PO21M-6P-SA HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
2mm Hard Metric Coaxial Connector PO21M, PO51M, PO82M Series (IEC 61076-4-101 Compliant) NEW 2001.6 I Features 1. Profile complies with 2mm hard metric This connector can be mounted on the same board as the hard metric connector. (Refer to Photos 1 and 2.) It uses Compact-PCI designated key options to identify a 3.3V or 5V system. (Hirose’s MU optical fiber series can also be mounted on the same board as the 2mm electric system connector. Refer to Photo 1) 2. Flexible Design allows for various terminations The housing (P021M series) allows for both cable mount as well as board mounted connectors. The back plane side allows both a 50ø and a 75ø straight jack as well as a right angle 50ø jack. The daughter card side allows both a 50ø and a 75ø straight plug as well as a right angle 50ø board mounted jack. 3. 50ø type and 75ø type Hirose’s unique technology assures that the high frequency characteristics of the 50ø impedance type (P051M) and 75ø impedance type (P082M) are consistent between the fully mated position and a mated position with a 1mm gap. Note: The P082M connector opening is designed in the HRS original form in order to enhance high frequency characteristics. I Applications G Base Station G Digital and Analog Switch Equipment G Digital Broadcasting Equipment G Test & Measurement Equipment G Factory Control & Automation Equipment I Summary P021M, PO51M, and P082M connector series are a plug-in type coaxial contact and an applicable housing case compliant with the 2mm hard metric standard (IEC 61076-4-101). PO21M series: Housing PO51M series: 50 ø coaxial contact PO82M series: 75 ø coaxial contact Mounted on the same board as the 2mm hard metric connector Photo 2 G 50ø type (PO51M series) G 75ø type (PO82M series) Photo 1
Jack (PO51M-J-*) Jack (PO82M-J-*) Right Angle Cable Jack (PO51M-LJ-*) Plug (PO51M-P-*) Right Angle PCB plug receptacle (PO51M-LPR- *) Plug(PO82M-P-*) (PO21M- *S-*) (PO21M- *P-*) Cable to the Backplane Daughter Card Side Housing Backplane : PO21M series Impedance 50ø type coaxial connector PO51M series Impedance 75ø type coaxial connector PO82M series (Hirose original) I Specification 50ø 75ø 1000M ø/500V DC 1000M ø/500V DC 750V AC for one minute 750V AC for one minute Inner : 6mø max. · Outer : 3mø max. Inner : 11m ø max. · Outer : 3mø max. Characteristic Impedance Voltage Standing Wave Ratio Insulation Resistance Withstand Voltage Contact Resistance Item PO51M PO82M Standard/Condition Standard/Condition I Materials PBT –––– Brass, phosphor bronze Gold plating Phosphor bronze, beryllium bronze Gold plating PTFE –––– Housing Outer Conductor Inner Conductor Insulator Part Material Finish
I Daughter Card Side: Coaxial 6-contact housing (IEC 61076-4-101 Compliant) Product No. PO21M-6P-SA HRS No. CL330-0305-4 Remark Compliant to IEC = Style L 49.95 11.4 12.25 3.2 20.7 7.33.7 12.8 6 3.7 PBT24 BRecommended PCB Layout (Component Side) 2.5 3.5 2.5 6 8- +0.05 30- Ø1.3 +0.1 2.52.5 (Not Ploted through)(Ploted through) Note The board hole pitch tolerance should be ±0.05mm. The 30-Ø1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A.
I Daughter Card Side: Coaxial 6-contact housing (Nut Insert for Board Mounting) 49.95 11.4 12.25 3.2 20.7 7.3 12.8 3.7 3.7 A A 5.1 2.1 A A PBT BRecommended PCB Layout (Component Side) Ø2.2 +0.1 0 3.5 2.5 2.5 6 6-Ø2 +0.05 2.52.5 30- Ø1.3 +0.1 (Not Ploted through)(Not Ploted through)(Ploted through) Note The board hole pitch tolerance should be ±0.05mm. The 30-Ø1.3 hole is needed to combine and use coaxial connector PO51M-LPR-PC-1A. Product No. PO21M-6P-SA-S HRS No. CL330-0306-7 Remark Nut insert product for mounting board
I Backplane Cable Side: Coaxial 6-contact housing Product No. PO21M-6S-PA PO21M-6S-PA-S HRS No. CL330-0300-0 CL330-0301-3 Remark Compliant to IEC = Style L Nut insert product for mounting board BB M2.5 (PO21M-6S-PA-S) AA (PO21M-6S-PA) AA A A PBT 4 13.45 5.5 15.4 7.57.57.57.5 0.40.55 49.95 3.75 3.75 3.75 3.75 6.256.25 3.5 4.5 Ø5.1 BRecommended PCB Layout (Component Side) Connector center line (Not plated through) (Not p lated thro ugh) 5.5 4.5 4-Ø2.6 6-Ø6.1 3.75 3.75 11-Ø2 (Not plated through) 3.75 3.75 +0.05 0 +0.1 0 +0.1 Note The board hole pitch tolerance should be ±0.05mm. The 4-Ø2.6 hole is needed to use and fix this product on the board by screws. * The above pattern shows a layout for PO21M-6S-PA. PO21M-6-PA-S needs 2 screws (M2.5) to be inserted in area #2 as shown above.
These IEC 61076-4-101 compliant keys distinguish between daughter cards with 3.3V or 5V as specified by Compact-PCI. These keys are installed into the PO21M-6S and PO21M-6P type housings to prevent mis-mating. G Product Corresponding to Compact PCI 3.3V (Y ellow) G Product Corresponding to Compact PCI 5V (Blue) Product No. HRS No. Applicable ConnectorType PCN-21-P-CK (A) PCN-21-S-CK (A) CL643-0039-3 CL643-0037-8 PO21M-6S type housing PO21M-6P type housing 3456 1278 Product No. HRS No. Applicable ConnectorType PCN-21-P-CK (B) PCN-21-S-CK (B) CL643-0040-2 CL643-0038-0 PO21M-6S type housing PO21M-6P type housing 1567 2348
Product No. HRS No. Applicable Cable PO51M-P-1.5W PO51M-P-1.5W CL330-0320-8 CL330-0321-0 1.5D-HQEW, Each kind of 1.5D-2W type cable 1.5D-HQEV, Each kind of 1.5D-2V type cable I Inline Cable Jack Product No. HRS No. Applicable Cable PO51M-J-1.5W PO51M-J-1.5W CL330-0330-1 CL330-0331-4 1.5D-HQEW, Each kind of 1.5D-2W type cable 1.5D-HQEV, Each kind of 1.5D-2V type cable I Right Angle Cable Jack Product No. HRS No. Applicable Cable PO51M-LJ-1.5W PO51M-LJ-1.5 PO51M-LJ-178-1 CL330-0340-5 CL330-0341-8 CL330-0343-3 1.5D-HQEW, Each kind of 1.5D-2W type cable 1.5D-HQEV, Each kind of 1.5D-2V type cable RG-178B/U I Right Angle PCB Receptacle Product No. HRS No. PO51M-LPR-PC-1A CL330-0315-8 50ø Impedance Coaxial Connector – PO51M Series BRecommended PCB Layout (Component Side) Ø5.7 18.9 11.5 4- 0.6M 5.7 5.711.5 3.2 Ø1.3 2.5±0.05 2.5±0.05 5±0.05 5±0.05 +0.1 0 Ø5.7 11.7 18.9 PO51M-LJ-1.5 PO51M-LJ-1.5W 13.9 M5.7 22.1 7.55 11.7 PO51M-LJ-178-1 14.2 M5.7 22.1 11.77.55
75ø Impedance Coaxial Connector – PO82M Series I Inline Cable Jack I Extraction Jig Product No. HRS No. PO51M, PO82M Plug Jig PO51M, PJ82M Jack Jig (Common to PO51, PO72 Jack Jig) PO51MP-T-1 PO51J-T-1 CL350-0137-6 CL350-0038-4 11.5 18.9 Ø5.7 11.7 18.9 Ø5.7 Product No. HRS No. Applicable Cable PO82M-P-1.5C CL330-0350-9 1.5C-QEV, Each kind of 1.5C-2V type cable Product No. HRS No. Applicable Cable PO82M-J-1.5C CL330-0351-1 1.5C-QEV, Each kind of 1.5C-2V type cable
The mating condition is shown as follows. G Lateral and Longitudinal Mating ±2±2 G Slant Mating
G Example of 50ø Impedance Type (PO51M )in Combination BUsage G Example of 75ø Impedance Type (PO82M )in Combination G Example of Custom Development (Mid plane Application) SMB economic product N.UM (P)series PO51M series One touch full rock POD1 series 75ø high precise aligned PL71 series PO82M series BNC (75)series 8.6 Ø7.6 7.65 Ø13