PCS52 PICKER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PCS52 Rev B 4/18/2017 1 of 4 DC OutPut Compact Solid State Relay PCS52 OUTPUT PARAMETERS (Ta = 35°C) Load Voltage Range 3 - 28.8 VDC Load Current 15 A Max. Surge Current (10 ms) 80 Apk Max. Off-State Leakage Current 0.1 mA Repetitive Peak Off-State Voltage 33 VDC Max. On-State Voltage Drop 0.06 VDC Max. Turn-On Time 1 ms Max. Max. Turn-Off Time 2 ms Max

FEATURES

 15 A @ 3 - 28.8 VDC MOSFET Output  Compact Package 1.520” x 1.126” (38.6mm x 28.6mm) Footprint  DC Input: 9-30 VDC  Panel Mount  2,500 VAC Opto-Isolation Between Input and Output  Screw Terminals and Quick Connects Versions  Encapsulated, Thermally Conductive Epoxy  RoHS Compliant E93379 INPUT PARAMETERS (Ta = 35°C) Control Voltage Range 9 - 30 VDC Must Turn-Off Voltage 1 VDC Max. Input Current @ 28.8 VDC 20 mA (DC) Max Reverse Protection Voltage - 30 VDC CHARACTERISTICS Dielectric Strength 2,500 VAC, 50 Hz/60 Hz, 1 min, Input to Base 2,500 VAC, 50 Hz/60 Hz, 1 min, Output to Base 2,500 VAC, 50 Hz/60 Hz, 1 min, Input to Output Insulation Resistance 1,000 MΩ at 500 VDC Operating Temperature - 30°C to 80°C Storage Temperature - 30°C to 100°C Weight 35 g

ORDERING INFORMATION

Example: PCS52 -D -3- -10 L Q Model: PCS52 Control Voltage: D: 3-30 VDC Load Voltage: 30: 30 VDC Load Current: 15: 15 A Status LED : Nil: Not Included; L: Indicator LED Terminal Type: Nil: Screw Terminal; Q: Quick Connect (1/4” Control, 3/8” Power) Box Quantity: 100; Inner Box: 2 For Accessories and Heat Sink see page 3

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PCS52 Rev B 4/18/2017 2 of 4 PRECAUTIONS PCS52 PCS52 1) When choosing a Solid State Relay (SSR), note the actual load current and ambient temperature and reference the Characteristic Curves below. 2) SSRs require a adequate heat sinking or other effective cooling measures . 3) With ambient temperature above 25°C refer to the curve of Max. Load Current vs Ambient Temperature for load current derating. 5) recommended screw installation torque as follows : M4 screw mounting will damage the SSR with heat generated from connections. Also, excessive 6) to the Current Load. With any heat sink test that the SSR base temperature does not exceed 65"C. 7) When using the PCS52 relay with an inductive load, a diode must be used in reverse parallel orientation otherwise excess voltage will easily damage the SSR. The diode must be a fast recovery type with a P IV rating greater than the supply voltage. Also, a peak current rating greater than the output current 8) Listed parameters are based on resistive loads. Do not use the relay beyond the described current, temperature, load or voltage limits as described in this data sheet . DIMENSIONS (mm) QUICK CONNECT MOUNTING LAYOUT WIRING DIAGRAM SCREW TERMINAL

3220 Commander Drive, Suite 102 Carrollton, TX 75006 www.PickerComponents.com Sales: (972) 713-6272 (888) 997-3933 Fax: (972)735-0964 e-mail: sales@pickercomponents.com Dimensions are listed for reference purposes only. Specifications and Availability subject to change without notice. PCS52 Rev B 4/18/2017 3 of 4 PCS52 PCS52 CHARACTERISTIC CURVES ACCESSORIES Heat Transfer Pad HTP50 Protective Cover SSR50 Heat Sinks PCH-I-50 for 10 Amp Applications PCH-H-110 for 15-25 Amp Application ACCESSORIES SOLD SEPERATELY