PCM4202DBRG4

PCM4202_14 TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 29

Technical content

SBAS290B − JULY 2003 − SEPTEMBER 2004 High-Performance 24-Bit, 216kHz Sampling Stereo Audio Analog-to-Digital Converter /C0080/C0067/C0077/C0052/C0050/C0048/C0050

FEATURES

/C0068Two High-Performance Delta-Sigma Analog-to-Digital Converters − 24-Bit Linear PCM or 1-Bit Direct Stream Digital (DSD) Output Data − Supports PCM Output Sampling Rates up to 216kHz − Supports 64fS and 128fS DSD Output Data Rates /C0068Dynamic Performance: PCM Output − Dynamic Range (VIN = −60dBFS, fIN = 1kHz, A-Weighted): 118dB − THD+N (VIN = −0.5dB, fIN = 1kHz): −105dB /C0068Dynamic Performance: DSD Output, 64fS − Dynamic Range (A-Weighted): 115dB − THD+N (V IN = −0.5dB, fIN = 1kHz): −102dB /C0068Audio Serial Port − 24-Bit Linear PCM Output Data − Master or Slave Mode Operation − Supports Left-Justified, Right-Justified, and I2S/C0069 Data Formats /C0068Additional PCM Output Features: − Linear-Phase Digital Decimation Filter − Digital High-Pass Filter for DC Removal − Clipping Flag Output for Each Channel /C0068Power Supplies: +5V Analog and +3.3V Digital /C0068Power Dissipation: − fS = 48kHz: 308mW typical − fS = 96kHz: 338mW typical − fS = 192kHz: 318mW typical /C0068Power-Down Mode /C0068Available in a SSOP-28 Package /C0068Pin- and Function-Compatible with the PCM1804

APPLICATIONS

/C0068Digital Recorders and Mixing Desks /C0068Digital Audio Effects Processors /C0068Broadcast Studio Equipment /C0068Surround-Sound Encoders /C0068High-End A/V Receivers

DESCRIPTION

The PCM4202 is a high-performance, stereo audio analog-to-digital (A/D) converter designed for professional and broadcast audio applications. The PCM4202 architecture utilizes a 1-bit delta-sigma modulator per channel, incorporating a novel density modulated dither scheme for improved dynamic performance. The PCM4202 supports 24-bit linear PCM output data, with sampling frequencies up to 216kHz. The PCM4202 can also be configured to output either 64x or 128x oversampled, 1-bit direct stream digital (DSD) data for each channel. Support for PCM and DSD output formats makes the PCM4202 suitable for a variety of digital audio recording and processing applications. The PCM4202 includes a flexible audio serial port inter- face, which supports standard audio data formats. Audio data format selection, sampling mode configuration, and high-pass filter functions are all programmed using dedi- cated control pins. The PCM4202 operates from a +5V analog power supply and a +3.3V digital power supply. The digital I/O pins are compatible with +3.3V logic families. The PCM4202 is available in a small SSOP-28 package. I2S is a registered trademark of Royal Philips Electronics B.V., The Netherlands. All other trademarks are the property of their respective owners. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 www.ti.com Copyright  2003−2004, Texas Instruments Incorporated Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range unless otherwise noted(1) PCM4202 UNIT Supply voltage VCC +6.0 V Supply voltage VDD +3.6 V Ground voltage differences (any AGND to DGND) ±0.1 V Digital input voltage FMT0, FMT1, S/M, FS0, FS1, FS2, SCKI, RST , HPFD, BCK, LRCK −0.3 to (VDD + 0.3) V Analog input voltage VINL+, VINL−, VINR+, VINR− −0.3 to (VCC + 0.3) V Input current (any pin except supplies) ±10mA V Operating temperature range −10 to +70 °C Storage temperature range, TSTG −65 to +150 °C (1)Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. PACKAGE/ORDERING INFORMATION For the most current package and ordering information, see the Package Option Addendum located at the end of this datasheet. PIN ASSIGNMENT VREF L AGNDL VCOM L VINL+ VINL− FMT0 FMT1 S/M FS0 FS1 FS2 HPFD DGND VDD VREF R AGNDR VCOM R VINR+ VINR − AGND VCC CLIPL CLIPR RST SCKI LRCK or DSDBCK BCK or DSDL DATA or DSDR PCM4202

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com Terminal Functions TERMINAL PIN NO. NAME I/O DESCRIPTION

1 VREF L Output Left Channel Voltage Reference

2 AGNDL Ground Left Channel Reference Ground

3 VCOM L Output Left Channel DC Common-mode Voltage, +2.5V Typical

4 VINL+ Input Left Channel Non-inverting Analog Input

5 VINL− Input Left Channel Inverting Analog Input

6 FMT0 Input Audio Data Format Selection

7 FMT1 Input Audio Data Format Selection

8 S/M Input Audio Serial Port Slave/Master Mode Selection (0 = Master, 1 = Slave)

9 FS0 Input Sampling Mode Selection

10 FS1 Input Sampling Mode Selection

11 FS2 Input Sampling Mode Selection

12 HPFD Input High-pass Filter Disable (Active High)

13 DGND Ground Digital Ground

14 VDD Power Digital Power Supply, +3.3V

15 DATA

Output Audio Serial Port Left and Right Channel PCM Data or Right Channel DSD Data

16 BCK

I/O Audio Serial Port Bit (or Data) Clock or Left Channel DSD Data Output

17 LRCK

I/O Audio Serial Port Left/Right (or Word) Clock or DSD Data Clock Output

18 SCKI Input System Clock

19 RST Input Reset/Power-down (Active Low with internal pull-up)

20 CLIPR Output Right Channel Clipping Flag (Active High)

21 CLIPL Output Left Channel Clipping Flag (Active High)

22 VCC Power Analog Power Supply, +5V

23 AGND Ground Analog Ground

24 VINR− Input Right Channel Inverting Analog Input

25 VINR+ Input Right Channel Non-inverting Analog Input

26 VCOM R Output Right Channel DC Common-mode Voltage, +2.5V Typical

27 AGNDR Ground Right Channel Reference Ground

28 VREF R Output Right Channel Voltage Reference

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com

ELECTRICAL CHARACTERISTICS

All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER CONDITIONS MIN TYP MAX UNITS RESOLUTION 24 Bits AUDIO DATA FORMAT Linear PCM interface formats Two’s complement, MSB first data I2S, Left or Right Justified Linear PCM word length 24 Bits Direct Stream Digital (DSD) output 1 Bit DIGITAL CHARACTERISTICS Input logic level VIH 0.7 x VDD VDD V VIL 0 0.3 x VDD V Output logic level VOH IOH = −2mA 0.8 x VDD V VOL IOL = +2mA 0.2 x VDD V Input current IIH VIN = VDD +10 µA IIL VIN = 0V −10 µA Input current(1) IIH VIN = VDD +25 µA IIL VIN = 0V −25 µA Single rate 8 54 kHz Sampling frequency(2) fS Dual rate 54 108 kHzSampling frequency fS Quad rate 108 216 kHz System clock duty cycle 45 50 55 % Single rate, SCKI = 256fS 2.048 13.824 MHz Single rate, SCKI = 384fS 3.072 20.736 MHz Single rate, SCKI = 512fS 4.096 27.648 MHz System clock frequency(2) Single rate, SCKI = 768fS 6.144 38.4 MHz System clock frequency(2) Dual rate, SCKI = 256fS 13.824 27.648 MHz Dual rate, SCKI = 384fS 20.736 38.4 MHz Quad rate, SCKI = 128fS 13.824 27.648 MHz Quad rate, SCKI = 192fS 20.736 38.4 MHz ANALOG OUTPUTS Input voltage, full-scale Differential input 6.0 VPP Input impedance 3 kΩ Common-mode rejection 85 dB DC PERFORMANCE Output offset error HPFD = 1 ±4 % of FSR Gain error ±4 % of FSR Gain mismatch channel-to-channel ±3 % of FSR (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com ELECTRICAL CHARACTERISTICS (continued) All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER UNITSMAXTYPMINCONDITIONS DYNAMIC PERFORMANCE (3) fS = 48kHz, Single Rate BW = 20Hz to 20kHz Total harmonic distortion + noiseTHD+N VIN = −0.5dBFS, fIN = 1kHz −105 −95 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 112 118 dB Dynamic range, no weighting VIN = −60dBFS, fIN = 1kHz 116 dB Channel separation 100 120 dB fS = 96kHz, Dual Rate BW = 20Hz to 40kHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −105 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 118 dB Dynamic range, no weighting VIN = −60dBFS, fIN = 1kHz 112 dB Channel separation 120 dB fS = 192kHz, Quad Rate BW = 20Hz to 40kHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −103 dB Dynamic range VIN = 0VRMS , A-Weighted 117 dB Dynamic range, no weighting VIN = 0VRMS 108 dB Channel separation 120 dB DSD Output, 64fS Rate DSDBCK = 2.8224MHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −102 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 115 dB Channel separation 120 dB DSD Output, 128fS Rate DSDBCK = 5.6448MHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −105 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 118 dB Channel separation 120 dB (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com ELECTRICAL CHARACTERISTICS (continued) All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER UNITSMAXTYPMINCONDITIONS DIGITAL DECIMATION FILTER Passband edge Single and Dual Rate 0.453fS Hz Passband ripple Single and Dual Rate ±0.005 dB Passband edge Single and Dual Rate 0.547fS Hz Stop band attenuation Single and Dual Rate −100 dB Group delay Single and Dual Rate 37/fS sec Passband edge (−0.005dB) Quad Rate 0.375fS Hz −3dB cutoff frequency Quad Rate 0.490fS Hz Passband ripple Quad Rate ±0.005 dB Passband edge Quad Rate 0.770fS Hz Stop band attenuation Quad Rate −135 dB Group delay Quad Rate 9.5/fS sec DIGITAL HIGH PASS FILTER Frequency response (−3dB) fS/48000 Hz POWER SUPPLY Voltage range VCC +4.75 +5.0 +5.25 VDC VDD +3.0 +3.3 +3.6 VDC Operating supply current VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 55 65 mA fS = 96kHz, Dual Rate 55 65 mA fS = 192kHz, Quad Rate 55 65 mA IDD VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 10 12 mA fS = 96kHz, Dual Rate 19 25 mA fS = 192kHz, Quad Rate 13 15 mA Power-down mode current VCC = +5V, VDD = +3.3V, RST = 0 ICC Clocks applied 10 mA IDD Clocks applied 2 mA Total power dissipation VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 308 365 mW fS = 96kHz, Dual Rate 338 408 mW fS = 192kHz, Quad Rate 318 375 mW (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. OVERALL CHARACTERISTICS SINGLE RATE FILTER −200 −150 −100 −50 Normalized Frequency (fS) Amplitude (dB) fS =4 8k H z STOP BAND ATTENUATION CHARACTERISTICS SINGLE RATE FILTER −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Normalized Frequency (fS ) fS =4 8k H z PASSBAND RIPPLE CHARACTERISTICS SINGLE RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS) Amplitude (dB) fS =4 8 k H z TRANSIENT BAND CHARACTERISTICS SINGLE RATE FILTER Normalized Frequency (fS) fS =4 8 k H z Amplitude (dB) −10 OVERALL CHARACTERISTICS DUAL RATE FILTER Normalized Frequency (fS ) Amplitude (dB) −50 −100 −150 −200 fS = 96kHz STOP BAND ATTENUATION CHARACTERISTICS DUAL RATE FILTER 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Amplitude (dB) fS =9 6 k H z −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. PASSBAND RIPPLE CHARACTERISTICS DUAL RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS ) Amplitude (dB) fS =9 6 k H z TRANSIENT BAND CHARACTERISTICS DUAL RATE FILTER Normalized Frequency (fS) fS = 96kHz Amplitude (dB) −10 OVERALL CHARACTERISTICS QUAD RATE FILTER Normalized Frequency (fS) −50 −100 −150 −200 fS = 192kHz Amplitude (dB) STOP BAND ATTENUATION CHARACTERISTICS QUAD RATE FILTER 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Amplitude (dB) fS = 192kHz −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150 PASSBAND RIPPLE CHARACTERISTICS QUAD RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS ) Amplitude (dB) fS =1 9 2 k H z TRANSIENT BAND CHARACTERISTICS QUAD RATE FILTER Normalized Frequency (fS) Amplitude (dB) −10 fS = 192kHz −3.90dB at 0.5fS

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. HIGH PASS FILTER STOP BAND CHARACTERISTICS Normalized Frequency (fS/1000) Amplitude (dB) −20 −40 −60 −80 −100 0.1 0.2 0.3 0.40 HIGH PASS FILTER PASSBAND CHARACTERISTICS 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS /1000) Amplitude (dB) 00 . 511 . 522 . 533 . 54 FFT PLOT (fS =4 8 k H z ,fIN = 997Hz at−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS =4 8 k H z ,fIN = 997Hz at−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS = 48kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS =9 6 k H z ,fIN = 997Hz at−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. FFT PLOT (fS =9 6 k H z ,fIN =9 9 7 H za t−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k FFT PLOT (fS = 96kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k FFT PLOT (fS = 192kHz, fIN =9 9 7 H za t−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k FFT PLOT (fS = 192kHz, fIN = 997Hz at−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k FFT PLOT (fS = 192kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k THD+N vs AMPLITUDE (fS =4 8 k H z ,fIN =1 k H z ,B W=1 0 H zt o2 0 k H z ) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. THD+N vs FREQUENCY (fS = 48kHz, Input Amplitude =−0.5dB, BW = 10Hz to 20kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 20k THD+N vs AMPLITUDE (fS =9 6 k H z ,fIN = 1kHz, BW = 10Hz to 40kHz) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 THD+N vs FREQUENCY (fS = 96kHz, Input Amplitude =−0.5dB, BW = 10Hz to 40kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 40k THD+N vs AMPLITUDE (fS =1 9 2 k H z ,fIN =1 k H z ,B W=1 0 H zt o4 0 k H z ) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 THD+N vs FREQUENCY (fS = 192kHz, Input Amplitude =−0.5dB, BW = 10Hz to 40kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 80k

modulators, providing excellent common-mode rejection. bias voltage outputs for use with external input circuitry. attenuation of −100dB for all sampling modes. Figure 1. PCM4202 Functional Block Diagram

impedance of each input pin is 3kΩ. example input buffer circuit. circuitry, as described in the following paragraphs. shifting voltage for biasing external input buffer circuitry. buffered, the output current is limited to a few hundred µA. external or low impedance nodes. the common-mode bias voltage outputs. requirements for the system clock are shown in Figure 2. Table 1. System Clock Frequencies for Common Output Sampling and Data Rates

Figure 2. System Clock Timing Requirements sampling modes, or at one of two DSD output data rates. times the desired output sampling rate. equal to 32 times the desired output sampling rate. well as the DSD Output mode. Table 2. Sampling Mode Selection for PCM Table 3. Sampling Mode Selection for PCM Slave

monitors the VDD (pin 14) and VCC (pin 22) power supplies. power-on reset sequence timing. PCM4202 before, during and after the reset operations.

1024 System Clock Periods

Figure 8. Power-On Reset Sequence

Figure 9. External Reset Sequence Figure 10. ADC Digital Output State for Reset Operations

Figure 12. Typical Connection Diagram

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com COMPATIBILITY WITH THE PCM1804 Although the PCM4202 and PCM1804 are pin- and function-compatible, there are a few differences between the two devices that the designer should be aware of. These differences are noted here for clarity. /C0068The full-scale input of the PCM4202 is 6.0VPP differential, while it is 5.0VPP for the PCM1804. This is a result of the PCM4202 having an internal +3.0V voltage reference, and the PCM1804 having an internal +2.5V voltage reference. /C0068The PCM1804 includes +5V tolerant digital inputs. The PCM4202 does not include these because the digital inputs are designed for interfacing to +3.3V logic. /C0068The reset pin (RST) pin of the PCM4202 has an internal pull-up resistor. For the PCM1804, this pin has an internal pull-down resistor. /C0068When operating in Master mode with Single Rate sampling selected, the audio serial port bit clock (BCK) is equal to 64f S for the PCM1804, while the BCK rate is equal to 128fS for the PCM4202. /C0068The following pins on the PCM4202 and PCM1804 have different names, but they perform the same functions. TERMINAL NUMBER PCM4202 TERMINAL NAME PCM1804 TERMINAL NAME

9 FS0 OSR0

10 FS1 OSR1

11 FS2 OSR2

12 HPFD BYPAS

20 CLIPR OVFR

21 CLIPL OVFL

www.ti.com 13-May-2013 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) Op Temp (°C) Top-Side Markings (4) Samples PCM4202DB ACTIVE SSOP DB 28 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBG4 ACTIVE SSOP DB 28 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBR ACTIVE SSOP DB 28 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBRG4 ACTIVE SSOP DB 28 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBT ACTIVE SSOP DB 28 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBTG4 ACTIVE SSOP DB 28 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.

www.ti.com 13-May-2013 Addendum-Page 2 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF PCM4202 :

• Enhanced Product: PCM4202-EP NOTE: Qualified Version Definitions:
• Enhanced Product - Supports Defense, Aerospace and Medical Applications

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 Pack Materials-Page 1

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) PCM4202DBT SSOP DB 28 250 210.0 185.0 35.0 PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2013 Pack Materials-Page 2

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01

28 PINS SHOWN

8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic”are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2014, Texas Instruments Incorporated