PCS05 PICKER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Printed Circuit Board Solid State Relay
FEATURES
5 amp rating @ 30 degrees C Industry standard footprint Will switch up to 440 volts 4000 volt dielectric strength Built in snubbers Back to back SCR or Triac output PCS05 Input
3 VDC to 15 VDC
Low Range (L) INPUT PARAMETERS OUTPUT PARAMETERS 48 to 264 VAC for 240 VAC rated relay Load Voltage Range Load Current Range 0.1 Amps to 5 Amps Max Surge current (10 ms) 250 Amps Peak Max on-state voltage drop 1.5 Volts Maximum 10 milliseconds 1 millisecond Maximum turn-off time 10 milliseconds Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com
3220 Commander Drive, Suite 102, Carrollton, Texas 75006
ORDERING INFORMATION
Example: PCS05 Model 240 Solid epoxy encapsulation DC Input Range L: 3 VDC to 15 VDC, H: 15 VDC to 32 VDC L GENERAL PARAMETERS Dielectric strength (input to output) Insulation Resistance Vibration Resistance Ambient operating temperature
4000 Vrms
1000 megohms @ 500VDC DA 1.5 mm 10 to 50 Hz -30 to +80 degrees C Type of Operation Output Type S: SCR, T: Triac TZ Max 3 VDC 1.5 milliamps Pending Input Voltage Min 1.0 VDC High Range (H)
15 VDC to 32 VDC
Typical Input Current 15 mA DC Load Voltage 240 or 380 Z: Zero cross turn on; R: Random turn on Must Operate Voltage Min 1.0 VDC 15 mA DC Ambient storage temperature -30 to +100 degrees C Ambient humidity 45% to 85% Weight 15 grams max 48 to 440 VAC for 380 VAC rated relay Max off-state leakage current Turn-on Time Zero Crossing Random Transient overvoltage 600 V for 240 VAC and 800 V for 380 VAC Minimum off-state dv/dt Minimum power factor 200V / micro second 0.5 Maximum Load Current vs. Ambient Temperature Maximum Load Current Amps1 Ambient Temperature (degrees C) -30 100806040200 3010 50 70
Description
The PCS05 relay is pin for pin compatible with standard OAC type I/O modules. The PCS05 is available with random turn-on as an alternate to zero-cross turn-on. The PCS05 SSR offers a choice of 240VAC or 380VAC versions and input ranges of 3 to 15 vDC and 15 to 32 VDC. All Models include an internal snubber.
Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com Dimensions in Inches (millimeters) (25.4) 1.00 Tolerances + .010 unless otherwise noted Notes: (43.1) 1.70 (5.1) .200 (17.8) .700 (27.9) 1.100 (7.0) .275 (7.6) .300 (1.0) .040 (2.5) .100 -4 +3 INPUT LOAD PRECAUTIONS 1. Soldering must be completed within 10 seconds at 260 degrees C or less or within 5 seconds at 350 degrees C. 2. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, reduce the load current. 3. The input circuitry does not incorporate a circuit protecting the SSR from a reversed polarity connection. Confirm that the polarity is correct when connecting the input.