PCM4202DB

PCM4202 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 32

Technical content

SBAS290B − JULY 2003 − SEPTEMBER 2004 High-Performance 24-Bit, 216kHz Sampling Stereo Audio Analog-to-Digital Converter /C0080/C0067/C0077/C0052/C0050/C0048/C0050

FEATURES

/C0068Two High-Performance Delta-Sigma Analog-to-Digital Converters − 24-Bit Linear PCM or 1-Bit Direct Stream Digital (DSD) Output Data − Supports PCM Output Sampling Rates up to 216kHz − Supports 64fS and 128fS DSD Output Data Rates /C0068Dynamic Performance: PCM Output − Dynamic Range (VIN = −60dBFS, fIN = 1kHz, A-Weighted): 118dB − THD+N (VIN = −0.5dB, fIN = 1kHz): −105dB /C0068Dynamic Performance: DSD Output, 64fS − Dynamic Range (A-Weighted): 115dB − THD+N (V IN = −0.5dB, fIN = 1kHz): −102dB /C0068Audio Serial Port − 24-Bit Linear PCM Output Data − Master or Slave Mode Operation − Supports Left-Justified, Right-Justified, and I2S/C0069 Data Formats /C0068Additional PCM Output Features: − Linear-Phase Digital Decimation Filter − Digital High-Pass Filter for DC Removal − Clipping Flag Output for Each Channel /C0068Power Supplies: +5V Analog and +3.3V Digital /C0068Power Dissipation: − fS = 48kHz: 308mW typical − fS = 96kHz: 338mW typical − fS = 192kHz: 318mW typical /C0068Power-Down Mode /C0068Available in a SSOP-28 Package /C0068Pin- and Function-Compatible with the PCM1804

APPLICATIONS

/C0068Digital Recorders and Mixing Desks /C0068Digital Audio Effects Processors /C0068Broadcast Studio Equipment /C0068Surround-Sound Encoders /C0068High-End A/V Receivers

DESCRIPTION

The PCM4202 is a high-performance, stereo audio analog-to-digital (A/D) converter designed for professional and broadcast audio applications. The PCM4202 architecture utilizes a 1-bit delta-sigma modulator per channel, incorporating a novel density modulated dither scheme for improved dynamic performance. The PCM4202 supports 24-bit linear PCM output data, with sampling frequencies up to 216kHz. The PCM4202 can also be configured to output either 64x or 128x oversampled, 1-bit direct stream digital (DSD) data for each channel. Support for PCM and DSD output formats makes the PCM4202 suitable for a variety of digital audio recording and processing applications. The PCM4202 includes a flexible audio serial port inter- face, which supports standard audio data formats. Audio data format selection, sampling mode configuration, and high-pass filter functions are all programmed using dedi- cated control pins. The PCM4202 operates from a +5V analog power supply and a +3.3V digital power supply. The digital I/O pins are compatible with +3.3V logic families. The PCM4202 is available in a small SSOP-28 package. I2S is a registered trademark of Royal Philips Electronics B.V., The Netherlands. All other trademarks are the property of their respective owners. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 www.ti.com Copyright  2003−2004, Texas Instruments Incorporated Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range unless otherwise noted(1) PCM4202 UNIT Supply voltage VCC +6.0 V Supply voltage VDD +3.6 V Ground voltage differences (any AGND to DGND) ±0.1 V Digital input voltage FMT0, FMT1, S/M, FS0, FS1, FS2, SCKI, RST , HPFD, BCK, LRCK −0.3 to (VDD + 0.3) V Analog input voltage VINL+, VINL−, VINR+, VINR− −0.3 to (VCC + 0.3) V Input current (any pin except supplies) ±10mA V Operating temperature range −10 to +70 °C Storage temperature range, TSTG −65 to +150 °C (1)Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. PACKAGE/ORDERING INFORMATION For the most current package and ordering information, see the Package Option Addendum located at the end of this datasheet. PIN ASSIGNMENT VREF L AGNDL VCOM L VINL+ VINL− FMT0 FMT1 S/M FS0 FS1 FS2 HPFD DGND VDD VREF R AGNDR VCOM R VINR+ VINR − AGND VCC CLIPL CLIPR RST SCKI LRCK or DSDBCK BCK or DSDL DATA or DSDR PCM4202

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com Terminal Functions TERMINAL PIN NO. NAME I/O DESCRIPTION

1 VREF L Output Left Channel Voltage Reference

2 AGNDL Ground Left Channel Reference Ground

3 VCOM L Output Left Channel DC Common-mode Voltage, +2.5V Typical

4 VINL+ Input Left Channel Non-inverting Analog Input

5 VINL− Input Left Channel Inverting Analog Input

6 FMT0 Input Audio Data Format Selection

7 FMT1 Input Audio Data Format Selection

8 S/M Input Audio Serial Port Slave/Master Mode Selection (0 = Master, 1 = Slave)

9 FS0 Input Sampling Mode Selection

10 FS1 Input Sampling Mode Selection

11 FS2 Input Sampling Mode Selection

12 HPFD Input High-pass Filter Disable (Active High)

13 DGND Ground Digital Ground

14 VDD Power Digital Power Supply, +3.3V

15 DATA

Output Audio Serial Port Left and Right Channel PCM Data or Right Channel DSD Data

16 BCK

I/O Audio Serial Port Bit (or Data) Clock or Left Channel DSD Data Output

17 LRCK

I/O Audio Serial Port Left/Right (or Word) Clock or DSD Data Clock Output

18 SCKI Input System Clock

19 RST Input Reset/Power-down (Active Low with internal pull-up)

20 CLIPR Output Right Channel Clipping Flag (Active High)

21 CLIPL Output Left Channel Clipping Flag (Active High)

22 VCC Power Analog Power Supply, +5V

23 AGND Ground Analog Ground

24 VINR− Input Right Channel Inverting Analog Input

25 VINR+ Input Right Channel Non-inverting Analog Input

26 VCOM R Output Right Channel DC Common-mode Voltage, +2.5V Typical

27 AGNDR Ground Right Channel Reference Ground

28 VREF R Output Right Channel Voltage Reference

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com

ELECTRICAL CHARACTERISTICS

All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER CONDITIONS MIN TYP MAX UNITS RESOLUTION 24 Bits AUDIO DATA FORMAT Linear PCM interface formats Two’s complement, MSB first data I2S, Left or Right Justified Linear PCM word length 24 Bits Direct Stream Digital (DSD) output 1 Bit DIGITAL CHARACTERISTICS Input logic level VIH 0.7 x VDD VDD V VIL 0 0.3 x VDD V Output logic level VOH IOH = −2mA 0.8 x VDD V VOL IOL = +2mA 0.2 x VDD V Input current IIH VIN = VDD +10 µA IIL VIN = 0V −10 µA Input current(1) IIH VIN = VDD +25 µA IIL VIN = 0V −25 µA Single rate 8 54 kHz Sampling frequency(2) fS Dual rate 54 108 kHzSampling frequency fS Quad rate 108 216 kHz System clock duty cycle 45 50 55 % Single rate, SCKI = 256fS 2.048 13.824 MHz Single rate, SCKI = 384fS 3.072 20.736 MHz Single rate, SCKI = 512fS 4.096 27.648 MHz System clock frequency(2) Single rate, SCKI = 768fS 6.144 38.4 MHz System clock frequency(2) Dual rate, SCKI = 256fS 13.824 27.648 MHz Dual rate, SCKI = 384fS 20.736 38.4 MHz Quad rate, SCKI = 128fS 13.824 27.648 MHz Quad rate, SCKI = 192fS 20.736 38.4 MHz ANALOG OUTPUTS Input voltage, full-scale Differential input 6.0 VPP Input impedance 3 kΩ Common-mode rejection 85 dB DC PERFORMANCE Output offset error HPFD = 1 ±4 % of FSR Gain error ±4 % of FSR Gain mismatch channel-to-channel ±3 % of FSR (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com ELECTRICAL CHARACTERISTICS (continued) All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER UNITSMAXTYPMINCONDITIONS DYNAMIC PERFORMANCE (3) fS = 48kHz, Single Rate BW = 20Hz to 20kHz Total harmonic distortion + noiseTHD+N VIN = −0.5dBFS, fIN = 1kHz −105 −95 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 112 118 dB Dynamic range, no weighting VIN = −60dBFS, fIN = 1kHz 116 dB Channel separation 100 120 dB fS = 96kHz, Dual Rate BW = 20Hz to 40kHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −105 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 118 dB Dynamic range, no weighting VIN = −60dBFS, fIN = 1kHz 112 dB Channel separation 120 dB fS = 192kHz, Quad Rate BW = 20Hz to 40kHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −103 dB Dynamic range VIN = 0VRMS , A-Weighted 117 dB Dynamic range, no weighting VIN = 0VRMS 108 dB Channel separation 120 dB DSD Output, 64fS Rate DSDBCK = 2.8224MHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −102 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 115 dB Channel separation 120 dB DSD Output, 128fS Rate DSDBCK = 5.6448MHz Total harmonic distortion + noise THD+N VIN = −0.5dBFS, fIN = 1kHz −105 dB Dynamic range VIN = −60dBFS, fIN = 1kHz, A-Weighted 118 dB Channel separation 120 dB (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com ELECTRICAL CHARACTERISTICS (continued) All parameters are specified at TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. System clock frequency is equal to 256fS for Single and Dual Rate sampling modes, and 128fS for Quad Rate sampling mode. PCM4202 PARAMETER UNITSMAXTYPMINCONDITIONS DIGITAL DECIMATION FILTER Passband edge Single and Dual Rate 0.453fS Hz Passband ripple Single and Dual Rate ±0.005 dB Passband edge Single and Dual Rate 0.547fS Hz Stop band attenuation Single and Dual Rate −100 dB Group delay Single and Dual Rate 37/fS sec Passband edge (−0.005dB) Quad Rate 0.375fS Hz −3dB cutoff frequency Quad Rate 0.490fS Hz Passband ripple Quad Rate ±0.005 dB Passband edge Quad Rate 0.770fS Hz Stop band attenuation Quad Rate −135 dB Group delay Quad Rate 9.5/fS sec DIGITAL HIGH PASS FILTER Frequency response (−3dB) fS/48000 Hz POWER SUPPLY Voltage range VCC +4.75 +5.0 +5.25 VDC VDD +3.0 +3.3 +3.6 VDC Operating supply current VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 55 65 mA fS = 96kHz, Dual Rate 55 65 mA fS = 192kHz, Quad Rate 55 65 mA IDD VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 10 12 mA fS = 96kHz, Dual Rate 19 25 mA fS = 192kHz, Quad Rate 13 15 mA Power-down mode current VCC = +5V, VDD = +3.3V, RST = 0 ICC Clocks applied 10 mA IDD Clocks applied 2 mA Total power dissipation VCC = +5V, VDD = +3.3V fS = 48kHz, Single Rate 308 365 mW fS = 96kHz, Dual Rate 338 408 mW fS = 192kHz, Quad Rate 318 375 mW (1)Applies to the RST input, pin 19. (2)Single, Dual, and Quad Rate sampling modes are described within this data sheet. (3)Dynamic performance parameters are measured using an Audio Precision System Two Cascade or Cascade Plus test system. The measurement bandwidth is limited by using the Audio Precision 22Hz high-pass filter in combination with the Audio Precision 20kHz, fS/2, or a user-defined 40kHz low-pass filter. All A-weighted measurements are performed using the Audio Precision A-weighting filter in combination with the previously mentioned filters.

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. OVERALL CHARACTERISTICS SINGLE RATE FILTER −200 −150 −100 −50 Normalized Frequency (fS) Amplitude (dB) fS =4 8k H z STOP BAND ATTENUATION CHARACTERISTICS SINGLE RATE FILTER −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Normalized Frequency (fS ) fS =4 8k H z PASSBAND RIPPLE CHARACTERISTICS SINGLE RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS) Amplitude (dB) fS =4 8 k H z TRANSIENT BAND CHARACTERISTICS SINGLE RATE FILTER Normalized Frequency (fS) fS =4 8 k H z Amplitude (dB) −10 OVERALL CHARACTERISTICS DUAL RATE FILTER Normalized Frequency (fS ) Amplitude (dB) −50 −100 −150 −200 fS = 96kHz STOP BAND ATTENUATION CHARACTERISTICS DUAL RATE FILTER 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Amplitude (dB) fS =9 6 k H z −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. PASSBAND RIPPLE CHARACTERISTICS DUAL RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS ) Amplitude (dB) fS =9 6 k H z TRANSIENT BAND CHARACTERISTICS DUAL RATE FILTER Normalized Frequency (fS) fS = 96kHz Amplitude (dB) −10 OVERALL CHARACTERISTICS QUAD RATE FILTER Normalized Frequency (fS) −50 −100 −150 −200 fS = 192kHz Amplitude (dB) STOP BAND ATTENUATION CHARACTERISTICS QUAD RATE FILTER 0 0.25 0.5 0.75 1 Normalized Frequency (fS) Amplitude (dB) fS = 192kHz −10 −20 −30 −40 −50 −60 −70 −80 −90 −100 −110 −120 −130 −140 −150 PASSBAND RIPPLE CHARACTERISTICS QUAD RATE FILTER 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS ) Amplitude (dB) fS =1 9 2 k H z TRANSIENT BAND CHARACTERISTICS QUAD RATE FILTER Normalized Frequency (fS) Amplitude (dB) −10 fS = 192kHz −3.90dB at 0.5fS

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. HIGH PASS FILTER STOP BAND CHARACTERISTICS Normalized Frequency (fS/1000) Amplitude (dB) −20 −40 −60 −80 −100 0.1 0.2 0.3 0.40 HIGH PASS FILTER PASSBAND CHARACTERISTICS 0.02 −0.02 −0.04 −0.06 −0.08 −0.1 Normalized Frequency (fS /1000) Amplitude (dB) 00 . 511 . 522 . 533 . 54 FFT PLOT (fS =4 8 k H z ,fIN = 997Hz at−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS =4 8 k H z ,fIN = 997Hz at−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS = 48kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 20k FFT PLOT (fS =9 6 k H z ,fIN = 997Hz at−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. FFT PLOT (fS =9 6 k H z ,fIN =9 9 7 H za t−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k FFT PLOT (fS = 96kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 40k FFT PLOT (fS = 192kHz, fIN =9 9 7 H za t−20dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k FFT PLOT (fS = 192kHz, fIN = 997Hz at−60dB) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k FFT PLOT (fS = 192kHz, No Input [Idle]) Frequency (Hz) Amplitude (dB) −20 −40 −60 −80 −100 −120 −140 −160 −180 1k10020 10k 100k THD+N vs AMPLITUDE (fS =4 8 k H z ,fIN =1 k H z ,B W=1 0 H zt o2 0 k H z ) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C with VCC = +5V, VDD = +3.3V, and a measurement bandwidth from 20Hz to 20kHz, unless otherwise noted. THD+N vs FREQUENCY (fS = 48kHz, Input Amplitude =−0.5dB, BW = 10Hz to 20kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 20k THD+N vs AMPLITUDE (fS =9 6 k H z ,fIN = 1kHz, BW = 10Hz to 40kHz) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 THD+N vs FREQUENCY (fS = 96kHz, Input Amplitude =−0.5dB, BW = 10Hz to 40kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 40k THD+N vs AMPLITUDE (fS =1 9 2 k H z ,fIN =1 k H z ,B W=1 0 H zt o4 0 k H z ) Input Amplitude (dB) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 THD+N vs FREQUENCY (fS = 192kHz, Input Amplitude =−0.5dB, BW = 10Hz to 40kHz) Input Frequency (Hz) THD+N (dB) −90 −92 −94 −96 −98 −100 −102 −104 −106 −108 −110 −112 −114 −116 −118 −120 1k10020 10k 80k

modulators, providing excellent common-mode rejection. bias voltage outputs for use with external input circuitry. attenuation of −100dB for all sampling modes. Figure 1. PCM4202 Functional Block Diagram

impedance of each input pin is 3kΩ. example input buffer circuit. circuitry, as described in the following paragraphs. shifting voltage for biasing external input buffer circuitry. buffered, the output current is limited to a few hundred µA. external or low impedance nodes. the common-mode bias voltage outputs. requirements for the system clock are shown in Figure 2. Table 1. System Clock Frequencies for Common Output Sampling and Data Rates

Figure 2. System Clock Timing Requirements sampling modes, or at one of two DSD output data rates. times the desired output sampling rate. equal to 32 times the desired output sampling rate. well as the DSD Output mode. Table 2. Sampling Mode Selection for PCM Table 3. Sampling Mode Selection for PCM Slave

monitors the VDD (pin 14) and VCC (pin 22) power supplies. power-on reset sequence timing. PCM4202 before, during and after the reset operations.

1024 System Clock Periods

Figure 8. Power-On Reset Sequence

Figure 9. External Reset Sequence Figure 10. ADC Digital Output State for Reset Operations

Figure 12. Typical Connection Diagram

/C0080/C0067/C0077/C0052/C0050/C0048/C0050 SBAS290B − JULY 2003 − SEPTEMBER 2004 www.ti.com COMPATIBILITY WITH THE PCM1804 Although the PCM4202 and PCM1804 are pin- and function-compatible, there are a few differences between the two devices that the designer should be aware of. These differences are noted here for clarity. /C0068The full-scale input of the PCM4202 is 6.0VPP differential, while it is 5.0VPP for the PCM1804. This is a result of the PCM4202 having an internal +3.0V voltage reference, and the PCM1804 having an internal +2.5V voltage reference. /C0068The PCM1804 includes +5V tolerant digital inputs. The PCM4202 does not include these because the digital inputs are designed for interfacing to +3.3V logic. /C0068The reset pin (RST) pin of the PCM4202 has an internal pull-up resistor. For the PCM1804, this pin has an internal pull-down resistor. /C0068When operating in Master mode with Single Rate sampling selected, the audio serial port bit clock (BCK) is equal to 64f S for the PCM1804, while the BCK rate is equal to 128fS for the PCM4202. /C0068The following pins on the PCM4202 and PCM1804 have different names, but they perform the same functions. TERMINAL NUMBER PCM4202 TERMINAL NAME PCM1804 TERMINAL NAME

9 FS0 OSR0

10 FS1 OSR1

11 FS2 OSR2

12 HPFD BYPAS

20 CLIPR OVFR

21 CLIPL OVFL

www.ti.com 23-May-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) PCM4202DB Active Production SSOP (DB) | 28 50 | TUBE Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DB.B Active Production SSOP (DB) | 28 50 | TUBE Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBR Active Production SSOP (DB) | 28 1000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBR.B Active Production SSOP (DB) | 28 1000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBR1G4.B Active Production SSOP (DB) | 28 1000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBT Active Production SSOP (DB) | 28 250 | SMALL T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBT.B Active Production SSOP (DB) | 28 250 | SMALL T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 PCM4202DBTG4 Active Production SSOP (DB) | 28 250 | SMALL T&R Yes NIPDAU Level-2-260C-1 YEAR -10 to 70 PCM4202 (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1

www.ti.com 23-May-2025 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 23-May-2025 TAPE AND REEL INFORMATION Reel Width (W1) REEL DIMENSIONS A0B0K0WDimension designed to accommodate the component lengthDimension designed to accommodate the component thicknessOverall width of the carrier tapePitch between successive cavity centersDimension designed to accommodate the component width TAPE DIMENSIONSK0 P1B0WA0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket QuadrantsSprocket HolesQ1Q1Q2Q2Q3Q3Q4Q4User Direction of Feed P1ReelDiameter *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 23-May-2025 TAPE AND REEL BOX DIMENSIONS Width (mm) W LH *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) PCM4202DBR SSOP DB 28 1000 356.0 356.0 35.0 PCM4202DBT SSOP DB 28 250 210.0 185.0 35.0 Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 23-May-2025 TUBE L - Tube length T - Tube height W - Tube width B - Alignment groove width *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) PCM4202DB DB SSOP 28 50 530 10.5 4000 4.1 PCM4202DB.B DB SSOP 28 50 530 10.5 4000 4.1 Pack Materials-Page 3

www.ti.com PACKAGE OUTLINE C 26X 0.65 8.45 28X 0.38 0.22 8.2

7.4 TYP

0.05 MIN

0.25 GAGE PLANE 0 -8

2 MAX

B 5.6 5.0 NOTE 4 A 10.5 9.9 NOTE 3 0.95 0.55 (0.15) TYP SSOP - 2 mm max heightDB0028A SMALL OUTLINE PACKAGE 4214853/B 03/2018

0.15 C A B

0.1 C NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side. 5. Reference JEDEC registration MO-150. A 15 DETAIL A TYPICAL SCALE 1.500

www.ti.com EXAMPLE BOARD LAYOUT

0.07 MAX

0.07 MIN

28X (1.85) 28X (0.45) 26X (0.65) (7) (R0.05) TYP SSOP - 2 mm max heightDB0028A SMALL OUTLINE PACKAGE 4214853/B 03/2018 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE: 10X SYMM SYMM 14 15 15.000 METALSOLDER MASK OPENING METAL UNDER SOLDER MASK SOLDER MASK OPENING EXPOSED METALEXPOSED METAL SOLDER MASK DETAILS NON-SOLDER MASK DEFINED (PREFERRED) SOLDER MASK DEFINED

www.ti.com EXAMPLE STENCIL DESIGN 28X (1.85) 28X (0.45) 26X (0.65) (7) (R0.05) TYP SSOP - 2 mm max heightDB0028A SMALL OUTLINE PACKAGE 4214853/B 03/2018 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE: 10X SYMM SYMM 14 15

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2025, Texas Instruments Incorporated