caution – Risk of Electric Shock PESW-*-11Y Warning of Static Sensitive Device W3154 Belt Drive Entanglement Hazard PESW-*-6Y Caution – Risk of Ionizing Radiation PESW-AA-11Y Warning of Static Sensitive Device W3156 Gear Entanglement Hazard PESW-*-8Y Caution – Laser Beam W3152 Crush Hazard W3158 Cut or Sever Hazard PESW-*-9Y Caution – General Warning, Risk of Danger W3153 Pinch Point Hazard W3198 Heated/Hot Surface Hazard
Safety Signs & Labels 800.777.3300 | Panduit.com 3" x 9" PSSG4012 3" x 9" PSSG4018 3" x 9" PSSG4016 9" x 6" PSSG4721 9" x 6" PSSG4751 9" x 6" PSSG4029 9" x 6" PSSG4036 9" x 6" PSSG4031 9" x 6" PSSG4039 9" x 6" PSSG4032 6" x 9" PSSG4021 6" x 9" PSSG4024 6" x 9" PSSG4025 6" x 9" PSSG4033 6" x 9" PSSG4023 Contemporary clear-shield signs look good in regular light and perform in the dark.
- Architectural-style signs for the office as well as industrial environments
- Printed on photoluminescent film
- Can be seen when power goes out
- Sub-surface protected from top wear
- Mounts with double-sided adhesive foam tape (included) Glow Clear-Shield Signs 10" x 14" B5579 10" x 14" B4579 7" x 10" 10" x 14" B7327 7" x 10" 10" x 14" B7328 10" x 14" B4534 10" x 14" B4536 7" x 14" B4549 7" x 14" B4515 7" x 14" B4516 Glow Signs 14" x 10" B3508 14" x 10" B3509 7" x 10" 10" x 14" B7332 18" x 4" B4510 18" x 4" B4507 10" x 7" 14" x 10" B7331 7" x 10" 10" x 14" B7323 7" x 10" 10" x 14" B7324 10" x 7" 14" x 10" B7326 10" x 7" 14" x 10" B7325 Severe Weather Signs Exit & Emergency Signs Fire Signs B7333 7" x 10" 10" x 14" B7329 7" x 10" 10" x 14" B7330 10" x 14" B4504 Available Sizes Codes 7" x 10" 0710 7" x 14" 0714 10" x 7" 1007 10" x 14" 1014 Available Sizes Codes 14" x 10" 1410 12" x 4" 1204 18" x 4" 1804 24" x 4" 2404 Available Materials Codes Glow Adhesive (Each) PVSG Glow Plastic (Each) PRSG How to Order Signs: Select Material Code: PVSG1 Select Size Code: 07142 Select Label Sign Part Number: B45153 Combine Codes in Specific Order for Complete Part Number: PVSG0714B45154
Safety Signs & Labels Projecting Signs When you need identification, location, and direction, signs can be seen from various angles for extra visibility. Hang signs along hallways, stairways, corridors, and doorways. Projecting Signs are 0.100" thick high-impact plastic with images on the two panels that are covered by a UV protective coating. Flanged edges have pre-drilled mounting holes. Wall mount with screws or self-adhesive foam tape (both included). 3D - 8" x 12" Panel PSS3P4034 90D - 8" x 12" Panel PSS9P4034 3D - 12" x 9" Panel PSS3P4392 90D - 12" x 9" Panel PSS9P4392 3D - 6" x 5" Panel PSS3P4021 90D - 8" x 8" Panel PSS9P4021 3D - 6" x 5" Panel PSS3P4019 90D - 8" x 8" Panel PSS9P4019 3D - 6" x 5" Panel PSS3P4014 90D - 8" x 8" Panel PSS9P4014 3D - 6" x 5" Panel PSS3P4006 90D - 8" x 8" Panel PSS9P4006 3D - 6" x 5" Panel PSS3P4037 90D - 8" x 8" Panel PSS9P4037 3D - 6" x 5" Panel PSS3P4049 90D - 8" x 8" Panel PSS9P4049 3D - 8" x 12" Panel PSS3P4036 90D - 8" x 12" Panel PSS9P4036 3D - 24" x 4" Panel PSS3P4026 90D - 24" x 4" Panel PSS9P4026 3D - 18" x 4" Panel PSS3P4016M 90D - 18" x 4" Panel PSS9P4016M 3D - 18" x 4" Panel PSS3P4029 90D - 18" x 4" Panel PSS9P4029 3D Signs Project 45° from the wall, provide optimum viewing from the front and sides 90D Signs Project 90° from the wall, are viewed from either side
Safety Signs & Labels 800.777.3300 | Panduit.com Panel Size 3D Projection Overall Size 90D Projection Overall Size 8" x 12" 8" x 18" x 9" 8" x 12" x 1 1/2" Panel Size 3D Projection Overall Size 90D Projection Overall Size 18" x 4" 18" x 7 1/2" x 3" 18" x 4" x 1 1/2" 12" x 9" 12" x 14" x 7" 12" x 9" x 1 1/2" 24" x 4" 24" x 7 1/2" x 3" 24" x 4" x 1 1/2" 3D - 18" x 4" Panel PSS3P4069 90D - 18" x 4" Panel PSS9P4069 3D - 6" x 5" Panel PSS3P4062 90D - 8" x 8" Panel PSS9P4062 3D - 6" x 5" Panel PSS3P4008 90D - 8" x 8" Panel PSS9P4008 3D - 6" x 5" Panel PSS3P4011 90D - 8" x 8" Panel PSS9P4011 3D - 6" x 5" Panel PSS3P4042 90D - 8" x 8" Panel PSS9P4042 3D - 6" x 5" Panel PSS3P4010 90D - 8" x 8" Panel PSS9P4010 3D - 6" x 5" Panel PSS3P4053 90D - 8" x 8" Panel PSS9P4053 3D - 6" x 5" Panel PSS3P4002 90D - 8" x 8" Panel PSS9P4002 3D - 6" x 5" Panel PSS3P4047 90D - 8" x 8" Panel PSS9P4047 3D - 6" x 5" Panel PSS3P4055 90D - 8" x 8" Panel PSS9P4055 3D - 12" x 9" Panel PSS3P4658 90D - 12" x 9" Panel PSS9P4658 3D - 18" x 4" Panel PSS3P4070 90D - 18" x 4" Panel PSS9P4070 3D - 12" x 9" Panel PSS3P4444 90D - 12" x 9" Panel PSS9P4444 3D - 12" x 9" Panel PSS3P4443 90D - 12" x 9" Panel PSS9P4443 3D - 8" x 12" Panel PSS3P4087 90D - 8" x 12" Panel PSS9P4087 3D - 8" x 12" Panel PSS3P4071 90D - 8" x 12" Panel PSS9P4071 3D - 8" x 12" Panel PSS3P4058 90D - 8" x 12" Panel PSS9P4058 3D - 6" x 5" Panel PSS3P4081 90D - 8" x 8" Panel PSS9P4081 3D - 6" x 5" Panel PSS3P4035 90D - 8" x 8" Panel PSS9P4035 3D - 6" x 5" Panel PSS3P4023 90D - 8" x 8" Panel PSS9P4023 *SDS - Safety Data Sheets
Safety Signs & Labels BWHT BYEL C442 D440 N443 Sign Panels – Blank Space for Custom Messages Sub-Surface Printed Adhesive Polyester (Type PPS):
- High quality signs for use indoors and outdoors
- Excellent resistance to UV light, chemical atmosphere and abrasion
- Excellent life and adhesion properties
- Printed graphics are protected by clear polyester laminate
- Temperature Range: -40° to 275°F Rigid Polyethylene (Type PRS):
- Rugged signs for indoors and outdoors
- Abrasion resistant
- Used where adhesives will not work
- Can be used with Panduit Thermal Transfer Desktop Printers and Easy-Mark™ Labeling Software to create your own custom signs
- Print your own legend on clear polyester tape with the TDP43ME Thermal Transfer Desktop Printer and adhere label to adhesive or non-adhesive sign panel
- Can also be used with Panduit die cut letters and numbers
- Temperature Range: -105° to 250°F 8 1/2" x 11" SEZ-1CLL 8 1/2" x 11" SEZ-1DLL 8 1/2" x 11" SEZ-1NLL Laser Printable Adhesive Signs
- Signs can be printed with a standard laser printer
- Indoor polyolefin pressure sensitive signs with square corners on stay-flat liner
- 25 signs per package 8 1/2" x 11" SEZ-1WLL 8 1/2" x 11" SEZ-1WHLL 8 1/2" x 11" SEZ-1YLL Self-Laminating Adhesive Sign Carriers
- Indoor/outdoor rated for resistance to UV light, chemical atmosphere and abrasion
- Excellent for applications where adhesives will not work
- Temperature Range: -40° to 150°F
- 5 carriers/pkg. Part No. Size Adhesive SEZ-SNC1 6"H x 7"W SEZ-SNC2 7"H x 10.5"W SEZ-SNC3 6"H x 12"W SEZ-SNC4 9.5"H x 12"W Non-Adhesive SEZ-RSC1 6"H x 7"W SEZ-RSC2 7"H x 10.5"W SEZ-RSC3 9.5"H x 12"W SEZ-RSC4 6"H x 12"W Available Sizes Codes 7" x 10" 0710 10" x 14" 1014 14" x 20" 1420 Available Materials Codes Printed Adhesive Polyester (Each) PPS Rigid Polyethylene (Each) PRS Select Size Code: 07102 How to Order Signs: Select Material Code: PPS1 Combine Codes in Specific Order for Complete Part Number: PPS0710D4404Select Sign Base Part Number: D4403
Choose the Right Tag Material Select a material based on your application requirements to ensure your message is conveyed clearly and effectively. Poly Cardstock (PCT) Pulp-free tags have no wood pulp or paper content, unlike standard cardstock tags, and are available at an economical price. Material Features
- Thin, pliable 0.010" poly-based tags will not crack, distort, or shrink
- Waterproof and tear-resistant from incidental pulls and snags
- Can be printed on both sides
- Scuff-resistant matte surface is easy to write on with pen or marker
- 3/8" non-reinforced hole
- Indoor usage
- Non-reinforceable hole Laminate Plastic (PCTL) Nearly indestructible tag is made to withstand tough, abusive conditions. Printed Message 0.010" Cardstock Tag 3/8" Metal Grommet Hole Material Features
- 0.010" cardstock tag sealed by a thick, 0.007" laminate on both sides – right to the edges – to protect the printed image
- Tear-proof, weatherproof and chemical-resistant
- Durable to withstand dirt, grease, liquid splashes and rough handling
- Scratch-resistant matte-finish laminate surface is easy to write on with pen or marker
- 3/8" hole, reinforced by a pull-proof metal grommet
- Available in Lockout Tags
- Indoor and outdoor usage - when the most durable tags are required
- Chemical applications and tough industrial settings 0.007" Laminate Both Sides Printed Message 0.010" Pulp-Free Cardstock 3/8" Hole Rigid Plastic (PVT) High-strength rigid plastic tag is ideal for use in tough industrial environments – resists chemicals, tears, and abrasions. Material Features
- 0.015" thick rigid plastic tags are relatively bendable
- Matte surface is easy to write on with pen or marker
- Can be printed on both sides
- 3/8" hole, reinforced by a pull-proof metal grommet
- Indoor and temporary outdoor usage
- Chemical and dirty/greasy environments Printed Message 0.015" Plastic 3/8" Metal Grommet Hole Self-Laminating Tags Protect written messages and photos when your life is on the line. Protected Printed Image 3/8" Hole• Write information and insert a photo (where applicable), then laminate your own tag
- Protection from moisture, chemicals and dirt
- Prevents tampering with the information
- Dual self-laminating polyester flaps pre-attached at the top
- Reinforced by a pull-proof metal grommet 0.010" Overlaminate Flap Both Sides Safety Tags Our selection of safety tags is just as diverse as your workplace.
- Prevent the potential for accidental injury and property damage
- Alert, call out or draw attention to temporary hazards
- Required critical tool in safety, performance and maintenance operations We Have What You Need Look to us for the tags that you need! In addition to standard OSHA safety tags, our comprehensive selection of safety tags incorporates key categories like Lockout/Tagout, Equipment Status and Record Inspection. Safety Tags Identify Temporary Hazards Safety Tags...
- Call out attention to hazards
- Prevent the potential for accidental injury or property damage
- Identify and inform that a hazardous condition exists Attach and hang the tags as close as possible to the hazard situation where the tag can be readily seen. Tags are to remain in-place until the hazard is eliminated or the hazardous operation is complete. The Occupational Safety and Health Administration (OSHA 29 CFR §1910.145) and American National Standards Institute (ANSI Z535) provide specifications, designs, applications, and uses of accident prevention tags. Tags can be printed in a variety of colors and messages to meet your needs. They are typically designed with an attention-getting signal word for a degree of hazard along with a specific message and areas to write in particular information. Safety tags are an inexpensive, fast solution for temporary marking and identification of hazards. Note: A tag shall not be used in place of a permanent sign or label for hazards in normal use, operation or maintenance. 800.777.3300 | Panduit.com
Signed By: Date: LIVE WIRE PVT-56-Q PVT-57 PVT-62-Q PVT-96-QPVT-96 PVT-97 PVT-97-Q Front PVT-98 Back Front PVT-98-Q Back DO NOT OPERATE PVT-99Front PVT-97S-Q Back PVT-238-Q STANDARD BACK A STANDARD BACK B Choose from two back message styles, noted under each part number as A and B. 106110641027 1043 Front PVT-110 Back Front Back Front Back Front Back Front Back PVT-153-Q PVT-155-Q PVT-156-Q PVT-157-Q PVT-160-QPVT-148-Q PVT-150-Q PVT-161-Q Front PVT-112 Back Front PVT-165-Q Back
Bilingual Spanish Safety Tags 1126 1125 1063 11521151 1127 1153 STD BILINGUAL BACK Inspection & Status Record Tags BackFront 1136 Back 1130 Front Back 1134 FrontBack 1131 Front Back 1137 Front Back 1148 Front Back 1047 Front Back 1117 FrontBack 1048 Front Back 1128 Front BackFront 1138 Back 1132 FrontBack 1133 Front Available Packages Codes Pk. of 5 (blank) Pk. of 25 -Q Available Materials Codes Poly Cardstock PCT- Rigid Plastic PVT- Select Tag Base Part Number: 10112 How to Order Tags: Select Material Code: PCT -1 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PCT-1011; 25/Pk – PCT-1011-Q4Select Package: 5/Pk – (blank); 25/Pk – -Q3 800.777.3300 | Panduit.com
Pk. of 5 (blank) Pk. of 25 -Q Available Materials Codes Poly Cardstock PCT- Rigid Plastic PVT- How to Order Tags: Select Material Code: PCT -1 Select Tag Base Part Number: 10502 Select Package: 5/Pk – (blank); 25/Pk – -Q3 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PCT-1050; 25/Pk – PCT-1050-Q4
Self-Laminating Lockout Tags 1056 1055 1057 1150 STD BILINGUAL LOCKOUT BACK Available Packages Codes Pk. of 5 (blank) Pk. of 25 -Q Available Materials Codes Poly Cardstock PSCT- Rigid Plastic PST- Select Tag Base Part Number: 10602 How to Order Tags: Select Material Code: PSCT -1 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PSCT-1060 ; 25/Pk – PSCT-1060-Q4Select Package: 5/Pk – (blank); 25/Pk – -Q3 Available Packages Codes Pk. of 5 (blank) Pk. of 25 -Q Available Materials Codes Poly Cardstock PCT- Rigid Plastic PVT- Laminate Plastic (Pk. of 5) PCTL- Select Tag Base Part Number: 10512 How to Order Tags: Select Material Code: PCT -1 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PCT-1051; 25/Pk – PCT-1051-Q4Select Package: 5/Pk – (blank); 25/Pk – -Q3 Back 1058 Front Back 1060 Front Back 1059 Front Back PST -3 Front Back PST -12 Front 800.777.3300 | Panduit.com
Insert, enclose and contain your status alert tags in a secure tag holder system.
- Mount durable plastic holder and insert tag to display alert status
- Default “DO NOT USE” message shows when no tag is inserted
- Available in two styles: (A) Secure-Status – Durable plastic holder measures 10"H x 3 1/2"W x 3/8" overall with 5 1/2"H x 2 3/4"”W clear view front window. Upper jaws close to fit onto post rails or poles up to 2 3/8" diameter or through any 1/2" opening to lock out a device. Accommodates up to four padlocks (sold separately). (B) Status Alert – Durable 0.060" thick plastic holder measures 12"H x 4 1/2"W overall with a 2 3/4" diameter opening at top. Insert tag into the 5 1/2"H x 4 1/2"W clear polycarbonate plastic front pocket, secure with nylon tie (sold separately) and mount in a visible location with large opening at the top. PT -1164 PT -1160 (A) (B) PT -1162 PT -1165 PT -1163 PT -1158 PT -1161 PT -1159 (A) Secure-Status Holder (B) Status Alert Holder
This tag can take the abuse of the harshest industrial environment. It’s thick, tough, and rigid to withstand tugging, pulling, twisting and bending.
- Made of tough recycled polycarbonate
- Relief text increases visibility
- Double-sided
- Polycarbonate plastic resists most corrosive environments
- Write on these tags with permanent marker
- 3/8" hole without grommet meets dielectric requirements
- Measures 5 7/16" x 3 1/16" x 1/8"
- Available in packages of 5 and 25 STANDARD BACK Pkg/5 PVT -1062 Pkg/25 PVT -1062-Q Roll of Tags STANDARD BACK Portable dispenser roll for your on-the-go needs
- Keep a large quantity of tags readily available
- Tags are connected end-to-end with perforations, and housed in an convenient cardboard dispenser
- Dispenser box measures 6 5/8"H x 6 5/8"W x 3 5/8"D
- Box features 1 1/2" perforated center hole for mounting
- Poly cardstock tags are tear- and water-resistant
- Tags measure 6 1/4"H x 3"W, with 3/8" hole
- Writable matte surface, printed on both sides with space to sign, date and add notes
- Available in 100 and 250 tags per roll Pkg/5 PVT -1162 Pkg/25 PVT -1162-Q 100/Roll PCT -1077-C 250/Roll PCT -1086-B 100/Roll PCT -1078-C 250/Roll PCT -1081-B 100/Roll PCT -1080-C 250/Roll PCT -1087-B 100/Roll PCT -1093-C 250/Roll PCT -1096-B 100/Roll PCT -1083-C 250/Roll PCT -1088-B 100/Roll PCT -1084-C 250/Roll PCT -1089-B 100/Roll PCT -1085-C 250/Roll PCT -1090-B STD. LOCKOUT BACK General Safety Tags 800.777.3300 | Panduit.com
Aluminum Inspection Record Tag
- Four-year aluminum tag is made to withstand the inspection period
- 0.020" Aluminum
- Pack of 5 Meets OSHA 29 CFR §1910.157(e) 2016 2017 20192018 Start Year
2016 PT -1129
Scaffold Status 3 ‘n 1 Fold Tag Simply fold tag to display appropriate message. When status changes remove tag from holder and unfold to change message. Shown with Secure-Status Holder. Quickly and conveniently change the safety status of your scaffold with our 3 ‘n 1 Fold Tag.
- Display DANGER, CAUTION or ATTENTION messages all from the same tag with a simple fold
- Ideal for use with Secure-Status or Status Alert Holder (sold separately)
- Front and back display the same color with related info
- Folded tag size: 5 3/4" x 3 1/4". Unfolded size: 11 1/2" x 6 1/2"
- Available in Poly Cardstock (PCT) or Rigid Plastic (PVT) in packs of 5 or 25 Material Part No. UOM Part No. UOM Poly Cardstock PCT-1157 Pkg. of 5 PCT-1157-Q Pkg. of 25 Rigid Plastic PVT-1157 PVT-1157-Q Loop Strap Tags Attach tags by the self-fastening strap for quick marking of hazards.
- Hangs on its own strap by looping the vertical strap around itself
- Flexible 0.014" polyethylene plastic
- 5 1/4" x 3 1/4" tag body with the strap being 1 3/8"W x 6"L x 7/16" wide opening
- Resists grease, dirt, and moisture
- Message is printed on one side only
- Can be written on with permanent marker
- Available in packs of 25 PVT -1072-Q PVT -1073-Q PVT -1074-Q PVT -1069-Q PVT -1070-Q PVT -1071-Q PVT -1075-Q PVT -1076-Q
Blank tags allow you to write any message in pen, pencil or marker. Use for coding, marking, quick identification, production status or inventory. Manila Cardstock Tags
- 0.0013" tags with patch-reinforced 3/16" hole
- Pack of 100 Part No. Size Size No. Hole Only PCT-1101-C 4 3/4" x 2 3/8" 5 PCT-1102-C 5 1/4" x 2 5/8" 6 PCT-1103-C 6 1/4" x 3 1/8" 8 Hole with 12" Galvanized Steel Wire PCT-1104-C 4 3/4" x 2 3/8" 5 PCT-1105-C 5 1/4" x 2 5/8" 6 PCT-1106-C 6 1/4" x 3 1/8" 8 Standard Color Blank Cardstock Tags
- 0.0013" coated tags with patch-reinforced 3/16" hole
- Pack of 100 Part No. Size Size No. Plain - with Hole Only PCT-1107 4 3/4" x 2 3/8" 5 PCT-1108 5 1/4" x 2 5/8" 6 PCT-1109 6 1/4" x 3 1/8" 8 Hole with 12" Steel Wire PCT-1110 4 3/4" x 2 3/8" 5 PCT-1111 5 1/4" x 2 5/8" 6 PCT-1112 6 1/4" x 3 1/8" 8 To Order: Add color code after part number: Blue – B-C, Green – G-C, Red – R-C, White – W-C, Yellow – Y-C. Example: Part No. PCT-1107 + Color Code B-C = PCT-1107B-C 10331032103110301029 Premium Blank Tags 1028 Available Packages Codes Pk. of 5 (blank) Pk. of 25 -Q Available Materials Codes Poly Cardstock PCT- Rigid Plastic PVT- Self-Laminating Poly Cardstock PSCT- Self-Laminating Rigid Plastic PST- How to Order Tags: Select Material Code: PCT -1 Select Tag Base Part Number: 10302 Select Package: 5/Pk – (blank); 25/Pk – -Q3 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PCT-1030; 25/Pk – PCT-1030-Q4 Part No. Size Size No. Hole Only PCT-1225-C 4 3/4" x 2 3/8" 5 PCT-1114-C 6 1/4" x 3 1/8" 8 Hole with Galvanized Steel Wire PCT-1115-C 4 3/4" x 2 3/8" 5 PCT-1116-C 6 1/4" x 3 1/8" 8 White Tyvek® Tags
- Lightweight, pressure-bonded fibers
- Flexible 0.075" thick material is abrasion- and tear-resistant
- Withstands moisture, chemicals, and frequent handling
- Patch- and metal-reinforced 3/16" hole is available plain or looped with 12" galvanized steel wire
- Pack of 100 Tyvek® is a registered trademark of DuPont™ 800.777.3300 | Panduit.com
Part No. Color SEZ-TAGWH Red and Black/White SEZ-TAGOR Red and Black/Orange SEZ-TAGY Red and Black/Yellow Create Your Own Cardstock Tags
- Create your own economical cardstock tags on ink jet printers
- Economical solution for temporary, indoor tags
- Cardstock is semi-rigid tag with perforation for easy tag separation and punched hole for hanging
- Tags measure 3" x 5"
- 4 tags/sheet; 25 sheets for 100 tags per package
- Can be used with self-laminating safety tag carrier for extra durability
- Rigid vinyl, self-laminating material
- Indoor/outdoor rated; high quality, rugged material resistant to abrasion; legend is protected by overlaminate; use where adhesives will not work
- Temperature range: 0°F to 176°F (-18°C to 80°C)
- Rigid polyethylene material
- Indoor/outdoor rated; high quality, rugged material resistant to abrasion; use where adhesives will not work
- Temperature range: -30°F to 250°F (-34°C to 121°C) Part No. Legend Color (Legend/ Background) Width Height Tags Per Pkg. Std. Pkg. Qty. Std. Ctn. Qty.In. mm In. mm PST-FO CAUTION FIBER OPTIC CABLE Black/ Yellow 3.50 89.0 2.00 51.0 5 1 40 PST-FOBLNK BLANK Yellow Order number of packages required in multiples of Std. Pkg. Qty. Part No. Legend Color (Legend/ Background) Width Height Tags Per Pkg. Std. Pkg. Qty. Std. Ctn. Qty.In. mm In. mm PT-BGND NETWORK BUILDING GROUND Green/ Yellow 2.75 70.0 1.38 35.0 100 1 5 PT-GND WARNING GROUND WIRE DO NOT REMOVE Black/ YellowPT-TGND WARNING TELEPHONE CO. REPAIR SERVICE Order number of packages required in multiples of Std. Pkg. Qty. Self-Laminating Fiber Optic Cable Marker Tags Ground Warning Tags Self-Laminating Safety Tag Carriers
- Cut out paper to fit and insert into the self-laminating carrier allows tags to be resistant to mild chemicals and acids
- Sturdy brass grommet provides extra durability
- Panduit PLT2S (7.40") nylon ties included for quick and easy installation
- Meet OSHA Standard 1910.147 for lockout tag 50 lb. pull force requirement Part No. Lamination Style Tag Size Pkg. Qty. PST-4 Front only 3.50" x 5.75" 25 PST-5 Front and back PST-1 Front only 3.00" x 2.00" 10 PST-2 3.25" x 5.75" 5 Part No. Color Width Height Tags Per Pkg. Std. Pkg. Qty. Std. Ctn. Qty.In. mm In. mm SLCT-IG Gray 3.00 76.2 1.31 33.3 25 1 4 SLCT-OR Orange SLCT-WH White SLCT-YL Yellow SLCT-3 White 4.00 101.6 0.50 12.7SLCT-3OR Orange SLCT-3YL Yellow Attach with Panduit Intermediate or Standard Cross-Section Cable Ties. Component Labels for Laser/Ink Jet Printers Supplied on 8.5" x 11" Sheets C200X100YJJ White, polyester label 2.00 50.8 1.00 25.4 – 1000 5000 Component Labels for Thermal Transfer Desktop Printers Supplied on Rolls C200X100YJT White, polyester label 2.00 50.8 1.00 25.4 – 2500 10000 Component Cassettes for Panther™ LS8 Hand-Held Thermal Transfer Printer C200X100YJC White, polyester label, 200/cassette 2.00 50.8 1.00 25.4 – 1 10 Self-Laminating Cable Marker Holders for Large Cables or Cable Bundles
- Rigid vinyl, self-laminating materials
- Indoor/outdoor rated high quality rugged material resistant to abrasion
- Legend is protected by overlaminate
- Use where adhesives will not work
- Temperature range: 0°F to 176°F (-18°C to 80°C)
Safety Absence of Voltage Testers (AVT) 45800.777.3300 | Panduit.com VeriSafe™ Absence of Voltage Testers The Safe Way to Verify the Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification test to validate the absence of voltage. This process includes a number of stages that can be complex and time-consuming when using hand-held portable test instruments. The patent-pending VeriSafe™ Absence of Voltage Tester from Panduit simplifies this process by automating the voltage verification process. Once installed, a simple push of a button enables qualified electrical workers to verify the absence of voltage and see an active indication when the absence of voltage is confirmed. This provides a new and innovative way to safely, reliably, and efficiently verify the absence of voltage before accessing potentially dangerous electrical equipment. Instruction Label Shown: VS-AVT System Components Shown: Insulation Piercing Connectors Indicator Module
- 30mm knockout, mount on exterior of enclosure
- Operate and maintain without exposure to electrical hazards
- Instruction label with operating instructions
- VS-AVT2 will have a blue faceplate while VS-AVT will have a yellow faceplate AVT System Cable
- Connects isolation module to indicator module
- 600 V cable available in multiple lengths for easy installation
- Replaceable with connectors on each end
- Replaceable with additional lengths
- Locking connectors on both ends
- Right angle connector at indicator module saves space Isolation Module
- Prevents hazardous voltage from reaching door
- Universal mounting (DIN rail or surface tabs)
- Output contacts provide ability to create alarms or communicate with other systems Sensor Leads
- Can be installed on line or load side of electrical disconnect
- Two leads per phase; must be physically separated from each other
- Optimized for use with the VeriSafe™ Insulation Piercing Connector Simple Battery Replacement
- Long-life industrial battery
- Replaceable from outside the enclosure
- Interior battery compartment is fingersafe (IP20)
- No tools required
46 Safety Absence of Voltage Testers (AVT)
- Services other environments with Hazardous Location offering covering Class 1 Division 2 and Class 1 Zone 2 environments.
- Reduces the risk of exposure to electrical hazards which improves worker safety.
- Continues to provide a simplified process for easier compliance when used as part of the lockout/tagout process described in NFPA 70E. Shown: VS-AVT2 VeriSafe™ Hazardous Locations Absence of Voltage Tester (AVT) Part No. Description VS-AVT2-C02-L03 VeriSafe™ Absence of Voltage Tester for Class 1 Division 2 hazardous locations - 2 ft. system cable, 3 ft. sensor leads VS-AVT2-C08-L10 VeriSafe™ Absence of Voltage Tester for Class 1 Division 2 hazardous locations - 8 ft. system cable, 10 ft. sensor leads
- The VeriSafe™ Insulation Piercing Connector provides a fast, secure, and reliable way to terminate AVT sensor leads.
- The compact connector design accommodates up to two taps in a single housing that fully insulates both connections.
- The patent pending connector allows taps to be made without compromising the integrity of conductors and includes integrated strain relief.
- Installation is fast and easy without the need to strip wires.
- Ideal for new and retrofit applications, connections can be made without modifying existing conductor runs. VeriSafe™ Insulation Piercing Connectors Part No. Description VS-CKP14-6 VeriSafe™ Insulation Piercing Connection Kit for Tapping 14 to 6 AWG conductors. Kit includes 3 connectors for installment of 1 AVT VS-CKP4-000 VeriSafe™ Insulation Connection Kit for Tapping 4 to 3/0 AWG conductors. Kit includes 3 connectors for installment of 1 AVT Equipment Retrofit Kits VS-AVT-RKP1 Complete kit to retrofit equipment with VeriSafe™ Absence of Voltage Tester. Includes AVT device with 10 ft. sensor leads, 8 ft. system cable, VeriSafe™ Insulation Piercing Connection Kit 14-6 AWG power connectors, (12) cable ties, (6) cable tie mounts, (1) wire marker card VS-AVT-RKP2 Complete kit to retrofit equipment with VeriSafe™ Absence of Voltage Tester. Includes AVT device with 10 ft. sensor leads, 8 ft. system cable, VeriSafe™ Insulation Piercing Connection Kit 4 - 3/0 AWG power connectors, (12) cable ties, (6) cable tie mounts, (1) wire marker card Shown: VS-AVT VeriSafe™ Absence of Voltage Tester (AVT) Part No. Description VS-AVT-C02-L03 VeriSafe™ Absence of Voltage Tester with 2 ft. system cable, 3 ft. sensor leads VS-AVT-C08-L10 VeriSafe™ Absence of Voltage Tester with 8 ft. system cable, 10 ft. sensor leads Equipment Retrofit Kits VS-AVT-RKP1 Complete kit to retrofit equipment with VeriSafe™ Absence of Voltage Tester. Includes AVT device with 10 ft. sensor leads, 8 ft. system cable, VeriSafe™ Insulation Piercing Connection Kit 14-6 AWG power connectors, (12) cable ties, (6) cable tie mounts, (1) wire marker card VS-AVT-RKP2 Complete kit to retrofit equipment with VeriSafe™ Absence of Voltage Tester. Includes AVT device with 10 ft. sensor leads, 8 ft. system cable, VeriSafe™ Insulation Piercing Connection Kit 4 - 3/0 AWG power connectors, (12) cable ties, (6) cable tie mounts, (1) wire marker card Accessories VS-AVT-CABLE-02 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 2 ft. VS-AVT-CABLE-04 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 4 ft. VS-AVT-CABLE-08 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 8 ft. VS-AVT-CABLE-16 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 16 ft. VS-AVT-CABLE-20 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 20 ft. VS-AVT-CABLE-30 AVT System Cable for use with VeriSafe™ AVT device. Cable length is 30 ft. VS-AVT-IL-LINE Instruction Label for Verisafe™ AVT Device with Line Side Checked VS-AVT-IL-LOAD Instruction Label for Verisafe™ AVT Device with Line Side Checked VS-AVT-DL Diagnostic Label for Verisafe™ AVT Device
Cable Ties | Cable Ties & Wire Markers 47800.777.3300 | Panduit.com Pan-Ty® Cable Ties – Nylon 6.6
- For indoor use
- Versatile locking cable ties can be used in countless applications
- One-piece construction for consistent performance and reliability
- Lowest threading force of any one-piece cable tie in the industry
- Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation Part No. Cross-Section Color Size Length x Width x Thickness Max. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Pkg. Qty. PLT2H-L Light-heavy Natural 8.1" x 0.300" x 0.075" 2" 120 lbs. GTH-E, GS4H, GS4EH, PTH, STH2, ST3EH 50 PLT1.5I-M Intermediate Natural PLT1.5I-M0 Black PLT1.5M-M Miniature Natural 1000 GTS-E, GS2B, GTH-E, PTS, PPTS, PTH, STS2, STH2 PLT2S-M Standard Natural 50 lbs. GTS-E, GS2B, GTH-E, GS4H, PTS, PPTS, PTH, STS2, STH2PLT2S-M0 Black PLT3S-M Natural 11.5" x 0.190" x 0.052" 3" Pan-Ty® Marker and Flag Ties
- Nylon 6.6 material for indoor use
- Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use
- Flame retardant material has a flammability rating of UL 94V-0 – for indoor use
- Used to fasten and identify bundles at the same time
- One-piece construction for consistent performance and reliability
- Can be marked with Panduit marker pens or computer printable labels
- Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation Part No. Cross-Section Color Marker Type Size Length x Width x Thickness Marker Write-On Area Max. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Pkg. Qty. PLF1M-C Miniature Natural 18 lbs. GTS-E, GS2B, PTS, PPTS, STS2 100 PLM2M-C Wrap 8" x 0.98" x 0.35" 0.26" x 0.95" 2" GS4H, PTS, PTH, PPTS, STS2, STH2 Pan-Steel® Polyester Fully Coated Cable Ties – MLTFC Series
- Polyester coating available in two color options provides visual indication for easy identification
- Self-locking head design speeds installation and locks into place at any length along the tie body
- Heavy cross section
- Polyester coating provides additional edge protection and prevents corrosion between dissimilar metals
- AISI 316 stainless steel for the most corrosive environments
- UV resistant, low smoke, halogen-free material
- Temperature Range: -40° to 302°F MLTFC2H-LP316RD MLTFC2H-LP316BU *Other lengths available, contact Panduit Customer Service. ^Base material less coating. Part No. Color Size Length* x Width x Thickness^ Max./Min. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Pkg. Qty. MLTFC2H-LP316RD Red MLTFC2H-LP316BU Blue
48 Cable Ties & Wire Markers | Cable Ties
Pan-Ty® Locking Cable Ties – Polypropylene – Distinctive Green Color
- For chemical resistance where high loop tensile strength is not required especially in the presence of hydrochloric acid, salts, and bases
- For indoor use
- Material requires lowering the tool setting (see table below)
- One-piece construction for consistent performance and reliability
- Lowest threading force of any one-piece cable tie in the industry
- Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation Part No. Cross-Section Color Size Length x Width x Thickness Max. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Tool Setting Pkg. Qty. Pan-Ty® Clamp Ties – Nylon 6.6
- For indoor use
- Used to secure a cable bundle to another surface such as a control panel, communication rack, wall or ceiling
- Design allows for bundling before or after screwing clamp in place
- One-piece construction for consistent performance and reliability
- Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
- UL Listed for use in plenum or air handling spaces per NEC PLC1M-S4-C Part No. Cross-Section Color Size Length x Width x Thickness Nominal Hole Dia. Screw Size Metric Screw Size Max. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Pkg. Qty. PLC1M-S4-C Miniature Natural PTS, PPTS, STS2 GS4H, PTS, PTH, PPTS, STS2, STH2 Pan-Ty® Releasable Cable Ties – Nylon 6.6
- For indoor use
- Extended release tab permits easy release and re-use where changes are anticipated during development, production, or servicing in the field
- One-piece construction for consistent performance and reliability
- Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
- UL Listed for use in plenum or air handling spaces per NEC Part No. Cross-Section Color Size Length x Width x Thickness Max. Bundle Diameter Min. Loop Tensile Str. Recommended Installation Tool Pkg. Qty.
49Cable Ties | Cable Ties & Wire Markers 4-Way Adhesive Backed Cable Tie Mounts
- Allows cable tie entry from all four sides
- Available in multiple sizes to match application load requirements
- Provides 2-up for fast and easy liner removal to speed installation Rubber Adhesive
- General purpose
- Fast strength adhesion dwell time 2 hours after installation, prior to loading
- Temperature Range: -20° to 120°F Acrylic Adhesive
- For high temperature locations and exposure to UV rays
- Maximum adhesive strength after 8 hours dwell time, prior to loading
- Temperature Range: -20° to 180°F Part No. Size Length x Width x Thickness Material Color Environment Adhesive Mounting Method Used with Cable Ties* Pkg. Qty. ABMM-A-C ABS White Indoors Rubber M, I 100 ABMM-AT-C0 Weather Resistant ABS Black Outdoors/HighTemp Acrylic ABM2S-A-C ABS White Indoors Rubber M, I, S ABM2S-AT-C0 Weather Resistant ABS Black Outdoors/HighTemp Acrylic ABM112-A-C Nylon 6.6 White Indoors Rubber ABM112-AT-C0 Weather Resistant Nylon 6.6 Black Outdoors/HighTemp Acrylic ABM3H-A-L Nylon 6.6 White Indoors Rubber M, I, S, HS, LH, H, HLM 50 ABM3H-AT-L Indoors/HighTemp Acrylic ABM4H-A-L Indoors Rubber ABM4H-AT-L Indoors/HighTemp Acrylic *Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, and H = Heavy, HLM = Miniature Tak-Ty® Hook & Loop Ties. GTS-E GTH-E Cable Tie Tools – Tool Controlled Tension and Cut-Off
- Use in production, maintenance, or construction applications
- Tool controls tension provides flush cut-off and speeds installation to lower installed cost
- Lightweight and balanced
- Easy to change tension adjustment and easy to operate
- A combination of design, operation, and construction features, provides a long service life
- No special maintenance required
- Ergonomic design lowers the risk of repetitive motion injuries
- Lowest activation and impact to installer’s hand Part No. Weight Use with Cable Ties GTS-E 9.8 oz. SM, M, I, S GTH-E 12 oz. S, HS, LH, H Mounts, Plates and Spacers We carry mounts, plates and spacers. Go to www.panduit.com for our full offering. 800.777.3300 | Panduit.com
50 Cable Ties & Wire Markers | Cable Ties
Adhesive Backed Latching Wire Clips
- Route and secure cords and cables
- Convenient releasable latch
- Available in three sizes with releasable latch
- For indoor use only
- Gray Color Nylon 6.6*
- Rubber adhesive Part No. Size Max. Bundle Di- ameter Pkg. Qty. LWC38-A-C 1"L x 1"W x 0.56"H 0.38" 100 LWC50-A-L 1.26"L x 1"W x 0.67"H 0.50" LWC75-A-L 1.48"L x 1.24"W x 0.9"H 0.75" Pan-Steel® Strapping – MS Series
- Fold over design provides high-retained tension in mechanical fastening and cable bundling applications
- Can be used in a wide range of indoor, outdoor, and underground (including direct burial) applications
- Smooth surfaces and rounded edges assures cable protection and worker safety
- AISI 201 stainless steel for general-purpose applications
- AISI 316 stainless steel for the most corrosive environments
- After tensioning, cut end is locked inside with low profile buckle – no sharp edges
- Recommended installation tool – BT75SDT Part No. Description Size Length* x Width x Thickness Max./Min Bundle Diameter Strap Breaking Strength Pkg. Qty. MS4W75T30-Q2 Stainless steel strapping,
201 AISI stainless steel
20.2"L x 0.75"W x 0.030"T 4"/1" 2400 lbs. 25 MSW75T30-CR6 Custom length stainless steel strapping, AISI 316 stainless steel 100-ft. L x 0.75"W x 0.030"T –/1" 2400 lbs. 1 Roll MSBW75-C6 Individual buckles use with custom length strapping, AISI 316 (0.75" width) 1.31"L x 1.64"W x 0.070"T – 100 *Other lengths available, contact Panduit Customer Service. Hand Operated Installation Tool for MS Series Strapping
- Screw drive tension mechanism provides high tension with minimal effort, reducing operator fatigue
- Heavy duty construction offers a longer service life
- Allows quick side entry of the strap into tool to speed installation
- For use with 0.75" width strapping only
- Screwdriver required for buckle closure (not included) No. BT75SDT Bevel Entry Clips
- Beveled entry allows for easy insertion of cable bundle
- Natural Color Nylon 6.6
- For indoor use only
- Rubber adhesive
- 50/Pkg. Part No. Size Max. Bundle Diameter BEC38-A-L 1.46"L x 1.24"W x 0.52"H 0.38" BEC62-A-L 1.46"L x 1.24"W x 0.79"H 0.62" BEC75-A-L 1.46"L x 1.49"W x 0.89"H 0.75" Clincher™ Adjustable Releasable Clamp
- Adjustable clamp designed to contain a range of cable bundle diameters
- Latch can be released to provide access to cable bundles
- For indoor use only
- Material: Polypropylene
- Bundle Diameter Range: 0.19"-0.68"
- Rubber adhesive: General purpose choice with fast strength adhesion dwell time of 2 hours after installation, prior to loading. Temperature Range: -20° to 120°F
- Gray
- 25/Pkg. No. ARC.68-A-Q14 Adhesive Backed Cord Clips
- Cables are easily snapped into or out of the clips
- Natural Color Nylon 6.6
- Rubber adhesive
- 100/Pkg. Part No. Size Max. Bundle Diameter ACC19-A-C 0.75"W x 0.62"L x 0.25"H 0.19" ACC38-A-C 1.00"W x 1.00"L x 0.38"H 0.38" ACC62-A-C 1.24"w x 1.12"L x 0.63"H 0.62" *Go to panduit.com for full product offering. Gray wire clips pictured.
51Wire Markers | Cable Ties & Wire Markers Pre-Printed Wire Marker Books
- Convenient, pocket-sized book
- Full size markers are perforated and can be torn into half size markers for both ends of conductors
- Terminal block markers are included to properly identify connectors
- Ten pages of markers per book
- Pre-printed black on white vinyl-cloth, adhesive back markers
- Temperature Range: -50° to 170°F
- Marker sizes: Terminal block marker – 0.22" x 0.25"
- Indoor/outdoor rated conformable label can be removed and reused
- Durable, temperature-resistant, and dimensionally stable for rough, textured surfaces
- Resists oil and abrasions Part No. Markers Total Markers Each Legend PCMB-1 0 thru 9 45 PCMB-2 A thru Z, 0 thru 15, +, -, / PCMB-3 1 thru 45 PCMB-4 1, 2, 3 150 PCMB-5 A, B, C PCMB-6 T1, T2, T3 PCMB-7 L1, L2, L3 PCMB-8 1 thru 15 16 thru 90 A thru Z, +, -, /, 0 PCMB-12 A thru Z Blank (write-on) PCMB-13 +, -, AC, DC POS, NEG, GND NEUT SPARE, Blank (write-on) PCMB-16 0 thru 33, A, B, C, +, -, L1, L2, L3, T1, T2, T3 10 PCMB-25 0 thru 9 L1, L2, L3, T1, T2, T3 Pre-Printed Wire/Cable Marker Tape Dispenser
- Flexible polyester marker tape conforms tightly to wires/cables
- Dispenser allows marker tape to be cut to the exact length required for marking any size wire/cable
- Durable plastic dispenser can be attached to tool belt for industrial use
- Character height is 0.11"
- Pre-printed black on white, adhesive-back polyester
- Indoor/outdoor rated is resistant to UV light, chemicals, and abrasions
- Excellent long lasting adhesion properties
- Temperature Range: -40° to 250°F Part No. Description PMD-0-9 Dispenser filled with one 8-ft. roll each number 0 thru 9 PMDR-0-9 Replacement refill rolls set for PMD-0-9, one 8-ft. roll each number 0 thru 9 800.777.3300 | Panduit.com
52 Cable Ties & Wire Markers | Wire Markers
Blank Self-Laminating Write-On Wire/Cable Marker Books
- 10 pages of markers per book
- Clear section of marker overlaminates and protects printed legend
- Markers have ink receptive area to allow handwritten legends Part No. Marker Size Markers Per Page Markers Per Book PSCB-3Y 1"W x 3"L 6 60 PSCB-6Y 1"W x 6"L 3 30 Blank Self-Laminating Wire/Cable Marker Dispensers
- Self-laminating labels are provided in handy dispenser which protects markers when not in use
- Clear section of marker overlaminates and protects write-on legend
- Quick, easy to use for smaller installations and maintenance
- White, adhesive back write-on vinyl
- Indoor/outdoor rated conformable material for general wire/cable labeling
- Temperature Range: -40° to 150°F S100X125VARY S100X125VAFY (1) Dispenser (1) Roll, white write-on, vinyl label (1) PFX-0 pen 1"W x 1.25"L 0.38" 0.12" 0.28" Roll of 200 S100X225VARY S100X225VAFY (1) Dispenser (1) Roll, white write-on, vinyl label (1) PFX-0 pen 1"W x 2.25"L 0.75" 0.24" 0.48" Roll of 100
Labelmakers 53800.777.3300 | Panduit.com Easy-Mark Plus™ Labeling Software
- Quickly and easily generate labels
- Market-specific labeling application tools assist in creation of identification solutions for data centers, network applications, panel shops, and construction and maintenance applications
- Saves times and money (up to 75%) with features such as WYSIWYG user interface, data import, symbol import, and pre-loaded formats
- Upgrades available at www.panduit.com
- Site license available for up to five additional installs per license System Requirements:
- 64 MB hard drive space and 64 MB RAM (256 MB RAM recommended)
- Windows* 2000, XP , Vista, 7, 8, or 10
- Mouse or compatible pointing device
- Microsoft.NET Framework 2.0 or higher
- CD-ROM drive or USB Port Part No. Description EMPLUS-CD Easy-Mark Plus™ Labeling Software supplied on CD-ROM * Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries Laser/InkJet Self-Laminating Wire Cable Marker Labels
- Indoor/outdoor rated for durability; high-temperature resistance, and dimensional stability; does not stretch or easily tear; preferred method for wire/cable labeling
- Polyester label is white* with print-on area
- Order number of labels required in multiples of Std. Pkg. Qty.
- Meets ASTM E-595 for air space handling (white only)
- Temperature Range: -65° to 225°F S100X075YAJ For 18 – 14 AWG wire 1"W x 0.75"L 0.25" 0.08" 0.16" 2500S100X125YAJ For 12 – 10 AWG wire 1"W x 1.25"L 0.38" 0.12" 0.28" S100X225YAJ* For 8 – 4 AWG wire 1"W x 2.25"L 0.75" 0.24" 0.48" 1000 S100X400YAJ For 2 – 1 AWG wire 1"W x 4"L 1.00" 0.32" 0.95" S200X225YAJ For 8 – 4 AWG wire 2"W x 2.25"L 0.75" 0.24" 0.48" S200X400YAJ For 2 – 1 AWG wire 2"W x 4"L 1.00" 0.32" 0.95" *Other colors available, replace A with B (Blue), C (Brown), D (Green), E (Gray), F (Orange), G (Purple), H (Red) and I (Yellow).
54 Labelmakers
Thermal Transfer Desktop Printer and Accessories
- Compact, lightweight design enables use in office or remote locations
- 300 dpi thermal transfer printer creates crisp, clear legends with superior legibility
- Up to 2.00 inches per second print speed for fast label production
- Use to print a wide variety of self-laminating labels, component labels, non-laminated labels, heat shrink labels, marker plates and continuous tapes up to 4.00 inches wide
- Easy-Mark™ Labeling Software and hybrid ribbon included with printer Part No. Description TDP43ME 300 dpi printer; includes printer, Panduit Easy-Mark Plus™ Labeling Soft- ware, RMEH4BL black hybrid ribbon, AC power adapter with US power cord, USB cable, user manual, quick start card, and driver disk; for use in North America TDP43ME-KIT TDP43ME printer kit. Includes: printer, Panduit Easy-Mark Plus™ Labeling Software, RMEH4BL black hybrid ribbon, AC power adapter with US power cord, USB cable, user manual, quick start card, TDP43ME-RS Roll Stand, TDP43ME-CASE, one roll of S100X150VATY labels, and driver disk; for use in North America Part No. Description RMEH4BL* Black hybrid thermal transfer ribbon. Use with heat shrink, self-laminating, Turn-Tell®, tan polyimide labels, and vinyl cloth labels RMER4BL* Black resin thermal transfer ribbon. Use with polyester and white polyimide labels, continuous vinyl tape, marker plates, and raised panel labels RMER4BU Blue resin thermal transfer ribbon. Use with polyester and white polyimide labels, continuous vinyl tape, marker plates, and raised panel labels RMER4GR Green resin thermal transfer ribbon. Use with polyester and white polyimide labels, continuous vinyl tape, marker plates, and raised panel labels RMER4RD Red resin thermal transfer ribbon. Use with polyester and white polyimide labels, continuous vinyl tape, marker plates, and raised panel labels RMER4WH White resin thermal transfer ribbon. Use with polyester labels, continuous vinyl tape, marker plates, and raised panel labels * For 2.5" wide ribbons, replace 4 in part number with 2. For example, the part number of a 2.5" wide black hybrid thermal transfer ribbon is RMEH2BL. Ribbons for Use with the TDP43ME Thermal Transfer Desktop Printer
- Hybrid – Recommended for use with self-laminating, heat shrink, component and non-laminated labels
- Resin – Recommended for use with component labels, marker plates, and continuous tape
- 4.3" x 240-ft. (110mm x 73m) Thermal Transfer Continuous Label Tapes
- Tapes offer crisp, clear legends with superior legibility
- Indoor/outdoor rated
- Conformable flat label applications for safety and facility identification
- Can be overlaminated to increase durability
- Use thermal transfer resin ribbon
- Vinyl Tapes: 4" x 100-ft.
- Reflective Tapes: 4" x 50-ft. Part No. Color T400X000RP1 White T400X000RQ1 Blue T400X000RU1 Orange T400X000RW1 Red T400X000RX1 Yellow Thermal Transfer Printable Arc Flash Labels
- Provide employees with the highest degree of safety through proper identification and communication
- Clearly visible and recognizable hazard information to communicate arc flash hazards present
- Labels are constructed of durable polyester designed to withstand UV exposure, outdoor use, water, abrasion
- Custom Arc Flash Hazard Labels can be printed using Panduit labeling software with desktop thermal transfer printers
- Use thermal transfer resin ribbon Custom Die-Cut Custom Continuous Color Header Tape 4" x 4" C400X400A51 250/Roll 4" x 4" C400X400YZ1 250/Roll 4" x 6" C400X600A51 100/Roll 4" x 6" C400X600YX1 100/Roll 4" x 6" C400X600YZ1 100/Roll 4" x 50-ft. T400X000A91 4" x 50-ft. T400X000YX1 Vinyl Tapes, 4" x 100-ft. Part No. Color T400X000VP1Y White T400X000VQ1Y Blue T400X000VR1Y Brown T400X000VS1Y Green T400X000VT1Y Gray T400X000VU1Y Orange T400X000VV1Y Purple T400X000VW1Y Red T400X000VX1Y Yellow T400X000VY1Y Black Part No. Color T425X000YK1 Clear Reflective Tapes, 4" x 50-ft. Non-Printable Clear Overlaminate Tapes, 4.25" x 100-ft.
- Temperature Ranges: Vinyl: -58° to 176°F Polyester: -40° to 302°F Reflective: -40° to 180°F
55 Labelmakers
PanTher™ Hand-Held Thermal Transfer Printer and Accessories
- Cut-to-length functionality eliminates label waste and label trimming labor
- Partial cut feature available to provide tear-apart strips of labels
- P1™ Label Cassette contains an integrated memory device for automatic formatting, recall of last legend used, and number of labels remaining in the cassette
- Market specific labeling tools simplify label creation for electrical components, panel building, and construction and maintenance
- USB interface for importing data, system upgrades, and printing from a wireless laptop or desktop computer
- Prints self-laminating labels, heat shrink tubing, die-cut component labels and continuous tapes
- Fast loading label cassette includes both label material and ribbon to make changing labels easy
- Large graphic display with backlight for improved visibility Part No. Description LS8EQ-KIT Includes LS8EQ printer with QWERTY keypad, one cassette of S100X150VAC self-laminating labels, six AA alkaline batteries, LS8-CASE, LS8-PCKIT, LS8-IB, LS8-WS, quick reference card and operator’s manual LS8EQ Includes LS8EQ printer with QWERTY keypad, one cassette of S100X150VAC self-laminating labels, six AA alkaline batteries and quick reference card P1™ Continuous Tape Cassettes for PanTher™ LS8EQ Hand-Held Thermal Transfer Printers
- Fast loading label cassette includes both label material and ribbon to make changing labels easy
- Print custom pipe markers, voltage markers, signs and bin marker labels on demand
- Available in a variety of colors, in polyester and vinyl adhesive materials
- For flat label applications only
- 1" x 25-ft.
- Polyester temperature range: -40° to 302°F
- Vinyl temperature range: -50° to 225°F Part No. Description T100X000VPC-BK Black on white, vinyl tape T100X000VPC-RD Red on white, vinyl tape T100X000VQC-BK Black on blue, vinyl tape T100X000VQC-WH White on blue, vinyl tape T100X000VSC-BK Black on green, vinyl tape T100X000VSC-WH White on green, vinyl tape T100X000VUC-BK Black on orange, vinyl tape T100X000VWC-BK Black on red, vinyl tape T100X000VWC-WH White on red, vinyl tape T100X000VXC-BK Black on yellow, vinyl tape T100X000VYC-WH White on black, vinyl tape T100X000YKC-BK Black on clear, polyester tape T100X000YKC-WH White on clear, polyester tape P1™ Continuous Reflective Tape Cassettes for PanTher™ LS8EQ and Hand-Held Thermal Transfer Printers
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- Reflective material improves label visibility in low light conditions
- For flat label applications only
- 1" x 18-ft.
- Reflective temperature range: -40° to 180°F Part No. Description T100X000RPC-BK Black on white, reflective tape T100X000RUC-BK Black on orange, reflective tape T100X000RXC-BK Black on yellow, reflective tape Metal Embossing Hand Tool and Tape System
- Multi-functional cutting die design creates embossed marker plates with raised cable tie slot in one step instead of three, for faster installation
- Lightweight, compact, and portable, allows user to create custom length identification on demand at remote job sites
- Embosses 3/16" characters (A-Z, 1-9, /, ( ) onto stainless steel or aluminum tape, to improve visibility in applications that are subjected to dirt or paint Part No. Tool Kit MEHT187 Includes tool, additional marking wheel, carrying case, one roll each META (aluminum) and METS (stainless steel) tape. * Aluminum ties are recommended for use with aluminum tape to prevent galvanic reaction (corrosion that can occur between stainless steel and aluminum in certain environments). Part No. Description Roll Size Std. Pkg. Qty. META-X Aluminum tape* 0.50" x 16' 10METS3-X 316 grade stainless steel tape 0.50" x 21' METS4-X 304 grade stainless steel tape 800.777.3300 | Panduit.com
56 ID Tags & Pipe Markers | ID Tags
Valve Identifier Plastic Tags Soft Aluminum Tags Imprint to leave a lasting impression even if ink wears off.
- 24-gauge (0.020") thick, double-sided soft aluminum laminate over tag board
- 3/16" plain or eyelet hole
- Writing permanently debosses Mark and identify the status of the valve and prevent accidental adjustment.
- 0.015" rigid vinyl
- 2 1/2"H x 2"W with 3/8" metal grommet
- Sold in packs of 5 PIDT003 PIDT001 PIDT002 PIDT004 PIDT005 PIDT009 3/4" x 3" Pkg. of 25 PIDT006 PIDT010 1 3/8" x 3 1/8" PIDT007 PIDT011 2" x 4" PIDT008 PIDT012 3" x 5" Stainless Steel and Brass Marker Plates and Tags Part No. Material Color Custom Marking Parameters Size Thickness Used with Pan-Steel® Cable Ties Std. Pkg. Qty. Max. 3/16" (4.77mm) Character Per Line Max. Lines of Text MMP350W17-Q 304 Stainless Steel Natural 23 6 1.73"W x 3.5"L 0.015" MLT-S MT350-C
304 Stainless Steel Natural 26
3 0.75"W x 3.5"L 0.010" 100 MT350W17-Q 6 1.70"W x 3.5"L 0.015" 25 MT150D-Q 304 Stainless Steel Natural 5, 6, 5 3 1.5" dia. 0.035" 25 MTB150D-Q Brass Brass 5, 6, 5 0.040" 25 Metal Indenting Machine
- Provides quick, easy, and permanent identification with Panduit’s Pan-Alum™ Marker Plates and Cable Ties and Pan-Steel ® Stainless Steel Marker Plates, Tags, Cable Ties and Straps
- Automatic table indexing advances material forward for convenience and improved productivity
- New, improved design features aluminum base and durable construction
- 3/16" character wheel No. MIM187
- Provides permanent identification of pipes, conduit, valves, cables and equipment in harsh environments
- Designed for use with Panduit’s Pan-Steel ® Stainless Steel Cable Ties for fast installation at lowest installed cost
- All marker plates/tags can be embossed or laser etched with Panduit Factory Custom Marking Service
- Designated plates feature easy feed design with a raised slot to simplify cable tie installation and improve productivity
- Temperature ranges: Stainless Steel Marker Plates, Tags, & Cable Ties: -112° to 1000°F Brass Tags: -112° to 302°F
Pipe Markers | ID Tags & Pipe Markers 57 Pipe Markers CONTENTS OF THE PIPE COLOR Fire quenching fluids WHITE ON RED Toxic and corrosive fluids BLACK ON ORANGE Flammable fluids BLACK ON YELLOW Combustible fluids WHITE ON BROWN Potable, cooling, boiler feed, and other water WHITE ON GREEN Compressed Air WHITE ON BLUE Marking and identification of contents in pipes and piping systems is important to safety and maintenance. Pipe markers are to visibly identify contents, flow directions and hazard classification, thus promoting a safe working environment. Installation recommendations:
- Above or below center visual line of pipe
- Frequent intervals on straight pipe runs
- Close to valves
- Near branches and Ts
- Any change in direction
- Before and after pipe going through walls Designed to meet or exceed ASME (ANSI) A13.1-2007 recommendations for size, color and visibility. Self Stick Vinyl (PPMA)
- 0.004" flexible vinyl marker has UV-resistant polyester overlaminate with high-tack, acrylic adhesive back
- Included arrow provides proper directional flow marking
- Durable, protective gloss surface withstands fading, abrasions, splashes, grease, dust, and dirt
- Service temperature is –20° to 176° F Snap On Pipe Markers (PPMS)
- Precoiled, heavy gauge 0.020" rigid vinyl plastic is lightweight, yet durable to withstand tough industrial environments
- Fits over pipes with dirty, greasy, or rough surfaces or other less than perfect surfaces
- Easy to remove and reapply
- Service temperature range is –4° to 158° F (not recommended for hot pipes) Part No. Legend 1001 1003 1005 1007 1009 1011 1013 1015 1017 1019 1021 1023 1025 1027 1029 1031 1033 1035 1037 1039 1041 1043 1045 1047 1049 Part No. Legend 1051 1053 1057 1059 1061 1063 1065 1067 1069 1071 1073 1075 1077 1079 1081 1083 1085 1087 1089 1091 1093 1095 1097 1099 1101 Part No. Legend 1103 1105 1107 1109 1111 1113 1115 1117 1119 1121 1123 1125 1127 1129 1131 1133 1135 1137 1139 1141 1143 1145 1147 1149 1151 Part No. Legend 1153 1157 1159 1161 1163 1165 1167 1169 1171 1173 1175 1177 1179 1181 1183 1185 1187 1189 1191 1193 1195 1197 1199 1201 1203 800.777.3300 | Panduit.com
ID Tags & Pipe Markers | Pipe Markers Part No. Legend 1205 1207 1209 1211 1213 1215 1217 1219 1221 1223 1225 1227 1229 1231 1233 1235 1237 1239 1241 1243 1245 1247 1249 1251 1253 1257 1259 1261 1263 1265 1267 1269 1271 1273 1275 1277 1279 1281 1283 Part No. Legend 1285 1287 1289 1291 1293 1295 1297 1299 1301 1303 1305 1307 1309 1311 1313 1315 1317 1319 1321 1323 1325 1327 1329 1331 1333 1335 1337 1339 1341 1343 1345 1347 1349 1351 1353 1357 1359 1361 1363 Part No. Legend 1365 1367 1369 1371 1373 1375 1377 1379 1381 1383 1385 1387 1389 1391 1393 1395 1397 1399 1401 1403 1405 1407 1409 1411 1413 1415 1417 1419 1421 1423 1425 1427 1429 1431 1433 1435 1437 1439 1441 Part No. Legend 1443 1445 1447 1449 1451 1453 1457 1459 1461 1463 1465 1467 1469 1471 1473 1475 1477 1479 1481 1483 1485 1487 1489 1491 1493 1495 1497 1499 1501 1503 1505 1507 1509 1511 1513 1515 1517 1519 1521 How to Order Pipe Markers: Select Material Code: Self Stick – PPMA1 Select Pipe Marker Base Part Number: 10012 Select Size Code: 3/4" to 1 1/4" – A3 Combine Codes in Specific Order for Complete Part Number: PPMA1001A4 Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 1" x 8" Each B 1 1/2" to 2" 1 1/2" x 8" D 2 1/2" to 6" 2 1/2" x 12" H 8" to 10" 4" x 24" Self Stick (PPMA) Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 6" x 8" Each B 1 1/2" to 2" 9" x 8" C 2 1/4" to 3" 14" x 12" E 3 1/4" to 5" 19" x 12"* F 5 1/4" to 6" 25" x 12"* *Have self-adhesive leading edge for secure fit Snap On Pipe Markers (PPMS)
Pipe Markers | ID Tags & Pipe Markers Color Banding Pipe Marking Tapes Directional Flow Arrow Tapes Provide 360° visibility for flow direction, with repeated arrows on the tape’s length.
- 0.006" self-adhesive vinyl
- Available in 1", 2" and 4" widths
- 54-ft. and 108-ft. rolls Part No. Size UOM Part No. Size UOM PPMR1X54 1" x 54-ft. Roll PPMR1X108 1" x 108-ft. RollPPMR2X54 2" x 54-ft. PPMR2X108 2" x 108-ft. PPMR4X54 4" x 54-ft. PPMR4X108 4" x 108-ft. To Order: Add color code after part number. Example: Part No. PPMR1X54 + Color Code BY = PPMR1X54BY To Order: Add color code after part number. Example: Part No. PFM1X36 + Color Code YEL = PFM1X36YEL Part No. Size UOM PFM1X36 1" x 108-ft. RollPFM2X36 2" x 108-ft. PFM3X36 3" x 108-ft. Variety of colors are ideal for coding pipes.
- 0.005" tapes with self-adhesive back, no liner
- Service temperature range -20° to 140°F
- Available in 1", 2" and 3" widths
- 108-ft. rolls Available colors with color code: Black/Yellow – BY , Green/White – GW, Blue/White – BLW, Red/White – RW, Black/Orange – BO, White/Brown – WBR Available colors with color code: Red – RED, Green – GRN, Blue – BLU, Gray – GRY , Brown – BRN, Black – BLK, Yellow – YEL, Orange – ORN, White – WHT , Purple – PUR Meets ASME A13.1, 3.1 Part No. Legend 1523 1525 1527 1529 1531 1533 1535 1537 1539 1541 1543 1545 1547 1549 1551 1553 1557 1559 Part No. Legend 1561 1563 1565 1567 1569 1571 1573 1575 1577 1579 1581 1583 1585 1587 1589 1591 1593 1595 Part No. Legend 1597 1599 1601 1603 1605 1607 1609 1611 1613 1615 1617 1619 1621 1623 1625 1627 1629 1631 Part No. Legend 1633 1635 1637 1639 1641 1643 1645 1647 1649 1651 1653 1657 1659 1661 1663 1665 1667 1669 How to Order Pipe Markers: Select Material Code: Self Stick – PPMA1 Select Pipe Marker Base Part Number: 15232 Select Size Code: 3/4" to 1 1/4" – A3 Combine Codes in Specific Order for Complete Part Number: PPMA1523A4 Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 1" x 8" Each B 1 1/2" to 2" 1 1/2" x 8" D 2 1/2" to 6" 2 1/2" x 12" H 8" to 10" 4" x 24" Self Stick (PPMA) Size Code Pipe Diameter Marker Size UOM A 3/4" to 1 1/4" 6" x 8" Each B 1 1/2" to 2" 9" x 8" C 2 1/4" to 3" 14" x 12" E 3 1/4" to 5" 19" x 12"* F 5 1/4" to 6" 25" x 12"* *Have self-adhesive leading edge for secure fit Snap On Pipe Markers (PPMS) 800.777.3300 | Panduit.com
ID Tags & Pipe Markers | Pipe Markers Roll Tape Pipe Markers Roll Form Pipe Markers Easily mark pipes quickly at various locations along a piping system.
- 72 identical legends per roll, with perforations between each length
- Use in continuous lengths, or tear at perforations
- 0.006" vinyl with protective laminate surface
- Peel-off liner with self-adhesive back applies to smooth, clean, dry surface
- Service temperature is -20° to 140°F
- Available in 1" x 54-ft. or 2" x 54-ft. rolls Wrap around virtually any size pipe when you have multiple pipes or pipes of unknown sizes.
- Unroll, measure, and easily cut to length on-site for proper fit
- 0.004" gloss, overlaminated poly vinyl marker wraps to adhere to itself
- High-tack, acrylic adhesive back stays on dirty, greasy, and rusty pipes
- Legend and arrow repeated, upright and upside-down, for universal direction and visibility
- Service temperature is -20° to 140°F
- Available 8" x 30-ft. or 12" x 30-ft. in rolls Part No. Legend PPMR0102 PPMR0101 PPMR0144 PPMR0145 PPMR0103 PPMR0146 PPMR0104 PPMR0147 PPMR0148* PPMR0149 PPMR0150 PPMR0151 PPMR0105* PPMR0106* PPMR0152 PPMR0153 Part No. Legend PPMR0154 PPMR0155 PPMR0108 PPMR0109* PPMR0110 PPMR0112 PPMR0111* PPMR0113 PPMR0114 PPMR0116 PPMR0117* PPMR0118 PPMR0119 PPMR0120 PPMR0115 PPMR0121 Part No. Legend PPMR0122 PPMR0123* PPMR0124 PPMR0125 PPMR0126 PPMR0127* PPMR0128 PPMR0129 PPMR0130 PPMR0131 PPMR0132 PPMR0133 Part No. Legend PPMR0136 PPMR0134 PPMR0135 PPMR0137 PPMR0138 PPMR0139 PPMR0140 PPMR0141 PPMR0143 PPMR0142 Size Code Pipe Diameter Roll Size Letter Height UOM B Up to 2" 8" x 30-ft. 3/4" Roll H Up to 6" 12" x 30-ft. 1 1/4" To Order: Add size code after part number. Example: Part No. PPMR0029 + Size Code H = PPMR0029H * Legends for 2" x 9" marker size will be abbreviated for space Roll Tape Pipe Marker & Directional Flow Arrow Tapes shown. Part No. Legend PPMR0028 PPMR0029 PPMR0001 PPMR0030 PPMR0002 PPMR0003 PPMR0004 PPMR0006 PPMR0005 PPMR0007 PPMR0008 PPMR0009 PPMR0010 Part No. Legend PPMR0011 PPMR0031 PPMR0012 PPMR0013 PPMR0014 PPMR0015 PPMR0016 PPMR0032 PPMR0017 PPMR0018 PPMR0019 PPMR0020 PPMR0021 Part No. Legend PPMR0022 PPMR0023 PPMR0024 PPMR0025 PPMR0027 PPMR0026 Size Code Pipe Diameter Roll Size Marker Size Letter Height UOM B Up to 2" 1" x 54-ft. 1" x 9" 3/4" Roll H Up to 6" 2" x 54-ft. 2" x 9" 1 1/4" To Order: Add size code after part number. Example: Part No. PPMR0102 + Size Code B = PPMR0102B
Specialty Pipe Markers | ID Tags & Pipe Markers 61 IIAR Ammonia Pipe Markers Duct Markers Medical Gas Pipe Markers Meets IIAR guidelines for proper pipe marking as specified in Bulletin No. 114. Identify Ammonia refrigeration piping and system components.
- 0.004" flexible vinyl, self-sticking markers have high-tack adhesive backed with liner
- One legend with directional flow arrows on each end to cut off for proper placement
- Glossy UV-resistant surface withstands dust, dirt and grease
- Service temperature range is -20° to 176°F
- Install onto clean smooth pipe surface Size Code Pipe Diameter Marker Size UOM A 3/4" x 1 1/4" 1" x 11" Each B 1 1/2" x 2" 1 1/2" x 15 7/8" C 2 1/2" x 6" 2 1/2" x 23 5/8" D 8" x 10" 3 1/2" x 33 1/2" To Order: Add size code after part number. Example: Part No. PPMA3001 + Size Code A = PPMA3001A Self Stick Part No. System System Abbreviation Physical State Pressure Level PPMA3001 Booster Discharge BD VAP LOW PPMA3002 Condenser Drain CD LIQ HIGH PPMA3003 Defrost Condensate DC LIQ PPMA3004 Hot Gas HG VAP HIGH PPMA3005 Hot Gas Defrost HGD PPMA3006 High Pressure Liquid HPL LIQ HIGH PPMA3007 High Stage Discharge HSD VAP HIGH PPMA3008 High Stage Suction HSS LOW PPMA3009 High Temperature Recirculated Liquid HTRL LIQ LOW PPMA3010 High Temperature Recirculated Suction HTRS LIQ/VAP PPMA3011 Liquid Injection Cooling LIC LIQ HIGH PPMA3012 Low Stage Suction LSS VAP LOW PPMA3013 Low Temperature Recirculated Liquid LTRL LIQ PPMA3014 Low Temperature Recirculated Suction LTRS LIQ/VAP PPMA3015 Low Temperature Suction LTS VAP PPMA3016 Relief Vent RV — — Mark air flow and its equipment purpose in duct work systems.
- Single legend printed on poly overlaminated self-stick vinyl
- High-tack adhesive back
- Available in two sizes Identify the contents of medical gas piping systems.
- 0.004" gloss vinyl, 3" x 3" marker with legend repeated five times, upright and upside-down for universal fit and visibility
- Adhesive backed and peel-off liner
- Adhere to pipes up to 3/4" OD size
- Service temperature is -20° to 140°F
- 20 markers per package Part No. Legend PPMA4001 PPMA4002 PPMA4012 EVAC PPMA4003 PPMA4010 INSTRUMENT AIR PPMA4013 PPMA4004 PPMA4005 Part No. Legend PPMA4006 PPMA4007 PPMA4008 PPMA4009 PPMA4011 WAGD Size Std. Pkg. Qty. 3" x 3" 20 Part No. Legend PPMA41 EXHAUST PPMA42 EXHAUST AIR PPMA43 INTAKE AIR PPMA44 OUTSIDE AIR Size Code Pipe Diameter Marker Size Arrow Size Letter Height UOM D Up to 6" 2 1/2" x 12" 2 1/2" x 2 1/2" 1 1/4" Each H Up to 10" 4" x 24" 4" x 4" 2 1/2" Available colors with color code: Black/Yellow – BY , White/Green – WG, White/Blue – WBL To Order: Add color code, then size code after part number. Example: Part No. PPMA41 + Color Code BY + Size Code D = PPMA41BYD Part No. Legend PPMA45 RELIEF PPMA46 RELIEF AIR PPMA47 RETURN AIR PPMA48 SUPPLY AIR Meets NFPA 99C-Section 4-3.5.4.1. and CGA Pamphlet C-9 Section 4.1 color requirements 800.777.3300 | Panduit.com
62 Lockout / Tagout | Intro
þ1. Be Aware of the Lockout Regulations Become familiar with the federal regulations known as The Control of Hazardous Energy (Lockout/Tagout). þ2. Develop List of Machinery & Equipment Survey your facility for all machinery and equipment that have the potential for requiring lockout. Post signs, apply labels and tags… …to warn and identify energy source areas and points requiring shut-down and lockout/tagout procedures. 3. Identify & Mark Energy Sources & Lockout Points þ Locate and document start-up areas of energy sources, such as:
- Mechanical • Electrical • Hydraulic
- Thermal • Pressure • Process Control
- Stored Energy (gravity, springs) þ4. Determine the Lockout Controls Identify and document the necessary devices that isolate and lock out energy sources, and secure them for on-site use. Standardize the devices for various functions for proper identification. þ5. Set up Lockout Training & Procedure Program Develop, standardize, and document the lockout process for each energy source. Identify employees’ level of involvement in the program – those that are made aware, affected, and to perform the lockout procedures. Accomplish this through comprehensive training programs and certifications. þ6. Implement the Lockout Program Initiate and enact the lockout/tagout program in accordance with the training procedures. Post reminders and have the necessary lockout/tagout devices readily available. þ7. Review Lockout Program Identify and document changes to existing procedures and new energy sources that require lockout. Make corrections, changes, and additions to the program. Conduct periodic review of lockout procedures (required at least annually) to ensure they are up to date and requirements are being met. 29 CFR § 1910.147… The Control of Hazardous Energy (Lockout/Tagout) ...requires the employers to establish a program and utilize procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices, and to otherwise disable machines or equipment to prevent unexpected energization, start-up or release of stored energy in order to prevent injury to employees. We offer solutions to help meet your lockout/tagout requirements and make your employees aware of the energy source hazards found throughout your facility. Look for products to meet your specific lockout needs on the following pages - ranging from lockout devices to training materials. Call us for consultation and on-site assessment of your lockout/tagout requirements. Just shutting down or disconnecting equipment is not enough…Lockout/ Tagout keeps employees safe by making it inoperable. Comply with OSHA Regulations and LOCK IT OUT! Before repairs, servicing, maintenance, or set-up of machines and equipment can begin, prevent the unexpected — the accidental start-up! Procedures, devices, and personnel must be set in place to prevent the serious injury or death that could occur when someone thinks something is safely off. To ensure machines and equipment remain inoperable means establishing a “program consisting of energy control procedures, employee training, and periodic inspections...” as described in the OSHA standard. The standard also identifies products used for achieving these goals, such as lockout and tagout devices. Highlighted here are seven steps to creating an effective lockout/tagout program.
Circuit Breaker | Lockout / Tagout 63 Circuit Breaker Lockout System OSHA (Occupational Safety and Health Administration) mandates that all energy sources be turned off and locked out to protect employees from injuries caused by the accidental startup of equipment under repair and service. To support compliance with OSHA 1910.147, Panduit offers a complete line of high quality, Circuit Breaker Lockout Devices to ensure that electrical energy sources are isolated for optimal work place safety. These Circuit Breaker Lockouts are part of an extensive line of innovative safety devices designed by Panduit to protect employees from risks associated with all forms of hazardous energy, while meeting safety and regulatory requirements. PowerLOK™ Circuit Breaker Lockout Devices Universal & I-LINE™ Circuit Breaker Lockout Devices Part No. Description Std. Pkg. Qty. PSL-PCB PowerLOK™ circuit breaker lockout PSL-PCB-V 5 PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout PSL-PCBNT-V 5 Part No. Description Std. Pkg. Qty. PSL-CB Universal circuit breaker lockout PSL-CB-V 5 PSL-CBNT “No Tool” Universal circuit breaker lockout PSL-CBNT-V 5 PSL-CBIL Circuit breaker lockout device for use with Square D I-LINE™/Federal Pacific (FPE) circuit breakers PSL-CBILNT “No Tool” circuit breaker lockout for use with Square D I-LINE™/Federal Pacific (FPE) circuit breakers PSL-CBKIT Circuit breaker lockout kit (1 each PSL-CBL, PSL-CBNT, PSL-CBILNT) PSL-CB-3PC (3) PSL-CB universal circuit breaker lockout Panduit’s new PowerLOK™ Circuit Breaker Lockout Devices include many innovative features to provide a versatile, easy to use lockout/tagout device. These devices can be applied to single or multi-pole circuit breakers (such as 120/277V breakers) to prevent the breaker from being turned back on; for safe performance of maintenance or service in accordance with lockout/tagout procedures.
- Two metal contacts
- Fits single and multi-pole circuit breakers
- Two-position padlock design
- Two-piece construction
- Quickly locks out circuit breakers (such as 120/277V breakers); ideal for industrial and harsh applications
- PSL-CB and PSL-CBIL can be installed using a screwdriver
- PSL-CBNT and PSL-CBILNT can be installed by hand, with no tool required PSL-PCB Large Handle Circuit Breaker Lockout Device Part No. Description Std. Pkg. Qty. PSL-CBL Large handle circuit breaker lockout PSL-CBL-V 5 Lockout Warning Strip Label Part No. Description Std. Pkg. Qty. Std. Pkg. Ctn. PSL-CBWL 0.54" x 4.84" (13.7mm x 122.9mm) warning label, 60 markers per book, red/white 1 10 Circuit Breaker Directory Sign
- Quickly locks out large molded-case circuit breakers (such as 480/600V breakers)
- Can be installed by hand, with no tool required Part No. Description Std. Pkg. Qty. PES-S1 Circuit breaker directory sign, paper (adhesive), 13.00" x 5.50" (330.2mm x 139.7mm), 1 sign, 5 signs/pack, red/white PSL-CBL PSL-CBNT PSL-PCBNT Miniature Circuit Breaker Lockout Devices Part No. Description Std. Pkg. Qty. PSL-MCB Universal miniature circuit breaker lockout PSL-MCB-V 5 PSL-MCBNT “No Tool” miniature circuit breaker lockout PSL-MCBNT-V 5
- Quickly locks out miniature circuit breakers commonly used in industrial automation and motor control
- On the PSL-MCBNT , multiple padlock orientations allow adjacent circuit breakers to be locked out individually
- PSL-MCB can be installed using a screwdriver
- PSL-MCBNT can be installed by hand with no tool required PSL-MCB PSL-MCBNT PSL-CBILNT I-LINE® is a registered trademark of Square D Company®. 800.777.3300 | Panduit.com
- Eliminate the guesswork when identifying power sources – a must for lockout/tagout compliance
- Adhesive paper sign designed to provide clear identification of circuit breaker connections, list up to 40 circuits plus add the part number to the index section
- Write-on area for adding your own warning message
- Made of vinyl cloth material that allows label to be removed easily after repairs are completed
- Features the international prohibition symbol for “Do Not Throw Switch”
64 Lockout / Tagout | Hasp
These devices provide the ideal solution when procedures require multiple workers on locked-out equipment. Workers can be assigned a padlock (sold separately) with shackle diameter up to 9/32" to attach to the hasp before starting their task. Ensure the energy source stays locked out — with multiple workers’ padlocks in the holes of the closed hasp. Once each worker completes their task, they remove their padlock. The hasp cannot be removed until the last padlock is removed. Part No. Part Description Max. No. Locks Std. Pkg. Qty. Std. Ctn. Qty. PSL-MLD Multiple lockout device; includes lockout hasp and 6.0' (1.8m) vinyl coated galvanized steel cable with loophole 6 1 20 PSL-MLDH-X Multiple lockout device (hasp only) 10 — PSL-1 Hasp with 1.00" (25.40mm) diameter jaw and overlapping tabs 6 12 144PSL-1.5 Hasp with 1.50" (38.10mm) diameter jaw and overlapping tabs PSL-1A Hasp with 1.00" (25.40mm) diameter jaw PSL-1.5A Hasp with 1.50" (38.10mm) diameter jaw 12 48 PSL-NC3 Non-Conductive lockout hasp with 3.00" (76.2mm) shackle 1 20 PSL-HD1 Heavy duty hasp with 1.00" x 1.00" (25.40mm x 25.40mm) clearance 5 12 — PSL-HD3 Heavy duty hasp with 1.00" x 3.00" (25.40mm x 76.00mm) clearance 7 PSL-1013 Hasp with 1.00” (25.40mm) diameter jaw. Non-sparking aluminum 6 1 — PSL-1014 Hasp with 1.50” (38.10mm) diameter jaw. Non-sparking aluminum Lockout Hasps Multiple Lockout Device Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-MLD Multiple lockout device; includes lockout hasp and 6.00' (1.8m) vinyl coated galvanized steel cable with loophole 1 20 PSL-MLDT Multiple lockout device; includes lockout hasp and 6.00' (1.8m) nylon coated high temperature rating galvanized steel cable with loophole PSL-MLDH-X Multiple lockout device (hasp only) 10 — PSL-MLDC 6.00' (1.8m) vinyl coated galvanized steel cable with loophole (cable only) 1 5PSL-MLDCT 6.00' (1.8m) nylon coated high temperature rating galvanized steel cable with loophole (cable only) PSL-MLDC200 200.00' (61.0m) vinyl coated galvanized steel cable on roll without loophole (cable only) PSL-MLDC200T 200.00' (61.0m) nylon coated high temperature rating galvanized steel cable on roll without loophole (cable only) PSL-MLD-CRIMP Additional crimps for creating cable loopholes, ten crimps per package 10 50 PSL-MLD-TOOL Tool for installing crimps on custom-length cables using the PSL-MDLC200 1 —
- Energy sources can be locked out quickly and easily by more than one worker for group lockout applications
- Heavy duty hasps with tamper-resistant designs to deter vandalism
- Variety of lockout hasp styles and sizes to accommodate a wide range of lockout applications
- Device can be used alone as a lockout hasp or with provided 0.19" (4.8mm) diameter cable to lockout electrical disconnects, gate valves, or large cumbersome devices
- Compact and easy to install
- Constructed of rugged polycarbonate and stainless steel for industrial and harsh applications
- Vinyl coated galvanized steel cable up to 176°F (80°C); nylon coated galvanized steel cable up to 230°F (110°C) PSL-MLD PSL-MLD PSL-1 PSL-1.5 PSL-1A PSL-1013 PSL-1.5A PSL-1014 PSL-HD1 PSL-HD3 PSL-NC3
65Hasp | Lockout / Tagout Aluminum Tag Hasps Lock out more equipment with the large reach hasp made to withstand tough and abusive environments.
- Scissor-style hasp comprised of two high-strength 0.090" thick red anodized aluminum plates
- Accommodates up to six padlocks (sold separately)
- Crossover jaw ends prevent prying and tampering
- Get true 1 1/2" round reach with the full jaw opening
- Measures 7"H x 2 3/4"W
- Bold, contrasting red/white/black lockout hazard message labels on both sides — with space to write in necessary information
- Red octagon shape reinforces lockout status and conveys STOP Double-Cross Aluminum Tag Hasps Lock out equipment with large reach, pry-resistant hasps.
- Made of two red anodized, 0.090" aluminum plates
- Double-crossed, octagon-shaped jaws are offset to cross over one another when closed, preventing the hasp from being easily pried apart
- Openings provide optimal reach - 1 3/4" dia. on one end and 3/4" dia. on the other
- Measures 7"H x 3 1/8"W (2 3/4" in the body) with hazard message labels on both sides
- Red octagon shape reinforces lockout status and conveys STOP PSL-1023 UOM Each UOM Each Tag Hasp Change out, insert, and secure a tag for each lockout situation with the Tag Hasp.
- 5 1/4" x 3" hasp fits in the palm of the hand
- Lightweight, all-dielectric plastic design
- STOP-shaped octagon front panel contains changeable Tab Tag (sold separately below) Easy to use: Insert lockout tag over the top hole inside the front panel
- Close down the 2 1/4" octagon panel to hold the tag in place
- Insert the open end of the 1/4" wide loop to lockout the device
- Hasp hangs by the 1 3/8" x 2 3/4" closed oval loop
- Secures with up to three padlocks (sold separately)
- Red octagon shape reinforces lockout status and conveys STOP PSL-1018 PSL-1019 Open position to insert tag Loop end brace and secure in place by padlock English, Spanish, and French labels included. PSL-1021 PSL-1022 Back Crossover jaw prevents prying and tampering. English, Spanish, and French labels included. PSL-1024 Back Std. Qty. Pkg. Tab Tags
- Unique tag design fits over special octagon-shaped tab
- For use with Tag Hasp (above)
- Tag is secured when the device is in the locked position
- Show the full face of the tag at all times
- Tags measure 4 1/2" x 2 1/8"
- Durable, 0.015" rigid plastic material
- Pack of 25 Back Part No. UOM PSL-1020 Each Shown with padlocks, tab tag, sold separately 800.777.3300 | Panduit.com
Large Handle Lever Lockout Position Mounting Rail Secure Slide Set Slide Stop Bar into position over breaker Lock out large handle or lever circuit breakers.
- Also works on up to three individual circuit breakers, including a variety of flip-lever switches
- Constructed of red dielectric ABS plastic and incorporates the octagon shape to convey STOP
- Consists of three parts: Mounting Rail, Slide Set and Stop Bar
- Installs without drilling using 3M™ VHB™ industrial bonding tape (included)*
- Additional mounting rails available for use on multiple panels
- Dimensions: Mounting Rail: 5"L x 3/4"W x 1/4"D, Slide Set: 2"L x 2"W x 1 3/8"D, and Stop Bar: 5"L x 1"W x 1"D
- Padlock and tag sold separately *For best adhesion, ideal bond time is 24 to 72 hours prior to lockout application Part No. Description UOM PSL-1006 Large Handle Lever Lockout Each PSL-1007 Additional Mounting Rails, 5" L VHB™ is a registered trademark of 3M™ Part No. Description UOM PSL-1008 Cinch Lockout with 6-ft. cable Each PSL-1016 15-ft. cable (separate) Funnel-shaped cable feeder for quick placement. Internal cable spooling feature for storage. Cinch Cable Lockout Universal spooling cable locks out multiple devices at one time.
- Unique, compact internal spooling feature
- Lock out multiple devices quickly, neatly, and easily
- Simply extend and loop the 6-ft. nylon-coated steel cable through several devices to lock them out; then insert the cable end back into the device to cinch tight
- When cable is cinched tight, device can then be secured with a padlock (sold separately)
- Durable plastic, octagon-shaped device measures 3 1/2" x 4 1/4" x 1 1/4"
- When finished, spool the cable back inside the device for neat, easy storage
- Octagon shape reinforces lockout status and conveys STOP Lockout / Tagout | Circuit Breaker & Cable
Valve & Lockout | Lockout / Tagout 67 Gate Valve Lockout Devices
- Gate valves regulating hydraulic, pneumatic, and chemical energy can be locked out quickly and easily
- Accommodates valve handles ranging from 1.00 inch (25.40mm to 13.00 inches (330.20mm) in diameter
- Constructed of rugged polypropylene providing strength, durability, and added security
- Secure with padlock and tag (sold separately) Part No. Fits Valve Handle Diameter Size UOM Each Part No. Description 13"L x 1"W x 1"H, Expands up to 20"L Prevent accidental shutdowns of critical equipment by keeping unauthorized persons from accessing electrical circuit breaker panels.
- Telescoping lockout bar attaches to breaker box cover screws
- Prevents opening of breaker box cover in order to lock out all breakers within the same breaker box
- For use on 14"-20" inch wide breaker boxes
- Constructed of sturdy, non-conductive material and installs in seconds Electrical Panel Lockout Twist & Turn Cinch Cable Lockout Run the cable through various devices; then, with a quick twist of the hasp, cinch the cable to prevent unauthorized access.
- Easy-to-use cable and cinch lockout hasp solution
- Polycarbonate, compact hasp is comprised of two 3" dia. x 1 1/2" thick rotating halves with 6-ft. red plastic-coated steel cable
- Visible red octagon shape reinforces the lockout situation Part No. UOM PSL-1017 Each Cinch closed position with holes aligned. Turn the hasp halves to cinch cable. 800.777.3300 | Panduit.com
68 Lockout / Tagout | Valve & Pneumatic
Stop valves from being turned with unique gull-wing design ball valve lockout.
- Quickly and simply secure over any closed ball valve handle
- Secure with padlock (sold separately)
- Bright red, plastic device works with ball valve handles either perpendicular or parallel to pipe
- Includes red “Danger Locked Out” label
- Red octagon shape reinforces lockout status and conveys STOP Wingspan halves open and close Part No. Fits Ball Valve Fits Handle Overall Size UOM PSL-1059 3/8" – 1 1/4" up to 5/8"W x 1/4" thick 3 1/8" x 4 1/2" x 4 1/2" Each PSL-1058 1 1/2" – 2" up to 1 1/2"W x 1/2" thick 4 1/2" x 5 2/3" x 5 2/3" To Order: Add color code after part number. Example: Part No. PSL-1065 + Color Code RED = PSL-1065RED Labels Additional adhesive labels are available each in ANSI or APWA colors: Red – RED, Yellow – YEL, Blue – BLU, Green – GRN, Purple – PUR. Part No. Fits Ball Valve UOM Each PSL-1070 1 1/2" – 2" English, Spanish, and French labels included. Versatile Pneumatic Lockout Keep employees safe with this rugged, tamper resistant method to lock out your pneumatic equipment/source.
- Device has seven openings ranging from 9/32" to 1/2" diameter that accommodate most male and female pneumatic end-fittings
- Clear cover allows user to see what is locked out
- Constructed of polycarbonate with steel hinge for tamper-resistance and durability
- Red octagon shape reinforces lockout status and conveys STOP
- Overall dimensions are 3 7/8" x 3 1/4" x 1 7/8" Part No. UOM PSL-1012 Each Pneumatic Energy Lockout Device
- Pneumatic energy devices can be locked out quickly and easily without costly tool modifications or inconvenient in-line valves
- When installed on the male pneumatic fitting, prevents the ability to engage into the female fitting
- Universal compact design makes the pneumatic lockout device easy to transport
- Five openings install on almost any fitting, even in tight spaces
- Rugged stainless steel construction offers superior strength, durability, added security and corrosion resistance
- Overall dimensions are 3.5" (88.9mm) diameter x 0.10" (2.54mm) thick Part No. UOM PSL-PEL Each Ball/Butterfly Valve Lockout Devices
- Ball valves regulating hydraulic, pneumatic, and chemical energy can be locked out quickly and easily
- Accommodates valve diameters ranging from 0.25" (6.4mm) to 8.00" (203.2mm)
- Constructed of rugged polypropylene providing strength, durability, and added security Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-BV1 Ball valve lockout, accommodates 0.25" – 1.00" (6.4mm – 25.4mm) valve pipe diameter 1 10 PSL-BV2 Ball valve lockout, accommodates 1.25" – 3.00" (31.8mm – 76.2mm) valve pipe diameter PSL-BV3 Ball valve lockout, accommodates 2.00" – 8.00" (50.8mm – 203.2mm) valve pipe diameter PSL-BFV Butterfly valve lockout, accommodates most butterfly valve handles
69Switch & Plug | Lockout / Tagout Universal Wall Switch Cover Flip the switch, flip the lockout.
- Dual use - works on both rocker/toggle and flat paddle switches
- Attaches to existing switch plate screw(s)
- Fully encloses entire switch
- Cover folds down to block screws and switch access
- Secure with a padlock (sold separately)
- Measures 4 1/2"H x 1 5/8"W x 7/8"D
- Unique design reduces error – applies only in direction of desired lockout position – on or off Switch locked in up position. Part No. UOM PSL-1015 Each Toggle-Switch Cover Prevent access to a toggle switch, yet still see its position. Quick and easy to install, tough lockout includes clear, industrial strength 3M™ VHB™ tape for secure adhesion*.
- Fits over toggle, button, or knob switch
- The top half can be removed and stored when not in use
- Clear polycarbonate maintains visibility of the switch position and doesn’t disrupt existing decals, markings, or messages
- 3 1/2" x 1 1/2" base which covers up to 3/4" x 1"H switch area
- Secures with a padlock (sold separately)
- Octagon shape reinforces lockout status and conveys STOP * For best adhesion, ideal bond time is 24 to 72 hours prior to lockout application. Part No. UOM PSL-1001 Each Push Button Cover Prevent accidental startups of push / pull operation buttons, such as emergency stop buttons.
- Consists of one semi-permanent aluminum ring and a clear polycarbonate top
- Semi-removable design allows for easy storage
- Clear top allows user to see push button
- Tough polycarbonate cover and aluminum ring make it tamper- and impact-resistant, as well as extremely durable
- Overall dimensions are 2 1/8"H x 2"W x 2 1/2"L
- Available in two sizes to fit over 22.5 and 30mm diameter buttons
- Additional new aluminum rings available
- Octagon shape reinforces lockout status and conveys STOP
- Secures with a padlock (sold separately) Part No. Description UOM PSL-1003 Push Button Cover with 22.5mm base Each PSL-1004 Push Button Cover with 30mm base PSL-1005 Additional 22.5mm metal ring only PSL-1002 Additional 30mm metal ring only Toggle Switch Cover Device Part No. UOM PSL-WS Each
- Compact secure design fits most toggle switches and some small circuit breakers
- Easily attached without removal of faceplate or screws
- Accommodates switches 0.45 – 0.78 inches tall x 0.25 – 0.38 inches x 0.25 – 0.40 inches thick
- Constructed of rugged nylon and stainless steel providing strength, durability, added security and corrosion resistance VHB™ is a trademark of 3M™ 800.777.3300 | Panduit.com
70 Lockout / Tagout | Switch & Plug
AC Plug End Lockout Device Part No. Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-P Plug Lockout 1 10
- Individual plugs in a wide range of sizes can be locked out to prevent energization
- Accommodates padlocks with shackle lengths of 1.50 inches or greater and plugs with a hole in a blade
- Constructed of rugged polycarbonate providing strength, durability, added security, and corrosion resistance Corded AC Plug Cover Lockout Devices
- Insert plugs, close cover, and secure with padlock and tag (sold seperately)
- Individual corded plugs in a wide range of sizes can be locked out to prevent energization
- Constructed of rugged polypropylene providing strength, durability, and added security Part No. Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-CL110 Lockout fits 120 VAC corded plug, 2.0" x 2.0" x 3.5" inside dimensions 1 10 PSL-CL480 Lockout fits 240 – 480 VAC corded plug, 3.25" x 3.25" x 6.50" inside dimensions Receptacle Blockout Device Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-ERB Blockout for 120 V electrical receptacle 1 25
- Blocks out receptacles to prevent equipment damage from overloading circuits or electrical interference
- Accommodates industrial electrical receptacles with two or three blades Global Plug Lockout Device Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-PI Global plug lockout for 220 – 240 Volt AC/ Industrial Plugs 1 10
- Individual plugs in a wide range of sizes can be locked out to prevent energization
- Accommodates padlocks with shackle lengths of 1.50 inches or greater and plugs with a hole in a blade
- Constructed of rugged polycarbonate providing strength, durability, added security, and corrosion resistance
Plug & Group Lock Box | Lockout / Tagout 71 Network security devices block unauthorized access to existing network infrastructure in the data center, at the workstation, in the industrial automation panel, and more. These devices save time and money associated with network downtime, data security breaches, infrastructure repair, and hardware replacement due to theft. The innovative design of the blockout device snaps into modules and is released with the removal tool, ensuring the safety and security of the network infrastructure. The versatile design of the lock-in device is compatible with most existing patch cords, faceplates, patch panels, IP cameras, and other IP devices. It is also compatible with VoIP phones to help prevent unauthorized tampering with connectivity to ensure E911 continuity. Network Security Devices PSL-DCJB PSL-DCJB-BL PSL-DCPLRX PSL-DCPLRX-BL PSL-USBA Part No. Jack Type Package Content Blockout Color Std. Pkg. Qty. PSL-DCJB RJ45 RJ45 jack blockout devices and one removal tool Red PSL-DCJB-BL Black PSL-USBA USB Type ‘A’ USB Type ‘A’ blockout devices and one removal tool Red 5 Part No. Package Content Plug Lock-In Color Std. Pkg. Qty. PSL-DCPLX Lock-in devices, and one installation/removal tool Red PSL-DCPLX-BL Black PSL-DCPLRX Recessed lock-in devices, and one installation/removal tool Red PSL-DCPLRX-BL Black Jack Module Blockout Device
- Blocks unauthorized access to jacks and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
- Compatible with most RJ45 and USB Type ‘ A ’ jacks to accommodate a variety of applications and does not interfere with jack contacts separation and punched hole for hanging
- Can be installed/removed without interfering with adjacent jacks or hardware
- May only be released with the special removal tool, ensuring the safety and security of your network infrastructure RJ45 Plug Lock-In Devices
- Tamper-resistant design blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
- Deters unauthorized users from moving or stealing VoIP phones helping to maintain E911 service
- Compact design does not interfere with adjacent jacks, even in high-density applications Removal Tool 800.777.3300 | Panduit.com
72 Lockout / Tagout | Plug & Group Lock Box
Look to view the keys and padlocks in a secure lock box that is shaped to say STOP! Four rows of aluminum strips contain 16 hooks to hang keys – identifiable through the clear front cover. Once closed, holes and slots along the edges of box and cover align. Secure with up to 42 padlocks (sold separately). Plus, there is a hole on the left backside for a supervisor’s padlock.
- Cover pry guard edge provides security when using minimal padlocks
- Visible safety red shows through the clear front cover
- Familiar octagon box shape conveys STOP message
- Front cover slides to hinge open
- 13" x 13" x 3 1/2" box is made of durable, impact-resistant plastic, designed for industrial environments Each padlock represents a worker on the lockout project. Each padlock removed signifies the worker has completed their portion of the project. Yet there is no access to the keys of the locked-out devices until the last padlock is removed. Additional features of the lock box include:
- Top carry handle for portability to lockout location
- Two rear keyholes for wall mounting
- Flange foot to set down on flat surface
- Front slot to drop in additional keys after lockout procedures have started English, Spanish, and French labels included. Metal Group Lock Box Part No. Description UOM PSL-GLBN Group Lock Box Each PSL-GLBNSS Stainless Steel Group Lock Box Part No. UOM PSL-1026 Each Part No. UOM PSL-1025 Each
- Manage multiple employees and energy sources involved in a group lockout procedure
- Accommodates up to 13 padlocks (not included)
- Available in industrial powder-coated or stainless steel construction
- Dimensions: 9.00"W x 6.00"H x 3.25"D Compact Plastic Group Lock Box Small, portable group lock box goes with you on the job – from the office to the production floor.
- Slots in lid to insert and store keys of locked-out devices
- Unique twist-to-turn lid for secure close
- Inner pry guard prevents tamper access
- Lid has two see-through windows and carry handle
- Octagon-shaped box in red conveys the STOP message
- 7 3/4" x 7 3/4" x 4" box is durable, impact-resistant plastic Lockout Quick Reference Card Part No. Part Description Number of Cards Included Std. Pkg. Qty. Std. Ctn. Qty. PSL-STEPS 2.13" x 3.38", lockout/tagout steps/calendar wallet card 25 1 4
- Provides those employees responsible for lockout/ tagout with a constant reminder of the OSHA recommended steps for shutdown and startup
- Current calendar year is printed on back side
73Padlock | Lockout / Tagout Part No. Part Description Std. Pkg. Qty. PSL-20SWCA 23.00" x 23.00" (584.2mm x 584.2mm), 20 person lockout station with components; components include: (20) PSL-8 red non-conductive lockout padlocks (keyed differently) (6) PSL-1.5 lockout hasps (25 tags) PVT-98 safety tags (25 tags) PVT-41 safety tags PSL-20SA 23.00" x 23.00" (584.2mm x 584.2mm) 20 person lockout station (sign only) PSL-10SWCA 11.50" x 23.00" (292.2mm x 584.2mm), 10 person lockout station with components; components include: (10) PSL-8 red non-conductive lockout padlocks (keyed differently) (3) PSL-1.5 lockout hasps (15 tags) PVT-98 safety tags (10 tags) PVT-41 safety tags PSL-10SA 11.50" x 23.00" (292.2mm x 584.2mm) 10 person lockout station (sign only) PSL-4SWCA 11.50" x 11.50" (292.2mm x 292.2mm), 4 person lockout station with components, components include: (4) PSL-8 red non-conductive padlocks (keyed differently) (3) PSL-1.5 lockout hasps (15 tags) PVT-98 safety tags PSL-4SA 11.50" x 11.50" (292.2mm x 292.2mm) 4 person lockout station (sign only) 6-Padlock Lockout Shadow Board Kit Kit Contents:
6 Steel Padlocks, 3/4" shackle (keyed differently)
10 Laminated Lockout Tags
10 Plastic Ties
1 Scissor Hasp, 1" opening
1 Scissor Hasp, 1 1/2" opening
20” X 14” TIME TO REORDER LOCKOUT TAGS TIME TO REORDER LOCKOUT TAGS Shadow effect enlarged for detail Shadow printed on board shows lockout/tagout devices are removed for use. Durable 14" x14" x 0.063" aluminum board has aluminum pronged hooks to hang padlocks and hasps. Thick, molded, clear, plastic tag pockets measure 4 3/4"H x 3 5/8"W x 2"D. 6-Padlock Hanger Board Kit Identifies and displays lockout/tagout devices while storing supplies – at the same place. Durable 14" x 14" x 0.063" aluminum board with metal hooks to hang padlocks and clear plastic tag pocket. Part No. Description Size UOM PSL-1009 Board w/Kit 14" x 14" Each Part No. Description Size UOM PSL-1010 Board w/Kit 14" x 14" Each PSL-1011 Board Only Kit Contents:
6 Steel Padlocks, 3/4" shackle(keyed differently)
800.777.3300 | Panduit.com
- Conveniently store padlocks, tags, and lockout devices in one common area
- Designs available to accommodate four, ten, or twenty people
74 Lockout / Tagout | Kit
Electrician Lockout Kit Contractor Lockout Kit Part No. Kit Contents Std. Pkg. Qty. PSL-PK-EA (1) Screwdriver (1) PSL-PK pouch (1) PSL-8 padlock (1) PSL-MLD multiple lockout (1) PSL-WS wall switch lockout (1) PSL-CBNT “No Tool” circuit breaker lockout (1) PSL-P plug lockout (5) PVT-30 blocking tags PSL-PK-EAP (1) Screwdriver (1) PSL-PK pouch (1) PSL-8 padlock (1) PSL-MLD multiple lockout (1) PSL-WS wall switch lockout (1) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (1) PSL-P plug lockout (5) PVT-30 blocking tags PSL-PK-EAPX (1) Screwdriver (1) PSL-PK pouch (1) PSL-MLD multiple lockout (1) PSL-WS wall switch lockout (1) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (1) PSL-P plug lockout (5) PVT-30 blocking tags PSL-PK-EA-F (1) Screwdriver (1) PSL-PK pouch (1) PSL-8 padlock (1) PSL-MLD multiple lockout (1) PSL-WS wall switch lockout (1) PSL-CBNT “No Tool” circuit breaker lockout (1) PSL-P plug lockout (5) PVT-30 blocking tags PSL-PK-EAKS (1) Klein Screwdriver (1) PSL-PK pouch (1) PSL-8 red non-conductive lockout padlock (1) PSL-MLD multiple lockout (1) PSL-WS wall switch lockout (1) PSL-CBNT “No Tool” circuit breaker lockout (1) PSL-P plug lockout (5) PVT-30 blocking tags PSL-PK Empty pouch for PSL-PK-EA Part No. Kit Contents Std. Pkg. Qty. PSL-KT-CONA (1) Screwdriver (1) PSL-KT case (6) PSL-8 padlocks (1) PSL-1A hasp (1) PSL-MLD lockout (3) PSL-WS wall switch lockout (3) PSL-CBNT “No Tool” circuit breaker lockout (3) PSL-P plug lockouts (15) PVT-98 tags PSL-KT-CONAP (1) Screwdriver (1) PSL-KT case (6) PSL-8 padlocks (1) PSL-1A hasp (1) PSL-MLD lockout (3) PSL-WS wall switch lockout (3) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (3) PSL-P plug lockouts (15) PVT-98 tags PSL-KT-CONAPX (1) Screwdriver (1) PSL-KT case (1) PSL-1A hasp (1) PSL-MLD lockout (3) PSL-WS wall switch lockout (3) PSL-P plug lockouts (15) PVT-98 tags. PSL-KT-CONA-F (1) Screwdriver, (1) PSL-KT case (6) PSL-8 padlocks (1) PSL-1A hasp (1) PSL-MLD lockout (3) PSL-WS wall switch lockout (3) PSL-CBNT “No Tool” circuit breaker lockout (3) PSL-P plug lockouts (15) PVT-98 “EQUIPMENT LOCKED OUT BY ...” safety tags in French PSL-KT-CONA-S (1) Screwdriver (1) PSL-KT case (6) PSL-8 padlocks (1) PSL-1A hasp (1) PSL-MLD lockout (3) PSL-WS wall switch lockout (3) PSL-CBNT “No Tool” circuit breaker lockout (3) PSL-P plug lockouts (15) PVT-98 tags in Spanish PSL-KT Empty plastic kit box for PSL-KT-CONA PSL-PK-EAP PSL-KT -CONA Metal Wall Mount Cabinet Safety Tool Bag Part No. Description Std. Pkg. Qty. PSL-STATION Metal Wall Mount Cabinet 1 Part No. Color Std. Pkg. Qty. PSL-BG Red 1
- Conveniently store lockout tools and accessories in one common area
- Durable steel case can be wall-mounted (nine mounting holes) or used as a portable case Red/Black Polyester Fabric
- Width: 18 inches
- Height: 11 inches
- Depth: 11 inches
75Kit & Cover | Lockout / Tagout Maintenance Lockout Kit Power and Panel Distribution Lockout Kit Part No. Kit Content Std. Pkg. Qty. PSL-KT-MROA (1) Screwdriver (1) PSL-BX case (3) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-WS wall switch lockout (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-P plug lockout (1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle (1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle (1) PSL-BV2 ball-valve lockout (1) PSL-CL110 120 volt AC cord lockout (10) PVT-44 maintenance tags PSL-KT-MROAP (1) Screwdriver (1) PSL-BX case (3) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-WS wall switch lockout (2) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (2) PSL-P plug lockout (1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle (1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle (1) PSL-BV2 ball-valve lockout (1) PSL-CL110 120 volt AC cord lockout (10) PVT-44 maintenance tags PSL-KT-MROAPX (1) Screwdriver (1) PSL-BX case (1) PSL-MLD multiple lockout device (2) PSL-WS wall switch lockout (2) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (2) PSL-P plug lockout (1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle (1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle (1) PSL-BV2 ball-valve lockout (1) PSL-CL110 120 volt AC cord lockout (10) PVT-44 maintenance tags PSL-KT-MROA-F (1) Screwdriver (1) PSL-BX case (3) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-WS wall switch lockout (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-P plug lockout (1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle (1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle (1) PSL-BV2 ball-valve lockout (1) PSL-CL110 120 volt AC cord lockout (10) PVT-44 “DO NOT OPERATE” maintenance tags in French PSL-KT-MROA-S (1) Screwdriver (1) PSL-BX case (3) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-WS wall switch lockout (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-P plug lockout (1) PSL-V6A gate valve lockout, 2.50" to 6.50" diam. handle (1) PSL-V2A gate valve lockout, 1.00" to 2.50" diam. handle (1) PSL-BV2 ball-valve lockout (1) PSL-CL110 120 volt AC cord lockout (10) PVT-44 maintenance tags in Spanish PSL-BX Empty plastic kit box for PSL-KT-MROA Part No. Kit Content Std. Pkg. Qty. PSL-KT-PWR (1) Screwdriver (1) PSL-STATION metal wall mount cabinet (2) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-CBILNT “No Tool” circuit breaker lockout for I-Line™ (2) PSL-CBL large handle circuit breaker lockout (1) PSL-P plug lockout (25) PVT-23-Q tags PSL-KT-PWRP (1) Screwdriver (1) PSL-STATION metal wall mount cabinet (2) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (2) PSL-CBILNT “No Tool” circuit breaker lockout for I-Line™ (2) PSL-CBL large handle circuit breaker lockout (1) PSL-P plug lockout (25) PVT-23-Q tags PSL-KT-PWRPX (1) Screwdriver (1) PSL-STATION metal wall mount cabinet (1) PSL-MLD multiple lockout device (2) PSL-PCBNT PowerLOK™ “No Tool” circuit breaker lockout (2) PSL-CBILNT “No Tool” circuit breaker lockout for I-Line™ (2) PSL-CBL large handle circuit breaker lockout (1) PSL-P plug lockout (25) PVT-23-Q tags PSL-KT-PWR-F (1) Screwdriver (1) PSL-STATION metal wall mount cabinet (2) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-CBILNT “No Tool” circuit breaker lockout for I-Line™ (2) PSL-CBL large handle circuit breaker lockout (1) PSL-P plug lockout (25) PVT-23-Q “DO NOT OPERATE ELECTRICIANS AT WORK” tags in French PSL-KT-PWR-S (1) Screwdriver (1) PSL-STATION metal wall mount cabinet (2) PSL-8 padlocks (1) PSL-MLD multiple lockout device (2) PSL-CBNT “No Tool” circuit breaker lockout (2) PSL-CBILNT “No Tool” circuit breaker lockout for I-Line™ (2) PSL-CBL large handle circuit breaker lockout (1) PSL-P plug lockout (25) PVT-23-Q “DO NOT OPERATE ELECTRICIANS AT WORK” tags in Spanish PSL-KT -MROAP PSL-KT -PWRP 800.777.3300 | Panduit.com
76 Lockout / Tagout | Padlocks
Non-Conductive Safety Padlocks Aluminum body and shackle with non-conductive vinyl cover delivers protection against electrical hazards for maximum safety, specifically in lockout/tagout applications. Padlock is available with the standard 1.77" body or 3.00" long body design that allows safety message to be displayed on the padlocks in two languages. Body Height 1.77" (45.2mm) Body Height 3.00" (76.2mm) Color Std. Pkg. Qty.Part Number PSL-8BL PSL-8BL-LB Black PSL-8BU PSL-8BU-LB Blue PSL-8GR PSL-8GR-LB Green PSL-8OR PSL-8OR-LB Orange PSL-8 PSL-8-LB Red PSL-8YL PSL-8YL-LB Yellow PSL-8PU PSL-8PU-LB Purple PSL-8BR PSL-8BR-LB Brown Body Height 1.62" (41.1mm) Shackle Height 1.00" (25.4mm) Body Height 1.62" (41.1mm) Shackle Height 3.00" (76.2mm) Body Height 1.25" (41.1mm) Shackle Height 1.00" (25.4mm) Color Std. Pkg. Qty.Part Number PSL-7BL PSL-7BL-LS PSL-12BL Black PSL-7BU PSL-7BU-LS PSL-12BU Blue PSL-7GR PSL-7GR-LS PSL-12GR Green PSL-7OR PSL-7OR-LS PSL-12OR Orange PSL-7 PSL-7-LS PSL-12 Red PSL-7YL PSL-7YL-LS PSL-12YL Yellow PSL-7PU PSL-7PU-LS PSL-12PU Purple PSL-7BR PSL-7BR-LS PSL-12BR Brown Specialty Padlocks Part No. Part Description Color Std. Pkg. Qty. PSL-9 Harsh environment padlock; shackle height 1.00" (25.4mm) Silver 1PSL-9-LS Harsh environment padlock; shackle height 3.00" (76.2mm) PSL-CS Flexible shackle padlock; shackle height 5.00" (127.0mm) Red Harsh environment padlocks are created with a solid brass body with a chrome finish and stainless steel shackle for use in severe weather and environmental conditions. Flexible shackle padlocks allow movement of the lock body in order to close the panel door Aluminum Padlocks Solid aluminum body with anodized aluminum finish design can withstand extreme environmental conditions for improved durability and enhanced corrosion resistance. These padlocks are available with standard 1.50" x 1.62" body or ultra-compact 1.25" x 1.37" body for lockout operations in tight spaces. PSL-8 and PSL-8-LB PSL-7 and PSL-7-LS PSL-9 and PSL-9-LS PSL-CS PSL-12
Padlocks | Lockout / Tagout 77 Part No. Color Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter Pins in Cyl. Shackle Material Std. Pkg. PSL-14ABL Black 1 21/64 34 31/32 24.5 17/32 13.5 1/4 6.5 4 Steel PSL-14BYL Yellow 1 3/4 49 7/8 25 13/16 20 9/32 8 5 Steel PSL-14BYL-LS 2 1/2 63 PSL-15ABU Blue 1 3/4 49 7/8 25 13/16 20 9/32 8 5 Stainless PSL-15ABU-LS 2 1/2 63 PSL-15BBU Blue 1 5/32 55 1 3/64 26.5 59/64 23.5 23/64 9 5 Stainless Weatherproof Padlock Part No. Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter Pins in Cyl. Std. Pkg. PSL-17ABL 1 11/16 43 13/16 21 13/16 20 1/4 6 4 PSL-17BBL 2 53 15/16 24 1 25 9/32 7 5 Part No. Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter PSL-18 2 53 1 25 1 25 5/16 8 1 PSL-18-LS 2 1/2 63 800.777.3300 | Panduit.com
- Solid brass body to stand up to the harshest environments
- Sealed lock body with cover seal and drainage channels to protect against water and dirt
- Inner components made from non-corrosive materials
- Standard locks are keyed differently. Also available in keyed alike and master keyed options (contact customer service for further details). Available in other colors by special order Non-Sparking Brass Padlock
- Shackle and body made from solid brass
- Inner components made from non-corrosive materials
- Color: Black
- Standard locks are keyed differently. Also available in keyed alike and master keyed options (contact customer service for further details). Brass Weatherproof Combination Padlock
- Forged brass body with stainless steel shackle
- 4-digit resettable code
- Inner components made from non-corrosive materials
- Resettable combination (comes with resettable tool)
- Color: Brass
78 Lockout / Tagout | Padlocks
Part No. Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter Pins in Cyl. Std. Pkg. PSL-13A 25/32 20 29/64 11.5 3/8 9.5 9/64 3.5 3 PSL-13B 31/32 24.5 17/32 13.5 33/64 13 5/32 4 PSL-13C 1 3/16 30 43/64 17 5/8 16 13/64 5 PSL-13D 1 9/16 40 29/32 23 7/8 22 15/64 6 5 PSL-13D-LS 1 37/64 40 PSL-13E 1 31/32 50 1 9/64 29 1 7/64 28 5/16 8 5 TITALIUM™ Padlock
- TITALIUM™ aluminum alloy lock body; light, yet secure
- Shackle made of hardened steel with NANO PROTECT™ coating for extra corrosion resistance
- Color: Gray
- Standard locks are keyed differently. Also available in keyed alike options (contact customer service for further details). Part No. Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter Pins in Cyl. Std. Pkg. PSL-16A 15/16 24 7/16 11 15/32 12 5/32 4 PSL-16B 1 9/64 29 33/64 13 19/32 15 13/64 5 PSL-16C 1 1/2 38 7/8 22 53/64 21 15/64 6.5 4 PSL-16C-LS 2 1/2 63 PSL-16D 1 3/4 43 15/16 24 15/16 24 1/4 6 4 PSL-16E 1 7/8 48 63/64 25 9/32 7 5 PSL-16F 2 9/32 58 1 1/4 32 1 1/4 32 5/16 8 5 Brass Padlock
- Solid brass body for extra corrosion resistance
- Shackle made from hardened steel
- Color: Brass
- Standard locks are keyed differently. Also available in keyed alike options (contact customer service for further details). Part No. Body Width Shackle Clearance Height Shackle Clearance Width Shackle Diameter Pins in Cyl. Std. Pkg. PSL-6ABU 1 1/4 35 5/8 15 19/32 15 3/16 5 4/5 1 PSL-6ABU-LS 25 2 50 PSL-6BU 1 1/2 44 3/4 20 13/16 18 1/4 7 PSL-6BU-LS 2 50 PSL-6CBU 1 59/64 49 29/32 23 25/32 20 5/16 8 PSL-6CBU-LS 2 50 PSL-6DBU 2 53 1 25 15/16 23 11/32 9 PSL-6DBU-LS 2 50 Laminated Steel Padlock
- Laminated steel with ETERNA™ coating on each laminate for extreme corrosion resistance
- Tough, countersunk rivets for extra strength
- High-precision 5-pin tumbler, drilling and pulling protected
- Color: Blue
- Standard locks are keyed differently. Also available in keyed alike options (contact customer service for further details).
Cover & Padlocks | Lockout / Tagout 79 Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-TG1 Brass padlock identification tag 12 48 PSL-SC Padlock shackle collar and rivet MTB1D-Q Brass identification tag 1.00" (25.4mm) diameter 25 250 MT172W38-C Stainless steel tag 1.72" x 0.38" (43.7mm x 9.7mm) 100 1000 Metal I.D. Tags and Collars Padlock Overlaminate Label Instantly identify the padlock.
- Write on the surface with pen or pencil — name, date, and any other identification necessary
- 9"W x 0.875"H self-adhesive vinyl label has peel-off liner
- Half of label has printed and writable area and the other half is clear to wrap and protect written area Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-PE1 Padlock eyes, angled (metal mounting screws included) 1 10 PSL-PE2 Padlock eyes, straight (wood mounting screws included) Part No. Danger Message Std. Pkg. Qty. PSL-1028 DO NOT REMOVE THIS LOCK PSL-1029 EQUIPMENT LOCKED OUT Padlock Eyes Part No. Part Description Std. Pkg. Qty. Std. Ctn. Qty. PSL-PC Heavy duty zinc plated steel chain with chain holder attached 1 10 Steering Wheel Covers Prevent others from driving a vehicle that is disabled or undergoing maintenance.
- Flexible, reinforced vinyl cover
- Backside of upper half has stitched pocket to slip over steering wheel
- Secure cover to steering wheel to prevent removal
- 3/8" metal grommeted hole at bottom accommodates 1 1/2" hasp with padlocks (sold separately)
- Octagon shape reinforces lockout status and conveys STOP Chain Attachment 16" PSL-1075 20" PSL-1078 24" PSL-1081 16" PSL-1076 20" PSL-1079 24" PSL-1082 16" PSL-1077 20" PSL-1080 24" PSL-1083 800.777.3300 | Panduit.com PSL-TG1 MTB1D-Q MT172W38-C PSL-SC
- Provides permanent identification of pipes, conduit, valves, cables and equipment in harsh environments
- All marker plates/tags can be embossed or laser etched with Panduit Factory Custom Marking Service* * For more information on the Panduit Custom Marking Service please contact cs@panduit.com
- Padlock eyes can be added to equipment to lock it out
- Surface mounted eyes are made of 0.13" (3.0mm) hard wrought steel
- Tamper resistant inside mounting eyes – 2.50" (64.0mm) wide, accept shackle diameters up to 0.63" (16.0mm) PSL-PE2 PSL-PE1
- Optional 9.00" (229.0mm) chain for permanently attaching lockouts at pre-designed locations
80 Lockout / Tagout | Cable & Hasp
Self-Laminating Padlock Labels Part No. Color Std. Pkg. Qty. Std. Ctn. Qty. PSL-PL1BLKY Black 25 150 PSL-PL1BLUY Blue PSL-PL1GRNY Green PSL-PL1REDY Red PSL-PL1WHTY White PSL-PL1YELY Yellow PSL-PL1REDY-D Red Label with DANGER header PSL-PL1REDY-P Red Label with DANGER header in Portuguese PSL-8-LABEL Red/Black/White 1 20
- Used to identify employees’ locks; employees sign the label, attach it to the padlock, and overwrap with the clear vinyl to protect the legend
- Available in six colors for departmental coding
- One-piece design is easy to use
- Width: 10.00 inches
- Height: 0.75 inches Labels are designed with blank write-on area for name and department designation and can be clearly identified with Panduit permanent marking pens. Braided Steel Cable
- Flexible poly-coated braided steel cable
- The cable loops can be intertwined and locked with a padlock
- Color: Black
- Available in a variety of diameters and lengths Steel Hasp
- Hardened steel construction for extra strength
- Hidden screws and hinge pins for extra security
- Corrosion protected galvanized finish
- Color: Silver
- Available in 5 different sizes Part No. Eye Loop Diameter Length Std. Pkg. Qty.In. mm In. mm PSL-PH1 23/64 9 3 75 1 PSL-PH2 33/64 13.4 3 3/4 95 PSL-PH3 4 1/2 115 PSL-PH4 5 1/4 135 PSL-PH5 6 1/2 155 Part No. Diameter Length Std. Pkg. Qty.In. mm ft. cm PSL-PC31-6 5/16 8 6 200 PSL-PC31-10 10 250 PSL-PC38-6 3/8 10 6 200 PSL-PC38-16 16 500 PSL-PC38-33 33 1000
NFPA & HMCIS | Haz-Com / GHS 81800.777.3300 | Panduit.com NFPA Placard Sign Kits Hazardous Material Labels Chemical Identifier Roll Labels PHC0075 PHC0079 Adhesive-Poly, 1 1/2" x 3 7/8" 500 PHC0074 PHC0076 Self-Laminating Vinyl, 1" x 3" 100 Identify hazardous chemicals with appropriate information.
- Write-in chemical name, hazard ratings and PPE
- Self-laminating has clear flap to protect writing
- Adhesive-poly in roll of 500
- Self-laminating vinyl in roll of 100 NFPA HMCIS Easy installation and convenient for instant on-site classification of chemical hazard identification.
- Kit includes: 1 blank placard, 15 numbers (3 sets of 0-4), 7 hazard symbols, and NFPA wallet guide
- 0.004" adhesive vinyl placards with clear, self-adhesive hazard panels
- Blank colored placards and self-adhesive hazard panels also available separately On-the-spot chemical hazard identification.
- Write-in chemical name, hazard ratings, and PPE information
- Adhesive vinyl Size UOM 3 1/2" x 5" Each HMCIS Protective Equipment PHC0077 Hazard Panels Blank Placard Placard Kit Blank Placard SizePart No. UOM Part No. UOM PHC0124 Kit PHC0082 Each 4" x 4" PHC0123 PHC0080 10" x 10" PHC0125 PHC0081 15" x 15" *Add desired hazard panel number or symbol code after part number. Number Example: Part No. PHC4X4N + Hazard Panel Number 2 = PHC4X4N2 Symbol Example: Part No. PHC4X4 + Symbol Code RAD = PHC4X4RAD To Order Hazard Panels: Number Part No. Symbol Part No. Fits Placard Char. Height UOM PHC4X4N* PHC4X4* 4" x 4" 1" EachPHC10X10N* PHC10X10* 10" x 10" 4" PHC15X15N* PHC15X15* 15" x 15" 6" Additional sizes and materials available. RAD COR ACD ALK WTR OXY SAHazardous Material Classification Sign Properly identify the four hazard ratings of chemicals and materials on hand.
- Post on or in area of chemical containers
- Write in hazard ratings and chemical name for on-the-spot identification 10" x 7" 1007B4845 Material Code UOM Adhesive Vinyl PVS Each Polyethylene Plastic PRS To Order: Add material code before part number. Example: Material Code PVS + Part No. 1007B4845 = PVS1007B4845Wallet Cards Quick reference fits in employee’s pocket.
- Color-printed plastic in three front styles: NFPA, HMCIS and Combo
- Back features hazard rating code index definitions
- Measures 2 1/8" x 3 3/8"
- Available each UOM Each NFPA Placard Sign Kits NFPA Flip Placard Sign Display the four-color NFPA diamond format for the hazard categories.
- 10" x 7" sign available in 0.040" aluminum
- Adhesive hazard panels printed black on clear to apply on-site
- Kit includes: 1 sign, 15 numbers (3 sets, 0 – 4), 7 specific hazard symbols, NFPA wallet guide Flip and change panels to reflect any hazard.
- Aluminum flip panels display the hazard rating required by NFPA 704
- 15 1/2" x 15 1/2", 0.063" sturdy, rust-proof aluminum backboard
- 0.120" clear plastic face fits over placard with center screw
- Withstands weather and other environmental conditions
- 3/16" corner mounting holes UOM Kit Part No. UOM PHC0128 Each Comply with OSHA standard 29 CFR §1910.1200, commonly known as the “Right-To-Know” standard. PHC0126 PHC0127 NFPA PHC0122 HMCIS PHC0078
82 Haz-Com / GHS | Haz-Waste & NFPA
Drum & Container Labels PHC0139 PHC0138 PHC0136 PHC0134 PHC0135 PHC0137 PHC0132 PHC0133 Label drums and containers to identify contents considered hazardous for handling.
- Available with peel-off liner in: Adhesive Coated Paper and flexible Adhesive-Poly Sheet
- Labels measure 6" x 6"
- Package of 25 or 100 To Order Labels: Add material/quantity code after part number. Example: Part No. PHC0139 + Material/Quantity Code PQ = PHC0139PQ Adhesive Coated Paper Adhesive-Poly Sheet Std. Pkg. Qty.Code Code PQ VQ 25 PC VC 100 Std. Pkg. Qty. PCB Labels Available in Adhesive-Poly Sheet, Package of 25 only Attach tags to hazardous material containers that are difficult to label with adhesive marking. Tags contain NFPA or HMCIS symbols to help communicate and comply with OSHA 29 CFR 1910.1200 by conveying important chemical hazard information. Fill in the hazard code and related information for handling and exposure to hazardous chemicals. Use Hazardous Waste tags to comply with EPA (40 CFR part 262.32) and DOT (49 CFR part 172) regulations to mark hazardous waste. Hazardous Material Tags How to Order Tags: Select Material Code: PCT-1 Select Tag Base Part Number: 11182 Select Package: 5/Pk – (blank); 25/Pk – -Q3 Combine Codes in Specific Order for Complete Part Number: 5/Pk – PCT -1118; 25/pk – PCT -1118-Q4 Available Materials Codes Poly Cardstock PCT- Rigid Plastic PVT- Available Packages Codes Pk. of 5 (blank) Pk. of 25 -Q Back Front 1118 Back Front 1119 Back - protective equipment; chemical’s severity; chemical name; target organ. Back - quick reference to the hazard code index; definitions. Back Front 1120 Back - chemical name; route of entry; health hazards; physical hazards; target organs and effects. Back Front 1124 Back - protective equipment; chemical’s severity; chemical name; target organ.
GHS Pre-Printed Hazard Symbols Write-On GHS Tags and Signs Hazard Pictogram Part Number Size 1.00" Part Number Size 2.00" Part Number Size 4.00" Exploding Bomb PVS0101GEX PVS0202GEX PVS0404GEX Gas Cylinder PVS0101GGP PVS0202GGP PVS0404GGP Flame Over Circle PVS0101GOX PVS0202GOX PVS0404GOX Flame PVS0101GF PVS0202GF PVS0404GF Corrosion PVS0101GC PVS0202GC PVS0404GC Skull and Crossbones PVS0101GST PVS0202GST PVS0404GST Exclamation Mark PVS0101GAT PVS0202GAT PVS0404GAT Health Danger PVS0101GHD PVS0202GHD PVS0404GHD Environmental PVS0101GE PVS0202GE PVS0404GE GHS | Haz-Com / GHS800.777.3300 | Panduit.com New Globally Harmonized Standard (GHS) Label Format Required Elements Write-on tags and signs allow for quick and easy labeling for compliance with the new GHS requirements. GHS tags and signs are for use with PVS006006G* Pictogram Labels (sold separately). Nine hazard pictograms available on cards are in compliance with the GHS standard. Labels are vinyl material for indoor or outdoor use. Available in four size options:
- 1.00" with 16 labels per card
- 2.00" with 4 labels per card
- 4.00" with 2 labels per card *Custom Printed GHS Labels are also available. Please visit www.panduit.com/ghs for more information. FIRST AID Chemical Name Chemical Identifiers Hazard Statement First Aid Statement Precautionary Statement Company Name Address Phone Vinyl Tag 5.75"H x 3.00"W PVT -GHS-Q Vinyl Sign 3.00"H x 5.00"W PVS0305GHS 3. Signal Word: Indicates relative level of hazard. “DANGER” is used for most severe instances; “WARNING” is less severe. 4. Precautionary Statement: Indicates recommended measures to be taken to minimize or prevent adverse effects from exposure to a hazardous chemical. 5. Hazard Statement: Describes the nature of the hazard(s) of a chemical and often the degree of the hazard. 2. Pictogram Hazard Symbols in Red Diamonds: Indicates what type of risk physical/chemical, health, or environmental. 6. Manufacturer Information: Company name, address, and phone number. 1. Product Identifier or Name:
Part No. Size C400X200YPT-G1 2.50" x 4.00" C400X400YPT-G1 4.00" x 4.00" C400X600YPT-G1 4.00" x 6.00" Part No. Size C400X200YPT-G2 2.50" x 4.00" C400X400YPT-G2 4.00" x 4.00" C400X600YPT-G2 4.00" x 6.00" Part No. Size C400X200YPT-G3 2.50" x 4.00" C400X400YPT-G3 4.00" x 4.00" C400X600YPT-G3 4.00" x 6.00" Part No. Size C400X200YPT-G4 2.50" x 4.00" C400X400YPT-G4 4.00" x 4.00" C400X600YPT-G4 4.00" x 6.00" Haz-Com / GHS | GHS GHS Print On-Demand Thermal Transfer Labels Print from the Easy-Mark Plus (add TM) Labeling Software or Easy-Mark™ Labeling Software directly to die cut polyester labels that match the formats in the software. Labels feature 1, 2, 3, or 4 red pre-printed diamonds for one-pass printing of the two-color GHS labels; 250 labels per roll.
1 Diamond Thermal Transfer Labels
2 Diamond Thermal Transfer Labels
3 Diamond Thermal Transfer Labels
4 Diamond Thermal Transfer Labels
GHS Hazard Pictogram and Classes Physical/Chemical Risk Health Risk Environmental Risk Flame Flammables, Pyrophoric, Self-Heating, Emits Flammable Gas, Self-Reactive, Organic Peroxides Corrosion Skin Corrosion/ Burns and Eye Damage Exclamation Mark Irritant (skin and eye), Skin Sensitizer, Acute Toxicity (harmful), Narcotic Effects, Respiratory Tract Irritant, Hazardous to Ozone Layer Exploding Bomb Explosives, Self-Reactive, Organic Peroxides Gas Cylinder Gases under pressure Flame over Circle Oxidizers Corrosion Corrosive to Metals Skull and Crossbones Acute Toxicity (fatal or toxic) Environmental Aquatic Toxicity Health Danger Carcinogen, Mutagenicity, Reproductive Toxicity, Respiratory Sensitizer, Target Organ Toxicity, Aspiration Toxicity
Size Material Code Std. Pkg. Qty. 8 1/2" x 3 7/8" Poly Cardstock PCT- Rigid Plastic PVT- 1121 1122 1123 Standard Back Comments Refer to Safety Data Sheet for more information. DANGER WARNING Label set includes 9 pictograms and 2 signal words Attach tags to chemicals in the workplace, and add the appropriate signal word and GHS pictogram labels to identify the hazards.
- Large tags with space to write in the product/chemical identification, hazard statements and additional comments on the back
- Label set of nine pictograms and the two approved signal words “Danger” and “Warning” are included for each tag and made of adhesive vinyl
- Available in two stock materials, in packs of 5 To Order Tags: Add material code before part number. Example: Material Code PCT- + Part No. 1121 = PCT-1121 GHS | Haz-Com / GHS 800.777.3300 | Panduit.com Flame 1" x 1" PHC02 2" x 2" PHC11 Flame Over Circle 1" x 1" PHC03 2" x 2" PHC12 Exploding Bomb 1" x 1" PHC04 2" x 2" PHC13 Skull & Crossbones 1" x 1" PHC07 2" x 2" PHC16 Corrosion 1" x 1" PHC05 2" x 2" PHC14 Gas Cylinder 1" x 1" PHC06 2" x 2" PHC15 Exclamation Mark 1" x 1" PHC08 2" x 2" PHC17 Health Hazard 1" x 1" PHC10 2" x 2" PHC19 Environment 1" x 1" PHC09 2" x 2" PHC18 Non-mandatory GHS Pictogram Labels Pictogram labels comply with the Globally Harmonized System.
- Identify hazards associated with chemicals
- The Hazard Communication Standard (HCS) requires eight of the nine GHS pictograms
- The environment pictogram is non-mandatory since environmental hazards fall outside OSHA ’s jurisdiction
- Available in adhesive-coated paper and adhesive-poly sheet
- 250 or 500 per roll To Order Labels: Add material/quantity code after part number. Example: Part No. PHC02 + Material/Quantity Code PB = PHC02PB Adhesive Coated Paper Adhesive-Poly Sheet Std. Pkg. Qty.Code Code PS VS 250 PB VB 500
86 Haz-Com / GHS | Reference & Training
Part No. Description UOM PHC0001 English EachPHC0119 Spanish English Back English Front PHC0001 English PHC0131 Spanish PHC0120 Sistema Globalmente Armonizado (SGA) Etiquetas SGA La ilustración a continuación identifica los componentes de la etiqueta SGA. El diseño de la etiqueta actual y el esquema pueden variar y están sujetos a la discreción de la autoridad competente. Pictogramas SGA En la foto aparecen los símbolos de peligro estándar que se utiliza en el SGA. Los símbolos pueden ser utilizados individualmente y en combinación para definir el riesgo o riesgos específicos del producto químico. Llama (Inflamables) Bomba explotando (Explosivos) Llama sobre círculo (Oxidantes) Corrosión (Corrosivos) Calavera y tibias cruzadas (Toxicidad aguda) Botella de gas (Gases bajo presión) Signo de exclamación (Irritantes/ Sensibilizadores/ Otros peligros) Peligro para la salud (Peligro de toxicidad especifica) Medio Ambiente (Peligros acuáticos) PELIGRO Líquido y vapor muy inflamable. Causa irritación severa a los ojos. ACETONA Manténgase alejado del calor, chispas, y llamas - No fume. Tome medidas de precaución contra descargas estáticas. Evite la luz solar directa. Mantenga el envase cerrado cuando no esté en uso. Mantenga en un lugar fresco/bajo en temperatura, bien ventilado, lejos de fuego y fuentes de ignición. Use solo en un área bien ventilada. Evite el contacto con los ojos, piel, y ropa. Use el equipo de protección personal adecuado, evite el contacto directo. Enjuague los ojos con agua durante al menos 15 minutos manteniendo los párpados abiertos. Dirección: Ciudad: Estado: Código Postal: Teléfono: Número CAS: 67-64-1 Líquido In/f_lamable de Categoría 2 y Irritante Ocular de Categoría 2A Nombre de la Compañía: Identificador del producto Debe coincidir con el nombre químico que aparaece en las Hojas de Datos de Seguridad de (Materiales). Palabra de advertencia Indica el nivel relativo de la gravedad del peligro. “Peligro” y “Advertencia” son las palabras de señales del SGA. Indicaciones de Peligro Una frase asignada a una clasificación y categoría que describe la naturaleza de los riesgos del producto. Pictogramas Composiciones gráficas que visualmente transmiten la información sobre riesgos específicos. Declaraciones de PrecauciónDescribe las medidas recomendadas para minimizar o prevenir los efectos adversos resultantes de la exposición. Identificación del Proveedor El nombre, dirección y teléfono del fabricante o proveedor. “Los pictogramas de riesgos del SGA, la palabra de advertencia y las indicaciones de peligro deben estar ubicados juntos en la etiqueta. La autoridad competente podrá optar por ofrecer un esquema específico para la presentación de estos y para la presentación de la información preventiva, o permitir la discreción del proveedor.” Para más información, por favor, consulte la Comisión Económica de las Naciones Unidas para Europa (UNECE) y la Administración de Seguridad y Salud Ocupacional (OSHA). Nota: La informacion incluida en este cartel se cree que es correcta y actual. Sin embargo, Accuform no lo garantiza en esta sentido y no es responsable de como se utilice este producto. Los usuarios son responsables de determinar si el producto es apropiado para sus respectivas aplicaciones. R.2011. Keep a visual reminder of GHS label and pictogram requirements close at hand. Post GHS label and pictogram guidelines for quick reference.
- 18" x 24" plastic laminate poster
- Displays easy-to-understand information on GHS labels and pictograms
- Label & pictogram. Guidelines for quick reference. Part No. Description UOM PHC0131 English Each PHC0120 Spanish
- Double-sided plastic wallet card
- One side shows a representation of the nine standard GHS pictograms, while the flip side shows a GHS label example
- Measures 3 3/8" x 2 1/8" Training Posters Inform employees and support your hazard communication program.• Plastic laminated posters provide instructional information regarding chemical identification and hazard communication
- SDS poster summarizes the information found in the 16 sections OSHA outlines in its revised Haz-Com standard
- Haz-Com poster includes information pertaining to both NFPA and HMCIS SDS, 20" x 32" PHC0130 Haz-Com, 18" x 24" PHC0129 Part No. Description UOM PHC0130 SDS Each PHC0129 Haz-Com GHS Hazard Communication Training Kit Panduit GHS Hazard Communication Training Kit provides instruction on OSHA
1910.1200 Hazard Communication
Standard, including changes related to Globally Harmonized System for the Classification of Hazardous Chemicals (GHS). Included is a seventy minute video with instructor led training on setting up a Hazard Communication Program and understanding the new labeling and safety data sheet requirements. The companion CD provided consists of PowerPoint slides, PDF files of the quiz, training record and certificate of completion. Part No. Kit Contents PSL-GHS-TRAIN (1) Panduit GHS Hazard Communication Training DVD (1) Panduit GHS Hazard Communication Training Companion CD (1) Leaders Guide (1) Participant Quiz (1) Participant Quiz Answers (1) Training Record (4) 4" x 6" Acetone GHS label sample (1) PSL-GHSPOSTE GHS Training Poster (25) PSL-GHSWALLETE GHS Training Wallet Cards
Traffic Control Signs | Traffic Signs 87 Traffic Signs Post traffic signs to safely control and regulate the flow of vehicles and pedestrians.
- Constructed of heavy-duty, 0.080" aluminum, rustproof to withstand weather conditions
- Reflective face for added bounce-back light visibility from headlights and other light sources
- Abrasion-resistant face is also UV-resistant to prevent fading for years of outdoor exposure
- Top and bottom center holes for post- or fence-mount installation Materials Engineer-Grade Prismatic – Good choice for added visibility in low-light conditions. Type I High-Intensity Prismatic – Better choice for greater visibility with 3X brighter than Engineer-Grade. Type III, IV, X Engineer-Grade Prismatic High-Intensity Prismatic SizePart No. Part No. PTS075 PTS080 18" x 18" PTS186 PTS083 24" x 24" PTS187 PTS084 30" x 30" PTS188 PTS085 36" x 36" Engineer-Grade Prismatic High-Intensity Prismatic Size SPEED LIMIT 5 Part No. SPEED LIMIT 10 Part No. SPEED LIMIT 15 Part No. SPEED LIMIT 20 Part No. SPEED LIMIT 5 Part No. SPEED LIMIT 10 Part No. SPEED LIMIT 15 Part No. SPEED LIMIT 20 Part No. PTS103 PTS091 PTS093 PTS095 PTS102 PTS090 PTS092 PTS094 18" x 12" PTS123 PTS111 PTS113 PTS115 PTS122 PTS110 PTS112 PTS114 24" x 18" Engineer-Grade Prismatic High-Intensity Prismatic SizePart No. Part No. PTS141 PTS140 24" x 24" PTS143 PTS142 30" x 30" PTS145 PTS144 36" x 36" Speed Limit Signs Stop Signs & Yield Signs 800.777.3300 | Panduit.com
88 Traffic Signs | Traffic Control Signs
18" x 12" PTS165 18" x 12" PTS167 24" x 18" PTS198 18" x 24" PTS082 18" x 18" PTS151 24" x 18" PTS089 24" x 18" PTS087 18" x 18" PTS153 18" x 12" PTS14918" x 12" PTS147 24" x 18" Arrow rt. PTS196 Arrow lt. PTS194 18" x 24" PTS077 18" x 30" PTS079 24" x 24" PTS190 30" x 30" PTS192 18" x 12" PTS068 18" x 12" PTS070 18" x 12" PTS05818" x 12" PTS063 18" x 12" PTS066 18" x 12" PTS065 18" x 12" PTS069 18" x 12" PTS067 18" x 12" PTS061 18" x 12" PTS059 18" x 12" PTS060 18" x 12" PTS06218" x 12" PTS064 Parking Signs 18" x 12" PTS05518" x 12" PTS051 18" x 12" PTS054 18" x 12" PTS05718" x 12" PTS05218" x 12" PTS053 18" x 12" PTS056 18" x 12" PTS005 18" x 12" PTS00618" x 12" PTS004 18" x 12" PTS00218" x 12" PTS00318" x 12" PTS001 18" x 12" PTS007 24" x 18" PTS200 Material – Engineer-Grade Prismatic Material – Engineer-Grade Prismatic
89Temporary Traffic Control Signs | Traffic Signs 800.777.3300 | Panduit.com Single Spring Sign Stand NCHRP-350 compliant. Single coil spring-loaded design adds stability and flexibility to stand up to wind loads and gusts.
- Leg levers for easy deployment – opens to a wide footprint of 67 1/2" x 42"
- Ergonomic design also allows users to lift up on legs to drop them into place
- Folds to compact size, 8" x 6" x 25 1/4"
- Powder-coated, galvanized steel frames with non-slip rubber tips
- Weight: 24 lbs.
- For use with 36" or 48" diamond shaped roll-up construction signs with fiberglass cross-ribs (sold separately on next page)
- Meets Manual on Uniform Traffic Control Devices (MUTCD)specifications Part No. UOM PTS202 Each Spring-Less Sign Stand Part No. UOM PTS201 Each NCHRP-350 compliant. Economy-grade, roll-up stand for use in moderate winds and light traffic conditions.
- Opens quickly and easily to a wide, 66 1/2" x 43 1/2", stable footprint
- Folds to compact size, 6 1/2" x 8 1/2" x 25"
- Powder-coated, galvanized steel frames with non-slip rubber tips
- Weight: 22 lbs.
- For use with 36" or 48" diamond shaped roll-up construction signs with fiberglass cross-ribs (sold separately on next page)
- Meets Manual on Uniform Traffic Control Devices (MUTCD) specifications
90 Traffic Signs | Temporary Traffic Control Signs
Roll-Up Construction Signs Quickly set up highly visible signs for temporary warning of hazard and construction areas.
- Flexible fabric, quick and easy to setup and takedown – roll up for compact storage and portability
- Safety orange with contrasting black messages and symbols
- Cross-Ribs (sold separately) insert into four corner pockets, providing rigid support
- Overlay signs snap on to change directional or distance message Materials: Mesh Vinyl (V) – Non-reflective, ideal for daytime only applications Fluorescent Vinyl (F) – Non-reflective, UV stable bright colored vinyl for daytime use only Reflective Vinyl (R) – High-Intensity retro-reflective fiber reinforced nylon fabric, ideal for attention getting and low-light conditions *Available Overlays Material & Size Code Signs Overlays* 36" 36" Mesh Vinyl V36 Each EachFluorescent Vinyl F36 Reflective Vinyl R36 To Order: Add material & size code after part number. Example: Part No. PTS009 + Material/Size Code V36 = PTS009V36 Part No. UOM PTS203 Each for 36" PTS018 for 36" PTS019for 36" PTS016 Size A for 36" PTS017 Size B Cross-Ribs 36" PTS009 Requires Size B Left Overlay 36" PTS011 36" PTS012 Requires Size A Left Overlay 36" PTS013 36" PTS014 36" PTS015 36" PTS008 36" PTS010 Rigid support keeps roll-up signs deployed and visible.
- Constructed of durable fiberglass material
- Inserts into roll-up sign four-corner pockets
- For use with 36" Roll-Up Construction Signs Cautionary Signs Engineer-Grade Prismatic High-Intensity Prismatic Size SLOW Part No. PEDXING Part No. SLOW Part No. PEDXING Part No. PTS163 PTS161 PTS162 PTS160 24" x 24" — PTS170 — PTS169 30" x 30"
91Traffic Accessories | Traffic Signs To Order: Add material & size code after part number. Example: Part No. PTS009 + Material/Size Code V36 = PTS009V36 Steel U-Channel Posts Cast Iron Base and Steel Post Sign Mounting Brackets and Plate Everything you need to post-mount your sign.
- Available in 2 colors, green or galvanized
- Two lengths – 6-ft., 8-ft.
- Hardware set (sold separately) includes – 2 bolts, 2 nuts, 4 washers Mount signs with stable post and weighted base that can be moved as needed.
- Solid, heavyweight cast iron base available in 14" and 18" diameters
- 1 7/8" outside diameter x 48"H steel post can accommodates sign sizes up to 24" x 24"
- Sign mounting hardware included Fence Mount Brackets
- Easily secure your sign to a chain link fence
- Rust-proof aluminum with mounting holes to attach sign through fence spaces Sign Mounting Plate
- Keep signs flat when mounting to U-Channel post
- Includes adaptor ringbolt, washer, plate and hex nut
- Two sets required per sign Optional wheel attachment for easy tilting and moving – fits 14" base only. Price per Each Length Green Finish Galvanized Finish Part No. UOM Part No. UOM Standard Weight – 1.12 lb/foot 6-ft. PTS174 Each PTS175 Each Heavy Weight – 2.00 lb/foot 6-ft. PTS173 Each PTS172 Each 8-ft. PTS176 PTS177 Description Part No. UOM Hardware Set PTS171 Set Part No. Fits Sign UOM PTS183 12"H EachPTS184 18"H PTS185 24"H Part No. UOM PTS182 Set Part No. Base Size Weight UOM PTS179 14" dia. 27 lbs. Each PTS180 18" dia. 37 lbs. Part No. UOM PTS178 Each Sign sold separately Fence Sign Holder Bracket Post signs and warnings on chain link fences.
- Galvanized steel bracket
- Universal to work with nearly any size chain link fence
- Protects signs from damage by distributing pressure along the surface area of the bracket
- Two brackets required for post mounting
- Includes 5/16"-18 thread, 3/4" long stainless steel bolt and nylon washer – works well for use with 3/8" sign mounting holes
- Sized to fit most signs Part No. UOM PBB0080 Each Portable Sign Stand Ideal for temporary applications or crosswalks.
- 6-ft., white powder-coated steel post with pre-drilled mounting holes
- Base plate with locking pin, and a road-gripping, 40 lb., recycled rubber base
- When disassembled, bases nest for easy storage
- NCHRP-350 compliant Part No. Description UOM PTS181* Portable Sign Stand Each Part No. Description UOM PTS154 Stop Sign Kit Kit *Sign sold separately Includes – (1) Portable Sign Stand, (1) 24" x 24" Engineer-Grade Prismatic Aluminum Stop Sign, (1) Hardware Set Blinker Signs Maximum Visibility in any Environment.
- Flashing LED lights, combined with DG High-Prism sheeting, provide superior luminance and visibility
- Eco-friendly, 13 watt solar panel, 6VDC battery charger require no AC
- Low power allows for smaller panel and cleaner look
- LED automatically measures available light and adjusts the LED flash brightness accordingly
- Up to 30 day autonomy (flashing 24/7)
- Heavy-duty aluminum construction with fully enclosed wiring withstands harsh elements
- Attaches to 2 3/8" post with mounting brackets (sold separately)
- MUTCD-compliant for public roadway use 30" x 30" PTS156 30" x 30" PTS155 Size UOM 30" x 30" Each 800.777.3300 | Panduit.com
92 Traffic Signs | Traffic Accessories
Non-Regulatory Traffic Signs STOP 12" x 12" 18" x 18" 24" x 24 B4472 12" x 12" 18" x 18" B4939 12" x 12" 18" x 18" B4933 12" x 12" 18" x 18" 24" x 24 B4481 12" x 12" 18" x 18" B4477 These signs are on non-reflective material. Intended for indoor or non-public roadway use. Speed Bump Signs 18" x 12" PTS167 18" x 12" PTS168 18" x 12" PTS15724" x 24" PTS159 30" x 30" PTS158 Security Stop Safety Signs 12" x 12" B4221 12" x 12" B4203 12" x 12" B4209 12" x 12" B4219 12" x 12" B4201 Engineer-Grade Prismatic – Good choice for added visibility in low-light conditions Available Sizes Codes 12" x 12" 1212 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Select Size Code: 12122 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS1212B42014Select Sign Base Part Number: B42013 Available Sizes Codes 12" x 12" 1212 18" x 18" 1818 24" x 24" 2424 Available Materials Codes Adhesive Vinyl (Each) PVS Polyester Laminated Vinyl (Each) PLVS Polyethylene Plastic (Each) PRS Aluminum (Each) PAS Select Size Code: 12122 How to Order Signs: Select Material Code: PVS1 Combine Codes in Specific Order for Complete Part Number: PVS1212B44814Select Sign Base Part Number: B44813
Floor Tapes | Floor Signs & Tapes 93 Message Marking Tapes Reflective TapesMarking Tapes Mark specific areas and promote safety by identifying potential hazard areas with visible tapes.
- 0.006" vinyl adheres to floors, walls, piping, posts, beams, handrails, stairways, machinery, and equipment
- Waterproof, wear-resistant, minor resistance to acids, oils, grease, caustics, alkalis, and most solvents
- Permanent self-adhesive back Colors and combinations meet specific industry and OSHA 29 CFR §1910.144 warning requirements Part No. Size UOM Solid Colors PFM2X36 2" x 108-ft. Roll PFM2X60 2" x 180-ft. Checkerboard Pattern PFMC2X18 2" x 54-ft. Roll Stripe Pattern PFM2X18 2" x 54-ft. Roll PFM2X36 2" x 108-ft. Part No. Size UOM Solid Colors PFM3X36 3" x 108-ft. Roll PFM3X60 3" x 180-ft. Checkerboard Pattern PFMC3X18 3" x 54-ft. Roll Stripe Pattern PFM3X18 3" x 54-ft. Roll PFM3X36 3" x 108-ft. To Order: Add color code after part number. Example: Part No. PFM2X36 + Color Code WHT = PFM2X36WHT Color/Combination Code Application Solid Colors White WHT General FacilityGray GRY Brown BRN Black BLK Red RED Fire Protection Equipment & Danger Hazards Orange ORN Danger Points on Machines Yellow YEL Physical Hazards Green GRN First Aid & Safety Equipment Blue BLU Machinery being Worked On Purple PUR X-ray & Radiation Hazards Checkerboard and Stripe Pattern Black/Yellow BY General, Physical Hazards Red/White RW Fire Protection & Equipment Black/White BW Housekeeping, Aisles, Traffic, & Passageways Magenta/Yellow MY Radiation Areas Green/White GW Safety & First Aid Blue/White BLW Defective Equipment Orange/White OW Traffic and Caution Use marking tape with specific message to point out potential hazard areas.
- Bold contrasting message printed repeatedly
- 6-mil vinyl adheres to floors, walls, and equipment
- Clear overlaminate protective film resists dirt, light chemicals and light abrasions
- Permanent, self-adhesive back
- 2" x 54-ft. rolls UOM Roll PFM0114 PFM0115 PFM0116
- Safety-grade with ‘bounce-back’ reflectivity
- Improved daytime, low-light and night time visibility
- 0.0055" thick urethane tape
- Permanent adhesive with peel-off liner
- Suitable for outdoor use on poles, barricades, fences, buildings, private roads, and off-road vehicles Part No. Size UOM PFMR2X15 2" x 15-ft. RollPFMR2X30 2" x 30-ft. PFMR3X15 3" x 15-ft. To Order: Add color code after part number. Example: Part No. PFMR2X15 + Color Code BW = PFMR2X15BW Color Code Solid Colors Black BLK Blue BLU Green GRN Orange ORN Red RED White WHT Yellow YEL Stripe Colors Black/White BW Black/Yellow BY Orange/White OW Red/White RW Available colors with color code: 800.777.3300 | Panduit.com
94 Floor Signs & Tapes | Floor Tapes
Part No. Size UOM Corner PFMTS09 6" x 6" Each PFMTS10 12" x 12" 45˚ Corner PFMTS20 6" Each PFMTS19 12" T -Corner PFMTS11 6" x 9" Each PFMTS12 8" x 12" Quad Corner PFMTS17 9" x 9" Each PFMTS18 12" x 12" Part No. Length UOM Footprints PFMTS01 6" Pair PFMTS02 12" Part No. Size UOM Arrow PFMTS14 3" EachPFMTS15 6" PFMTS16 12" Square PFMTS05 3" x 3" Each PFMTS06 6" x 6" Circle, Dot PFMTS03 3" dia Each PFMTS04 6" dia Triangle PFMTS07 3" Each PFMTS08 6" Corner 45˚ Corner T-Corner Quad Corner Footprint Arrow Square Circle, Dot Triangle Mark pallets, storage, and walkways in your facility – ideal for 5S programs. Non-Slip Floor Marking Shapes To Order: Add color code after part number: Red – RED, Orange – ORN, Yellow – YEL, Green – GRN, Blue – BLU, White – WHT, Black – BLK. Example: Part No. PFMTS09 + Color Code GRN = PFMTS09GRN Overlaminated non-slip vinyl pebble-textured surface Color is sub-surface printed
- Self-adhesive 0.004" vinyl
- Protective non-slip, pebble-textured overlaminate
- Strong acrylic-based adhesive peel-off back liner
- Adhere to clean, smooth, dry surface
- Service temperature range: -20° to 140°F Non-Slip Floor Marking Tapes PFM0598 STAGING AREA STAGING AREA PFM0597 PFM0601 PFM0600 FORKLIFT TRAFFIC FORKLIFT TRAFFIC PFM0599 Use non-slip tapes to mark and identify aisles, pathways, and designated locations in your facility. Sub-surface printed 0.004" vinyl tapes are overlaminated with a 0.017" clear, protective pebble-textured tread. The dimpled non-slip surface is ideal for pedestrian traffic areas.
- Dual-layer, color vinyl and clear textured vinyl construction
- Strong acrylic-based adhesive peel-off back liner
- Adhere to clean, smooth, dry surface
- Service temperature range: -20° to 140°F
- Available in solid colors or with messages Message Tapes To Order Solid Color Tapes: Add color code after part number: Red – RED, Orange – ORN, Yellow – YEL, Green – GRN, Blue – BLU, White – WHT, Black – BLK. Example: Part No. PFMT2X100 + Color Code YEL = PFMT2X100YEL Size UOM 3"W x 50-ft. Roll Part No. Size UOM PFMT2X100 2"W x 100-ft. Roll PFMT3X100 3"W x 100-ft. Overlaminated non-slip vinyl pebble-textured surface Color is sub-surface printed
95Floor Tapes | Floor Signs & Tapes Floor Marking Shapes Mark directional traffic paths or hazardous areas on floors, stairways, and walls.
- 0.005" vinyl
- Individually die-cut shapes
- Aggressive, permanent, self-adhesive back
- Peel-off liner *Size for: Dot by diameter Available colors with color code: Red – RED, Blue – BLU, Green – GRN, Black – BLK, Yellow – YEL, Orange – ORN, White – WHT Size* Std. Pkg. Qty. UOM
250 Roll
4" 100 Roll 5 Pair Pkg. 12" To Order: Add color code after part number. Example: Part No. PFMD2 + Color Code BLU = PFMD2BLU PFMF6 PFMD4 PFMD2 PFMD3 PFMA4 PFMA2 PFMA3 12" PFMF12 Glow-in-the-Dark Tapes & Shapes Visibility and safety in emergency blackout situations
- Photoluminescent tapes and shapes store energy from any light source
- 10-hour glow rating
- 0.010" polyester with laminated gloss surface
- Permanent adhesive backing with peel-off liner Solid Color Stripe Pattern Arrow Pattern SizePart No. UOM Part No. UOM Part No. UOM PFM0243 Roll PFM0246 Roll PFM0249 Roll 2" x 15-ft. PFM0244 PFM0247 PFM0250 2" x 30-ft. PFM0245 PFM0248 PFM0251 3" x 15-ft. Size Std. Pkg. Qty. UOM
50 Roll
1 Pair Pkg. 12" Glow-in-the-Dark Tapes PFM0332 12" PFM0328 PFM0333 PFM0329 PFM0330 PFM0331 Glow-in-the-Dark Shapes Dots Arrows Footprints Dots Arrows Footprints * Size for: Arrow measured by width of point * Size for: Footprint is 6" or 12" length 800.777.3300 | Panduit.com
96 Floor Signs & Tapes | Floor Tapes
§1910.24 (f) Non-Skid Floor Shape Tapes Create a high-traction surface to prevent slips, trips, and falls.
- Durable surface provides good grip, wear resistance, and water resistance
- Suitable for indoor and outdoor environments
- Resists sliding, buckling, wrinkling, and peeling
- Black tape is 60-grit aluminum oxide compound layer fused onto thick PVC base; colored and striped tapes are 46-grit
- High-tack acrylic adhesive back
- Peel-off liner Get a finished look to your anti-skid tapes in pre-cut shapes.
- Rounded corners to prevent corners from lifting
- Aggressive 60-grit aluminum oxide compound layer fused onto a thick PVC base
- Peel-off liner with high-tack acrylic adhesive back
- Suitable for indoor and outdoor environments, water resistant Part No. Description Size UOM PFM0110 Square 5 1/2" x 5 1/2" Each PFM0109 Wide Strip 3" x 24" PFM0111 Cleat 6" x 24"PFM0112 Cleat w/ Refl. Yellow PFM0113 Cleat w/ Glow Cleat Cleat w/ Reflective Yellow Cleat w/ Glow SquareWide Strip
- Muted yellow appearance masks dirt and grime Part No. Size UOM Solid Black PFM0090 1" x 60-ft. Roll PFM0092 2" x 60-ft. PFM0094 3" x 60-ft. PFM0095 4" x 60-ft. PFM0097 6" x 60-ft. Part No. Size UOM Solid Yellow PFM0091 1" x 60-ft. RollPFM0093 2" x 60-ft. PFM0096 4" x 60-ft. Striped Black/Yellow PFM0103 2" x 60-ft. Roll PFM0105 4" x 60-ft. Part No. Size UOM Muted Yellow w/ Black Particles PFM0107 2" x 60-ft. Roll PFM0108 4" x 60-ft. Non-Skid Floor Signs High-traction, anti-skid, clear grit surface. 6" x 24". Sub-surface printed vinyl floor signs. High-tack, acrylic adhesive back. Peel-off liner. UOM Each PFM0040 PFM0046 PFM0047 PFM0041 PFM0045 RESTRICTED AREA PFM0044 PFM0042 PFM0043
Floor Tapes | Floor Signs & Tapes 97 Floor Label Frame System Textured Marking Tapes High Performance Marking Tapes Heavy-duty composite tape outperforms standard floor marking tapes. Printed 0.002" polyester tape with 2-mil gloss overlaminate provides superior durability for industrial facility and high plant traffic. Place and protect message, barcode and other identification on the floor in a sturdy frame system. Metal frame mounts directly to the floor with four concrete screws (included) and contains a clear protective cover to protect your label (not included) underneath. Beveled edges prevent damage from rollover of pallet jacks and forklift vehicles. Clear protective cover Concrete Screws Label frame Your Label PBB0085 PBB0086 Each Each PBB0081 PFM0001 10 Pkg. PBB0083 PFM0002 25 PBB0084 PFM0003 50 PBB0082 PFM0004 100 PFM0268 RESTRICTED AREA RESTRICTED AREA PFM0267 PFM0266 PFM0271 PFM0270 PFM0269 To Order Solid Color Tapes: Add color code after part number: Red – RED, Orange – ORN, Yellow – YEL, Green – GRN, Blue – BLU, White – WHT, Black – BLK. Example: Part No. PFMH2X100 + Color Code BLK = PFMH2X100BLK Part No. Size UOM PFMH2X100 2"W x 100-ft. Roll PFMH3X100 3"W x 100-ft. Size UOM 3"W x 50-ft. Roll
- High-gloss surface resists marks and smudges
- Resistant to abrasions, water, chemicals and heat
- High tack, acrylic adhesive back minimizes peel or lift
- Applies to clean, non- coated, smooth or rough surfaces, including concrete
- Low-profile reduces tears and scratches from skids and pallet jacks
- Removes easily without leaving residue or damage to the floor
- Minimum application temperature: 50°F
- Available in solid colors or with messages Low-profile grip vinyl tapes are ideal for indoor/outdoor and wet or dry environments.
- Reinforced vinyl with weather-proof adhesive system
- Slip-resistant, mild abrasive surface
- Install on smooth, clean and dry surfaces
- Low level reflectivity
- 3"W x 108-ft. long rolls
- Service temperature range: 0° to 150°F To Order: Add color code after part number: Red – RED, Blue – BLU, Yellow – YEL, White – WHT, Green – GRN. Example: Part No. PFMT3X36 + Color Code YEL = PFMT3X36YEL Part No. UOM PFMT3X36 Roll Small size:
- 8 1/2" x 5 1/2" x 1/8" all-aluminum oval frame
- 3 1/2" x 5" x 0.063" clear visible protective polycarbonate cover Large size:
- 12" x 7 1/2" x 1/8" all-aluminum oval frame
- 5" x 7" x 0.063" clear visible protective polycarbonate cover Message Tapes 800.777.3300 | Panduit.com
98 Floor Signs & Tapes | Floor Signs
17" PFM0071 17" PFM0074 17" PFM0072 17" PFM007617" PFM0073 17" PFM0075 17" PFM0060 17" PFM0062 17" PFM0061 17" PFM0054 17" PFM0055 17" PFM0056 17" PFM0057 17" PFM0058 17" PFM0059 Diamond Triangle Grab attention with non-slip floor message signs.
- Bold colors and graphics in unique shapes
- Self-adhesive vinyl floor signs are sub-surface printed
- Overlaminated with pebble-textured, non-slip layer
- Can withstand heavy foot traffic
- Permanent adhesive back with peel-off liner
- Signs adhere to smooth, clean, and dry surface Non-Slip Shape Floor Signs Place message and graphic signs outdoors on pavement.
- Adheres to asphalt, concrete and step-stones
- Conforms to rough, untreated surfaces like stone and cement
- High-performance adhesive back, foil-base material
- Non-laminate surface contains embedded glass beads for a non-slip texture - meeting NFSI and ASTM D2047 specifications
- Withstands normal to heavy walking foot traffic and other abrasions
- Apply to swept, clean, dry surface
- Application temperature range: 50° to 100°F
- For short- to long-term applications
- Removes easily, usually without any residues Pavement-Print Signs 17" PFM007817" PFM0082 17" PFM0088 17" PFM0077 17" PFM0080 17" PFM008417" PFM008617" PFM0089 17" PFM0083 17" PFM008517" PFM0081 17" PFM0079 17" PFM0087
Floor Signs | Floor Signs & Tapes 99 Non-Slip Floor Signs Non-slip, pebble-textured, clear surface withstands heavy pedestrian traffic. Image is sub-surface printed. Permanent, self-adhesive vinyl with peel-off liner. Round-Style 20" x 14" PFM0063 6" x 24" PFM0048 6" x 24" PFM0050 6" x 24" PFM0049 6" x 24" PFM0051 6" x 24" PFM0052 6" x 24" PFM0053 Step-Style Mat-style 20" x 14" PFM0069 20" x 14" PFM0064 Description UOM Round-Style Each Round-Style Glow Adhesive Mat-Style Step-Style 20" x 14" PFM0066 20" x 14" PFM0070 20" x 14" PFM0065 17" PFM0033 17" PFM003017" PFM002917" PFM0009 17" PFM0016 17" PFM0011 17" PFM0008 17" PFM0031 17" PFM0022 17" PFM002717" PFM002617" PFM0020 17" PFM0017 17" PFM0018 17" PFM0023 17" PFM0034 20" x 14" PFM0067 20" x 14" PFM0068 17" PFM001317" PFM001917" PFM001517" PFM0010 17" PFM0028 17" PFM0025 17" PFM0021 17" PFM0036 17" PFM0012 17" PFM0032 17" PFM002417" PFM0014 17" PFM0037 17" PFM0035 800.777.3300 | Panduit.com
100 Barriers & Barricades | Cones
Temporarily and quickly direct facility traffic.
- Slips into top of any standard, flexible traffic cone
- Rugged, 0.060" plastic
- Same message both sides
- Weather- and fade-resistant
- 10" x 14" PBB0068 PBB0070 PBB0074 PBB0069 PBB0073 PBB0071 PBB0077 UOM Each Part No. Height Weight UOM All Red/Orange - Standard PBB0165 12" 1.5 lbs Each PBB0126 18" 3 lbs PBB0167 28" 7 lbs PBB0169 36" 10 lbs PBB0170 12 lbs All Red/Orange - w/ reflective collars PBB0017 28" 7 lbs EachPBB0022 36" 12 lbs Fluorescent Yellow/Green - Standard PBB0166 18" 3 lbs EachPBB0168 28" 7 lbs PBB0171 36" 10 lbs Cones Brightly colored cones are ideal to mark hazardous areas.
- Durable, flexible spring-back design
- Molded PVC (Poly-Vinyl-Chloride) plastic
- UV stabilizers for fade resistance
- Stackable for easy transport and storage Meets applicable MUTCD and State Standards Universal Cone Adapter Universal Cone Adapter fits most standard traffic cones.
- Quickly and easily mount signs, flags and lights
- Can also be used with rope or barricade tape to form various sized barriers Orange No. Yellow Part No. UOM PBB0065 PBB0066 Each Sign and cone sold separately PBB0067 PBB0072 Pennant Flag Tapes Attention-getting pennant flag tapes warn of hazardous areas. Standard style
- 9" x 12" red, polyethylene plastic pennants
- Sewn onto durable cord - approx. 66" lead cord each end
- Ideal for indoor and temporary outdoor applications Heavy-Duty style
- Large 18" x 18" fluorescent orange 9-oz. vinyl laminated, nylon pennants
- Tough, tear-resistant
- Sewn onto high-tensile strength cord - approx. 20-ft. lead each end
- Ideal for extended periods outdoors, withstands harsh conditions OSHA-Compliant style
- Large 18" x 18", fluorescent orange 9-oz. vinyl laminated, nylon pennants
- Sewn onto heavy-duty reinforced chord that exceeds OSHA ’s 500 lb. tensile strength requirements
- Meets OSHA 1926.502(f)(2)(iv) withstanding the harshest conditions Part No. Description No. of Pennants UOM Standard PBB0025 60-ft. 36 Each Heavy-Duty PFM0038 83-ft. 15 Each PBB0004 113-ft. 25 OSHA-Compliant Style PFM0039 83-ft. 15 Each PBB0003 113-ft. 25 Cone sold separately
Tape | Barriers & Barricades 101
- Polyethylene (HTU, HTB) materials
- Temperature range: -30°F to 200°F (-34°C to 93°C)
- Detectible Laminated Aluminum (HTDU) materials temper
- Temperature range: -30°F to 220°F (-34°C to 104°C)
- Pre-Printed
- Indoor/outdoor rated
- Designed for direct burial
- Highly visible legend is protected from abrasion and chemicals
- Resistant to UV light, chemical atmosphere, and abrasion
- Will not biodegrade Underground Hazard Tape Part Number Legend Color (Legend/Background) Height Length Std. Pkg. Qty.In. mm Ft. m Laminated Detectable Aluminum HTDU3O-FO CAUTION FIBER OPTIC CABLE BURIED BELOW Black/Orange 3.00 76.00 1000.00 305.00 1HTDU3O-T CAUTION TELEPHONE LINE BURIED BELOW HTDU3R-E CAUTION ELECTRIC LINE BURIED BELOW Black/Red 3.00 76.00 1000.00 305.00 HTDU6O-FO CAUTION FIBER OPTIC CABLE BURIED BELOW Black/Orange 6.00 152.00 1000.00 305.00 1HTDU6O-T CAUTION TELEPHONE LINE BURIED BELOW HTDU6R-E CAUTION ELECTRIC LINE BURIED BELOW Black/Red 6.00 152.00 1000.00 305.00 Polyethylene HTU3G-T-M CAUTION TELEPHONE LINE BURIED BELOW Black/Green 3.00 76.00 1000.00 305.00 HTU3O-FO-M CAUTION BURIED FIBER OPTIC CABLE Black/Orange 3.00 76.00 1000.00 305.00 HTU3O-T-M CAUTION TELEPHONE LINE BURIED BELOW HTU3R-E-M CAUTION ELECTRIC LINE BURIED BELOW Black/Red 3.00 76.00 1000.00 305.00 HTU3Y-E-M Black/Yellow HTU6R-E CAUTION ELECTRIC LINE BURIED BELOW Black/Red 6.00 152.00 1000.00 305.00 HTU6O-FO CAUTION BURIED FIBER OPTIC CABLE Black/Orange 6.00 152.00 1000.00 305.00 HTU6O-T CAUTION TELEPHONE LINE BURIED BELOW HTU6O-TV CAUTION CABLE TV LINE BURIED BELOW HTU6Y-E CAUTION ELECTRIC LINE BURIED BELOW Black/Yellow 6.00 152.00 1000.00 305.00 HTU6Y-G CAUTION GAS LINE BURIED BELOW 800.777.3300 | Panduit.com
102 Barriers & Barricades | Tapes & Rope
of ANSI Z535.5-3.2 Reflective Plastic Barricade Tapes Woven Barricade Tapes Barricade Rope UOM Roll UOM Roll Quick and effective temporary way to section-off hazards and danger zones.
- Bold warning message continuously repeated the length of the roll
- Lightweight, 0.003" polyethylene plastic
- Durable for indoor and outdoor environments
- Easily cut and secure with nails, tape, staples or tie-off
- 3" x 1000-ft. Get reflective visibility in low light areas.
- 0.003" polyethylene tape
- Words alternate in black and reflective silver print
- 3" x 1000-ft. PBB0024 PBB0023 Mark off hazard areas with extra-strong, durable polypropylene tapes.
- Woven polypropylene
- 300-lbs. tensile strength
- Chemical- and weather-resistant
- Ideal outdoor use
- Reusable
- 2" x 200-ft. rolls Part No. Color UOM PBB0173 Black/Red Roll PBB0174 Black/Yellow Mark off restricted and hazardous areas with high visibility rope.
- Twisted strands in two-tone, contrasting safety colors
- 5/16" diameter polypropylene
- Floats, resistant to mildew and light chemical exposure
- 600-ft. per roll Black/Yellow Part No. Magenta/Yellow Part No. Red/White Part No. UOM PFM0005 PFM0006 PFM0007 Roll PBB0034 PBB0041 PBB0076 PBB0040 PBB0037 PBB0038 PBB0036 PBB0035 PBB0030 PBB0039 PBB0029 PBB0031 PBB0033 PBB0032 PBB0042 PBB0175
Set out free-standing signs to identify temporary hazardous conditions.
- Panels have message on both sides
- Rugged 0.125" thick high-impact plastic
- Folds flat for transport and storage
- 20"H x 12"W UOM Each Free Standing Signs PBB0101PBB0100 PBB0099 PBB0087 PBB0102 PBB0058 PBB0090 PBB0098 PBB0097PBB0075 7" x 5" clear pocket for holding a tag or folded permit sheet. PBB0107 PBB0104 PBB0108 PBB0088 PBB0106 PBB0091 PBB0096 PBB0105 PBB0089 PBB0103 PBB0092 PBB0093 PBB0094 PBB0095 Free Standing Signs | Barriers & Barricades 800.777.3300 | Panduit.com
104 Free Standing Signs | Barriers & Barricades
Molded 2-Sided Free Standing Signs Open up floor signs to mark temporary hazards.
- Sturdy molded plastic to withstand elements indoors and outdoors
- Message on both sides of the 12"W x 25"H free standing signs stand-up floor sign
- Easy-carry handle
- Sign folds flat for storage PBB0021 PBB0020 PBB0018 PBB0019 Reversible Free Standing Signs Mark temporary hazards with lightweight plastic stand-up signs.
- Versatile - two signs in one
- Economical - ideal for limited purposes or disposable for one-time use
- Flip and fold sign inside-out to reveal second message
- Lightweight, waterproof corrugated plastic with fold-and-insert-tab
- Stands 20"H x 12"W
- Carry handle cut-out on top
- Folds flat UOM Each Reverse PBB0134 Reverse PBB0135 Reverse PBB0136 Reverse PBB0133 Reverse PBB0127 Reverse PBB0129 Reverse PBB0137 Reverse PBB0131 Reverse PBB0128 Reverse PBB0132 Reverse PBB0130 UOM Each
105Post Barriers | Barriers & Barricades Stanchion Post Striped Post Unique, industrial design ideal for plant or facility.
- All-plastic, yellow, polyethylene post and base
- 3" dia. post stands 38"H with 16"W, low-profile fillable base
- Base has pre-drilled holes to secure to floor
- Snap lock ensures post will not pull out from base when lifted and moved
- Breaks down and stacks for compact storage
- Finishing cap and C-Hooks included
- Optional color striping in standard and specialty reflective, fluorescent, or glow-in-the-dark
- Connect several posts with 2" x 1" x 1/4" plastic chain links sold separately by the foot Ring Weight Part No. Height UOM PBB0152 38" Each Yellow Post w/ Specialty Color Vinyl Stripe Part No. Height UOM PBB0150 38" Each Yellow Post w/ Standard Color Vinyl Stripe Part No. Height UOM PBB0149 38" Each Standard Yellow Post Prevent post from easily tipping. Fill vinyl ring weight with water to add 3-lbs. for stability. The 11 3/4" x 1" ring weight fits and conceals inside the base of the post. Part No. UOM PBB0148 Each Barrier Cone Bars In an immediate situation, deploy a bar – placed between two traffic cones – to create a quick and temporary visible barrier.
- Portable, expandable barrier bar
- Ring-ends fit over traffic cones
- Expands up to 6 1/2-ft.
- Collapses to 4-ft. for storage and transport
- Available in two contrasting colors
- Reflective strips for visibility in low light conditions Part No. Color UOM PBB0078 Black/Yellow Each PBB0079 Orange/White Cones sold separately Color Code Red RED Green GRN Black BLK White WHT Blue BLU Orange ORN Magenta MAG Color Code Reflective Red RRED Reflective Yellow RYEL Reflective White RWHT Fluorescent Red REDF Fluorescent Orange ORNF Fluorescent Green GRNF Glow-in-the-Dark GLOW Add specialty stripe color code after part number. Example: Part No. PBB0152 + Color Code RRED = PBB0152RRED Add stripe color code after part number. Example: Part No. PBB0150 + Color Code MAG = PBB0150MAG 800.777.3300 | Panduit.com
106 Barriers & Barricades | Post Barriers
Set out a sturdy post and chain system that stays in place. Steel Post
- 2" dia. x 34" H powder-coated yellow steel
- 13.5" dia. base covered with durable, black ABS plastic
- Forged universal loop on top
- Indoor and outdoor use Steel Chain
- Poly-coated yellow steel
- 2/0 straight link coil - 0.18" material dia., 1.29" inside length x 0.34" inside width (Maximum continuous length is 120 ft.) White – WHT Yellow – YEL Black – BLK Red – RED Alternating White & Red – RW Alternating Black & Yellow – BY Part No. Description Color Code UOM PBB0115 Standard WHT, YEL, BLK, RED Foot PBB0115 Alternating RW, BY Part No. Description Color Code Std. Pkg. Qty. PBB0119 Standard WHT, YEL, BLK, RED 100 ft. To Order Chain Links: Add color code after part number. Example: Part No. PBB0115 + Color Code YEL = PBB0115YEL To Order Chain Accessories: Add color code after part number. Example: Part No. PBB0109 + Color Code WHT = PBB0109WHT Part No. Description Color Code UOM PBB0109 Master Link Standard WHT, YEL, BLK, RED Each PBB0138 S-Hook Standard Master Link
- Permanently joins separate lengths of chain S-Hooks
- Open ends quickly link separate lengths of chain Chain Links Steel Safety Post & Chain Part No. Description UOM PBB0164 Steel Post Each PBB0057 Bolt Snap PBB0123 Poly-Coated Steel Chain Foot Extend belt tape from the end of a storage rack.
- Mount with choice of hose clamp for semi-permanent installation or magnet for quick install and removal
- Durable 2" wide belt tape end has S-Clip to wrap and secure
- Yellow case with diagonal yellow/black striped tape or ‘Caution’ message tape To Order: Add belt style code after part number. Black/Yellow – BY, Caution – C Example: Part No. PBB0006 + Belt Style Code BY = PBB0006BY Magnetic Mount Part No. UOM Belt Length PBB0007 Each 15-ft. PBB0011 20-ft. PBB0015 25-ft. Hose Clamp Part No. UOM Belt Length PBB0006 Each 15-ft. PBB0009 20-ft. PBB0013 25-ft. Rack Mount Retractable Belt Tape Barriers Bolt Snap
- 4" nickel-plated cast zinc
- Double-ended Retractable Banner Barrier PBB0027 PPE REQUIRED BEYOND THIS POINT PBB0028 UOM Each Convey safety or warning messages with bold barriers.
- 0.060" aluminum roller housing holds 40"H x 54"W poly-vinyl banner
- Total viewable area: 32"H x 54"W
- Banner housing connects to stanchion posts via (2) paddle sleeves (included) that insert into interchangeable accessory caps (2 included)
- Sets up and breaks down easily PBB0026
- Lightweight, yet strong polyethylene plastic
- Each link measures 2" x 1" x 1/4"
- Alternating colors change every two feet
- Available by the foot up to 500-ft.
- Indoor and limited outdoor use
107Post Barriers | Barriers & Barricades Retractable Belt Tape Barriers Connect belt tape in any combination of posts and wall mounts to control pedestrian traffic indoors. To Order Post Barriers: Add belt tape color code after Post Barriers part number: Black – BLK, Yellow – YEL, Red – RED. Example: Part No. PBB0177 + Color Code BLK = PBB0177BLK Part No. Post Color UOM PBB0177 Brushed Steel EachPBB0178 Black PBB0179 Yellow Part No. Post Color UOM PBB0181STL Brushed Steel EachPBB0181BLK Black PBB0181YEL Yellow Wall Mount Retractable Belt Tape Barriers Part No. Case Color UOM PBB0045 Brushed Steel EachPBB0043 Black PBB0049 Yellow Close off doorways or hallways.
- 2"W woven-polyester tape, wound in self-tension, spring-loaded unit
- Extends up to 8-ft. without sagging, retracts smoothly
- Head unit with bracket installs with four screws
- Wall mount receiver (sold separately) connects end of belt tape to facing wall To Order: Add belt tape color code after part number: Black – BLK, Yellow – YEL, Red – RED. Example: Part No. PBB0045 + Color Code YEL = PBB0045YEL Belt Tape:
- Woven-polyester tape, wound in a self-tension, spring-loaded unit
- 2"W tape extends up to 8-ft – with straight tension without sag or slack
- Retracts smoothly back into the head unit for storage
- Safety mechanism in the spring-tension reduces the whip action of the belt braking, in case of accidental release Post Barriers:
- 2 1/2" dia. x 38"H with 14" dia. weighted base
- Available as post barrier with belt tape or as receiver posts (does not contain belt tape) Part No. UOM PBB0172 Each Wall Mount Receiver Outdoor Retractable Belt Tape Barriers Sturdy aluminum stanchion is ideal for use outdoors and in tough indoor environments
- 2 1/2" diameter aluminum post measures 40" high with a sturdy 14" diameter base
- Uses rust-proof stainless steel hardware
- Belt top has 2" wide retractable belt tape with ergonomic, rounded corner belt end and noticeable red slide action lock
- Can accept up to 3 additional belt ends from other belt tape posts
- Available with either 10-ft. or 15-ft. belt tape with contrasting black and yellow hazard stripes.
- Receiver posts available separately Part No. Description UOM PBB0001 Black Post, Head, & Base Each PBB0002 Yellow Post, Black Head & Base Aluminum Receiver Posts Accepts up to 4 belts. Does not contain belt tape. Part No. Description UOM PBB0124 Black Each PBB0125 Yellow Receiver Posts Only (Without Belt Tape) 800.777.3300 | Panduit.com
108 Motivation | Scoreboards
+ Scoreboards featuring “BEST PREVIOUS RECORD” include: One (1) electronic display to count safe days and one (1) magnetic display with changeable numbers set to track record number of days. PSTB008+ PSTB010 Electronic Safety Scoreboards Automatically count safe work days with 2 color LED display – red and green. UOM Each Turn-A-Day Scoreboards Write-A-Day Scoreboards Safety scoreboard has built-in turn dial to display safe days.
- Number dials are plastic and independently rotate from behind
- Lightweight, durable plastic
- Corner mounting holes Update safe working days on large scoreboard by writing in the number with dry-erase marker.
- Keep score of consecutive days
- Wipe-off and write-in on poly-coated space provided
- Constructed of durable plastic
- Corner mounting holes UOM Each Size UOM 20" x 14" Each 36" x 24" 36" x 24" PSTB00336" x 24" PSTB001 36" x 24" PSTB004 20" x 14" PSTB002 Marker not included. Count the number of safe work days in two colors.
- Innovative, durable, frameless construction
- Count days without an accident in green, and if a lost time accident occurs, set the display back to red until you meet your new safe-days goal
- Display can be set to count days or flash between days, date and clock
- Track the 7-day week, or set the display to track only your company’s work days
- Display count can be set to freeze or hold
- In a power failure, all information is stored*
- Tamper-proof display easily sets with handheld remote control * Indicators notify when a hold or power failure has occurred Specifications:
- For indoor use only
- 28" x 20" x 1" aluminum construction
- Built-in hidden rear mounting brackets
- Four-digit, bright LED display with 2 1/2"H numbers
- Operates on 110 VAC with 6-ft. power cord
800.777.3300 | Panduit.com 109Part Number Index
110 Part Number Index
Part Number Index 111800.777.3300 | Panduit.com
112 Part Number Index
One-piece construction for consistent performance and reliability. Application Focused Bundling Improve productivity and worker safety with the wide range of sizes, styles and materials for fastening, bundling and clamping. Increased Reliability in Harsh Environments: When strength, vibration, radiation, weathering, corrosion and temperature extremes are a factor, the Pan-Steel System provides strong, reliable solutions for use in indoor, outdoor and direct burial applications. Visit www.panduit.com for additional information Cable Ties – Built For Durability
Panduit Corp. World Headquarters Tinley Park, IL 60487 USA 800.777.3300 Visit www.panduit.com for terms and conditions © 2018 Panduit Corp. ALL RIGHTS RESERVED. SFCB14--SA-ENG REPLACES SFCB12--SA-ENG 8/2018 Customer Briefing Centre (CBC) London One Oliver Yard EC1Y 1HQ London United Kingdom Panduit Europe Ltd. Westgate, Westworld W5 1UD London United Kingdom