PCL8010 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Page <1> V1.008/06/21 Universal Bench Work Holder Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro
Description
A really useful tool which is ideal for holding small and odd-shaped parts for filing, painting, engraving, sawing, shaping etc. The four steel pins can be placed anywhere around the head and are also useful for bending and forming wire around. Handle can be removed and the head can then be locked in a bench vice. 140mm long. Features:
- For holding small and odd shaped parts
- For filing, painting, sawing, shaping
- Comes with 8 steel pins which can be positioned as required around the head
- Also good for wire bending and forming
- Can be used hand held or head can be removed and used on bench vice
- Excellent support tool for holding odd shapes and smaller components for painting, filing, engraving, sawing and shaping
- The steel pins can be placed anywhere on the head to accommodate various shapes. Also can be used for bending and forming wire
- Head can be removed from base and fitted to a bench vice
- 140mm long
- Weight 504g Part Number Table Description Part Number Universal Bench Work Holder PCL8010/B Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.