PCS.06.A TAOGLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 21
Technical content
Features
Havok - Low Profile LTE/Cellular 2G/3G/4G SMD Dielectric Antenna SMD Dielectric Antenna GSM / CDMA / DCS / PCS / WCDMA / UMTS /HSDPA / GPRS / EDGE 698~960MHz/1710~2690MHz High Efficiency Multi-Band SMD antenna Low profile 42*10*3mm RoHs Compliant
SPE-13-8-070/G/WY Page 2 of 21 1. Introduction The Havok PCS.06.A is a low profile SMT LTE/cellular 2G/3G/4G embedded antenna designed for direct SMT mount on a device PCB. It provides high efficiency in a very small factor 42*10 *3mm. If tuning is required it can be tuned for the device environment, while there is no need for new tooling. Its rectangular shape and very small size makes it very easy to integrate – packaged in tape and reel, it can be mounted via pick and place to reflow solder directly on the edge of the PCB board. This antenna is recommended to be used with longer ground-plane lengths of 120mm or more to attain its highest rated efficiency, note the return loss and efficiency graphs on page 16. The a ntenna is suitable f or lower cost LTE/cellular applications , especially for telematics and automotive sector. Contact Taoglas local regional sales office for quick and professional support from our senior engineering team on integration and matching of the antenna to your device.
SPE-13-8-070/G/WY Page 3 of 21 2. Specification Table Electrical Frequency (MHz) 698~803 824~894 880~960 1710~1880 1850~1990 1920~2170 2500~2690 Peak Gain Average Gain Return Loss (dB)* <-10 typ. <-7 at the band edge <-10 typ. <-7 at the band edge <-10 typ. <-6 at the band edge Polarization Linear Impedance 50Ω Maximum Input Power 5W MECHANICAL Antenna Dimensions 42mm x 10mm x 3mm Material FR4 Weight 2.50g Soldering Type SMT through Reflow ENVIRONMENTAL Operation Temperature -40°C ~ +85°C Storage Temperature -40°C ~ +85°C * all measurements were done on 123*45mm EVB board with 100mm length ground plane.
SPE-13-8-070/G/WY Page 4 of 21 3. Antenna Characteristics 3.1. Return Loss 3.2. Peak Gain
SPE-13-8-070/G/WY Page 5 of 21 3.3. Average Gain 3.4. Efficiency
SPE-13-8-070/G/WY Page 6 of 21 4. Radiation Patterns Y X Z
SPE-13-8-070/G/WY Page 7 of 21 4.1. XY Plane
SPE-13-8-070/G/WY Page 8 of 21 4.2. XZ Plane
SPE-13-8-070/G/WY Page 9 of 21 4.3. YZ Plane
SPE-13-8-070/G/WY Page 10 of 21 5. Matching Circuits
SPE-13-8-070/G/WY Page 11 of 21 6. Drawing 6.1. PCS.06.a Antenna 6.2. CS.06.A antenna with Evaluation Board
SPE-13-8-070/G/WY Page 12 of 21 7. Antenna Footprint
SPE-13-8-070/G/WY Page 13 of 21 7.1. Top Copper
SPE-13-8-070/G/WY Page 14 of 21 7.2. Top Solder Paste
SPE-13-8-070/G/WY Page 15 of 21 7.3. Top Solder Mask
SPE-13-8-070/G/WY Page 16 of 21 7.4. Composite Diagram
SPE-13-8-070/G/WY Page 17 of 21 8. Packaging
SPE-13-8-070/G/WY Page 18 of 21
SPE-13-8-070/G/WY Page 19 of 21 9. Application Note Investigations of PCS.06.A antenna performance on different lengths of ground plane were conducted, the return loss is shown as below. The antenna efficiency vs. ground plane length is shown below Efficiency
SPE-13-8-070/G/WY Page 20 of 21 Peak Gain Average Gain
SPE-13-8-070/G/WY Page 21 of 21 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd.