PCR1J680MCL1GS

PCR NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCR Chip Type, High Reliability Specifications Temperature Characteristics (Max.Impedance Ratio) Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Tangent of loss angle (tan δ) ESR ( 1) Leakage Current ( 2) Performance CharacteristicsItem –55 to +125°C 16 to 80V 22 to 1000µF ± 20% at 120Hz, 20°C Less than or equal to the specified value at 120Hz, 20°C Less than or equal to the specified value at 100kHz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3(µA), whichever is greater. Endurance Shelf Life ESR after Endurance ( 1) Damp Heat (Steady State) Resistance to Soldering Heat Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 4000 hours at 125°C. Less than or equal to the specified value at 100kHz, -40°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. The duration for over +230°C temperature at capacitor surface shall not exceed 60 seconds. In case peak temperature is 260°C or less, reflow soldering shall be two times maximum. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Navy blue print on the case top Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of initial capacitance value ( 3) 150% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 20% of initial capacitance value ( 3) 150% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ( 2) ESR ( 1) Within ± 10% of the initial capacitance value ( 3) 130% or less than the initial specified value 130% or less than the initial specified value Less than or equal to the initial specified value High reliability, High voltage (to 80V). Low ESR, High ripple current. Long life of 4000 hours at 125°C. SMD type : Lead free reflow soldering condition at 260°C peak complete correspondence. Compliant to the RoHS directive (2011/65/EU). ESR after Endurance at -40°C. AEC-Q200 compliant. Please contact us for details. 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. P C R V M C L 1 1 G S Configuration Taping code Size code Capacitance tolerance (±20%) Rated capacitance (150µF) Rated voltage (35V) Series name Type Standard Vibration Resistance codeConfiguration L S Type numbering system (Example : 35V 150µF) Dimension table in next page. φD L A B C E H Size 8.0 6.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ8 × 7L 8.0 9.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ8 × 10L 8.0 11.9 9.0 8.3 8.3 3.2 0.8 to 1.1 φ8 × 12L 10.0 7.9 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10 × 8L 10.0 9.9 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10 ×10L 10.0 12.6 11.0 10.3 10.3 4.6 0.8 to 1.1 φ10×12.7L (mm) Code C V 16 D E V H J K Voltage φD L A B C E H Size 8.0 10.0 9.0 8.3 8.3 3.1 1.1 to 1.5 φ8 ×10.5L 10.0 10.0 11.0 10.3 10.3 4.6 1.1 to 1.5 φ10×10.5L 6.3 7.5 7.3 6.6 6.6 2.5 0.5 to 0.8 φ6.3 ×8L 10.0 12.7 11.0 10.3 10.3 4.6 1.1 to 1.5 φ10 ×13.2L (mm)Vibration ResistanceStandard PCR High Capacitance Long Life Assurance PCX After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Frequency coefficient of rated ripple current Frequency Coefficient 120Hz 1kHz 10kHz 100kHz or more 0.05 0.30 0.70 1.00 φ8×10L, φ 10×10L, φ 10×12.7L : The vibration structure-resistant product is also available upon request, please ask for details. C R 1 5 0 V 3 3 1 H 0.3 MAX. φD±0.5 B±0.2 A±0.2 C±0.2 0.5 MAX. E LSeries Voltage (V:35V) Plastic platform Lot No.Capacitance Negative Negative Positive Positive +0.1 -0.4 Standard Vibration Resistance H 0.3 MAX. φD±0.5 B±0.2 A±0.2 C±0.2 0.5 MAX.E L±0.5 Plastic platform Aid electrode C R 1 5 0 V 3 3 1 Series Voltage (V:35V) Lot No.Capacitance Dimensions

CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PCR Dimensions Rated Voltage (V)(code) Surge Voltage (V) 1500 3400 2200 3800 3200 4300 1200 3300 2100 3500 3100 4200 1200 3200 2100 3300 3100 4100 1200 3100 2100 3300 3100 3900 1300 2900 1900 2900 3000 3500 1100 2700 1800 2900 2800 3000 1400 1600 1700 2100 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 220 470 470 560 680 1000 150 330 330 470 560 680 100 220 220 270 330 470 150 150 220 270 330 2016 (1C) 2520 (1D) 3125 (1E) 4335 (1V) PCR1C221MCL1GS PCR1C471MCL6GS PCR1C471MCL1GS PCR1C561MCL1GS PCR1C681MCL1GS PCR1C102MCL1GS PCR1D151MCL1GS PCR1D331MCL6GS PCR1D331MCL1GS PCR1D471MCL1GS PCR1D561MCL1GS PCR1D681MCL1GS PCR1E101MCL1GS PCR1E221MCL6GS PCR1E221MCL1GS PCR1E271MCL1GS PCR1E331MCL1GS PCR1E471MCL1GS PCR1V680MCL1GS PCR1V151MCL6GS PCR1V151MCL1GS PCR1V221MCL1GS PCR1V271MCL1GS PCR1V331MCL1GS PCR1H390MCL1GS PCR1H820MCL6GS PCR1H820MCL1GS PCR1H121MCL2GS PCR1H121MCL1GS PCR1H181MCL1GS PCR1J220MCL1GS PCR1J390MCL1GS PCR1J470MCL1GS PCR1J560MCL1GS PCR1J680MCL1GS PCR1J101MCL1GS PCR1K270MCL1GS PCR1K390MCL1GS PCR1K470MCL1GS PCR1K680MCL1GS Rated Capacitance (µF) Case Size φD × L (mm) tan δ Part Number Low temp. ESR after Endurance (mΩ) (-40°C / 100kHz) Rated Ripple (mArms) (125°C / 100kHz) Initial ESR (mΩ) (20°C / 100kHz) 120 120 180 100 6350 (1H) 7963 (1J) 10080 (1K) 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 8 × 7 8 × 10 10 × 8 8 × 12 10 × 10 10 × 12.7 8 × 10 8 × 12 10 × 10 10 × 12.7 Rated ripple current (mArms) at 125°C 100kHz No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity.